component
TPS54327DDAR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS54327DDAR
Texas Instruments · DC-DC Converters · HSOP-8-EP
TPS54327DDAR from Texas Instruments, in a HSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input control, active high. |
| 2 | VFB | input | Converter feedback input; connect to output voltage with feedback resistor divider. |
| 3 | VREG5 | power_out | 5.5 V power supply output; a capacitor (typical 1 uF) should be connected to GND; VREG5 is not active when EN is low. |
| 4 | SS | output | Soft-start control pin; an external capacitor should be connected to GND to set the soft-start time. |
| 5 | GND | power_in | Ground pin; power ground return for switching circuit, connect sensitive SS and VFB returns to GND at a single point. |
| 6 | SW | output | Switch node connection between the high-side NFET and low-side NFET. |
| 7 | VBST | input | Supply input for the high-side FET gate drive circuit; connect a 0.1 uF capacitor between VBST and SW pins, with an internal diode connected between VREG5 and VBST. |
| 8 | VIN | power_in | Input voltage supply pin. |
| 9 | PowerPAD | power_in | Exposed PowerPAD on the back side of the package; must be soldered for appropriate thermal dissipation and must be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS54327DDAR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: HSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
tps54327ddar-etched.step/tps54327ddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54327ddar.step/tps54327ddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
1a943870377131ec, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).