main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps54295pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps54295pwpr: viewers · Ray
package.json tps54295pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps54295pwpr: specified limits as data (metadata.characteristics, 42 rows from the datasheet) · Ray
README.md tps54295pwpr: specified limits as data (metadata.characteristics, 42 rows from the datasheet) · Ray
tps54295pwpr-etched.fit.json tps54295pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54295pwpr-etched.glb tps54295pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54295pwpr-etched.step tps54295pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54295pwpr.glb Publish 0.1.0 · Ray
tps54295pwpr.kicad_mod Publish 0.1.0 · Ray
tps54295pwpr.kicad_sym Publish 0.1.0 · Ray
tps54295pwpr.lbr Publish 0.1.0 · Ray
tps54295pwpr.step Publish 0.1.0 · Ray

TPS54295PWPR

Texas Instruments · DC-DC Converters · HTSSOP-16-EP

TPS54295PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN1 power_in Power input (4.5V to 18V) for high-side NFET drains and supply for 5.5V linear regulator.
2 VBST1 power_in Bootstrap supply for high-side NFET gate drive; internal diode to VREG5, requires 0.1µF capacitor to SW1.
3 SW1 bidirectional Switch node for high-side and low-side NFETs; current comparator input.
4 PGND1 power_in Ground return for low-side MOSFET; current comparator input.
5 EN1 input Enable input for converter channel 1; pull high to enable operation.
6 SS1 output Soft-start capacitor connection; capacitor to GND sets ramp time.
7 VFB1 input D-CAP2 feedback input for channel 1; connect to output voltage with resistor divider.
8 GND power_in Signal ground; connect SSx and VFBx returns at single point.
9 VREG5 power_out 5.5V regulated output; requires 1µF bypass capacitor to GND, active when VIN1 applied.
10 VFB2 input D-CAP2 feedback input for channel 2; connect to output voltage with resistor divider.
11 SS2 output Soft-start capacitor connection for channel 2; capacitor to GND sets ramp time.
12 EN2 input Enable input for converter channel 2; pull high to enable operation.
13 PGND2 power_in Ground return for low-side MOSFET; current comparator input.
14 SW2 bidirectional Switch node for high-side and low-side NFETs; current comparator input.
15 VBST2 power_in Bootstrap supply for high-side NFET gate drive; internal diode to VREG5, requires 0.1µF capacitor to SW2.
16 VIN2 power_in Power input (4.5V to 18V) for high-side NFET drains and supply for 5.5V linear regulator.
17 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN1, VIN2, EN1, EN2 -0.3 20 V 5
Input voltage VBST1, VBST2 -0.3 26 V 5
Input voltage VBST1, VBST2 (10-ns transient) -0.3 28 V 10-ns transient 5
Input voltage VBST1 - SW1, VBST2 - SW2 -0.3 6.5 V 5
Input voltage VFB1, VFB2 -0.3 6.5 V 5
Input voltage SW1, SW2 -2 20 V 5
Input voltage SW1, SW2 (10-ns transient) -3 22 V 10-ns transient 5
Output voltage VREG5, SS1, SS2 -0.3 6.5 V 5
Output voltage PGND1, PGND2 -0.3 0.3 V 5
Junction temperature TJ -40 150 °C 5
Storage temperature Tstg -55 150 °C 5
Supply input voltage VIN1, VIN2 4.5 18 V 5
Input voltage VBST1, VBST2 -0.1 24 V 5
Input voltage VBST1, VBST2 (10-ns transient) -0.1 27 V 10-ns transient 5
Input voltage VBST1 - SW1, VBST2 - SW2 -0.1 5.7 V 5
Input voltage VFB1, VFB2 -0.1 5.7 V 5
Input voltage EN1, EN2 -0.1 18 V 5
Input voltage SW1, SW2 -1 18 V 5
Input voltage SW1, SW2 (10-ns transient) -3 21 V 10-ns transient 5
Output voltage VREG5, SS1, SS2 -0.1 5.7 V 5
Output voltage PGND1, PGND2 -0.1 0.1 V 5
Output voltage VO1, VO2 0.76 7 V 5
Operating junction temperature TJ -40 125 °C 5
VINx supply current IIN 1300 2000 µA TA = 25°C, VEN1 = VEN2 = 5 V, VVFB1 = VVFB2 = 0.8 V 6
VINx shutdown current IVINSDN 80 150 µA TA = 25°C, VEN1 = VEN2 = 0 V 6
VFBx threshold voltage VVFBTHLx 758 765 773 mV TA = 25°C, VCH1 = 3.3 V, VCH2 = 1.5 V 6
Temperature coefficient TCVFBx -115 115 ppm/℃ On the basis of 25°C 6
VFBx input current IVFBx -0.35 0.2 0.35 µA VVFBx = 0.8 V, TA = 25°C 6
ENx input resistance RENx_IN 225 450 900 kΩ VENx = 12 V 6
SSx charge current ISSC -8.4 -8 -7.6 µA VSSx = 0.5 V, TA = 25℃ 6
ISSC temperature coefficient (PWP) TCISSC -4 3 nA/°C On the basis of 25°C (PWP) 6
SSx discharge current ISSD 3 7 10 mA VSSx = 0.5 V 6
Current limit IOCL 2.7 3.9 4.5 A LOUT = 2.2 µH (1) 6
Output OVP trip threshold VOVP 115 120 125 % measured on VFBx 7
Output UVP trip threshold VUVP 63 68 73 % measured on VFBx 7
Output UVP enable delay (UVP enable delay and soft-start time multiplier) TUVPEN 1.4 1.7 2 × UVP enable delay and soft-start time 7
Thermal resistance junction-to-ambient RθJA 47.5 °C/W PWP (HTSSOP) 16-pin 6
Thermal resistance junction-to-case (top) RθJC(top) 27.1 °C/W PWP (HTSSOP) 16-pin 6
Thermal resistance junction-to-board RθJB 20.8 °C/W PWP (HTSSOP) 16-pin 6
Junction-to-top characterization parameter ψJT 1 °C/W PWP (HTSSOP) 16-pin 6
Junction-to-board characterization parameter ψJB 20.6 °C/W PWP (HTSSOP) 16-pin 6
Thermal resistance junction-to-case (bottom) RθJC(bot) 2.7 °C/W PWP (HTSSOP) 16-pin 6

CAD (KiCad official)

  • Symbol: TPS54295PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps54295pwpr-etched.step / tps54295pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54295pwpr.step / tps54295pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 7059564b942927cd, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF