component
TPS54295PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS54295PWPR
Texas Instruments · DC-DC Converters · HTSSOP-16-EP
TPS54295PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN1 | power_in | Power input (4.5V to 18V) for high-side NFET drains and supply for 5.5V linear regulator. |
| 2 | VBST1 | power_in | Bootstrap supply for high-side NFET gate drive; internal diode to VREG5, requires 0.1µF capacitor to SW1. |
| 3 | SW1 | bidirectional | Switch node for high-side and low-side NFETs; current comparator input. |
| 4 | PGND1 | power_in | Ground return for low-side MOSFET; current comparator input. |
| 5 | EN1 | input | Enable input for converter channel 1; pull high to enable operation. |
| 6 | SS1 | output | Soft-start capacitor connection; capacitor to GND sets ramp time. |
| 7 | VFB1 | input | D-CAP2 feedback input for channel 1; connect to output voltage with resistor divider. |
| 8 | GND | power_in | Signal ground; connect SSx and VFBx returns at single point. |
| 9 | VREG5 | power_out | 5.5V regulated output; requires 1µF bypass capacitor to GND, active when VIN1 applied. |
| 10 | VFB2 | input | D-CAP2 feedback input for channel 2; connect to output voltage with resistor divider. |
| 11 | SS2 | output | Soft-start capacitor connection for channel 2; capacitor to GND sets ramp time. |
| 12 | EN2 | input | Enable input for converter channel 2; pull high to enable operation. |
| 13 | PGND2 | power_in | Ground return for low-side MOSFET; current comparator input. |
| 14 | SW2 | bidirectional | Switch node for high-side and low-side NFETs; current comparator input. |
| 15 | VBST2 | power_in | Bootstrap supply for high-side NFET gate drive; internal diode to VREG5, requires 0.1µF capacitor to SW2. |
| 16 | VIN2 | power_in | Power input (4.5V to 18V) for high-side NFET drains and supply for 5.5V linear regulator. |
| 17 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS54295PWPR - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
tps54295pwpr-etched.step/tps54295pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54295pwpr.step/tps54295pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
7059564b942927cd, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).