component
TPS53647RTAT
Public Made by Adomby adom
Texas Instruments AC-DC Controllers & Regulators, QFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
tps53647rtat: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
d6aacc6
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406
{
"schema_version": 1,
"type": "component",
"slug": "tps53647rtat",
"title": "TPS53647RTAT",
"brief": "Texas Instruments AC-DC Controllers & Regulators, QFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power supply chip",
"tps53647rtat",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TPS53647RTAT",
"manufacturer": "Texas Instruments",
"package": "QFN-40-EP(6x6)",
"pin_count": 41,
"category": "Power Supply Chip",
"subcategory": "AC-DC Controllers & Regulators",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps53647",
"parts": {
"symbol": "tps53647rtat.kicad_sym",
"footprint": "tps53647rtat.kicad_mod",
"model_3d": "tps53647rtat-etched.glb",
"model_3d_plain": "tps53647rtat.glb",
"model_3d_step": "tps53647rtat-etched.step",
"model_3d_step_plain": "tps53647rtat.step",
"lbr": "tps53647rtat.lbr"
},
"distributor_links": {
"lcsc": "C272127"
},
"pins": [
{
"number": "1",
"name": "OCL-R",
"type": "input",
"description": "Voltage divider to VREF and GND sets one of 16 per-phase overcurrent limit levels (23-72 A) and one of four ramp levels (40-200 mVp-p); device latches settings when V3R3 powers up."
},
{
"number": "2",
"name": "IMON",
"type": "output",
"description": "Analog current monitor output generated from summed individual phase currents; output voltage VIMON = F × VREF × (total current) / (IMAX × 35kΩ)."
},
{
"number": "3",
"name": "CSP1",
"type": "input",
"description": "Positive current sense input for phase 1 from TI smart power stage (ex: CSD95372BQ5MC); connect to IOUT pin with 5 mV/A gain."
},
{
"number": "4",
"name": "CSP2",
"type": "input",
"description": "Positive current sense input for phase 2 from TI smart power stage; tie to V3R3 pin to disable phase 2 operation."
},
{
"number": "5",
"name": "CSP3",
"type": "input",
"description": "Positive current sense input for phase 3 from TI smart power stage; tie to V3R3 pin to disable phase 3 operation."
},
{
"number": "6",
"name": "CSP4",
"type": "input",
"description": "Positive current sense input for phase 4 from TI smart power stage; tie to V3R3 pin to disable phase 4 operation."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No connection; leave pin open or pull up to V3R3 pin."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No connection; leave pin open or pull up to V3R3 pin."
},
{
"number": "9",
"name": "VSP",
"type": "input",
"description": "Positive input of remote voltage sense amplifier with typical input bias current of 300 µA; connect directly to load output voltage with differential pair spacing ≤ 10 mil."
},
{
"number": "10",
"name": "VSN",
"type": "input",
"description": "Negative input of remote voltage sense amplifier with typical input bias current of -23 µA; connect directly to load ground."
},
{
"number": "11",
"name": "COMP",
"type": "output",
"description": "Output of gM error amplifier (gain typically 1000 µS); external resistors and capacitors connected between this pin and VREF set compensation network."
},
{
"number": "12",
"name": "ISUM",
"type": "output",
"description": "Summed phase current output; resistor (RISUM) connected between this pin and VREF determines droop load-line (VDROOP = gM(isum) × RISUM × RCS × IOUT / 6)."
},
{
"number": "13",
"name": "VREF",
"type": "power_out",
"description": "1.7-V, 500-µA LDO reference voltage output; bypass to GND with 0.33 µF ceramic capacitor and connect to REFIN pin of TI smart power stages."
},
{
"number": "14",
"name": "V3R3",
"type": "power_out",
"description": "3.3-V LDO output generated from V5 with startup time ~600 µs when V5 exceeds 4.25 V; bypass to GND with 1-4.7 µF ceramic capacitor."
},
{
"number": "15",
"name": "V5",
"type": "power_in",
"description": "5-V power input for internal analog circuits with UVLO threshold 4.25 V (ok) and 4.05 V (fault) and hysteresis of 0.23 V typical; bypass to GND with 1-4.7 µF ceramic capacitor."
},
{
"number": "16",
"name": "VIN",
"type": "power_in",
"description": "Input voltage supply (4.5-17 V range) used for input voltage sensing, on-time control, and input undervoltage lockout (UVLO) with four selectable thresholds from 4.5 V to 10.3 V."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Ground pin; connect to ground plane with multiple vias for low impedance return path."
},
{
"number": "18",
"name": "VR_RDY",
"type": "output",
"description": "Power good open-drain output (36-50 Ω pull-down resistance at 0.31 V) asserted low when output voltage < (VDAC - VDROOP - 207 mV) or during startup; typically pulled up to V3R3 through 3 kΩ resistor."
},
{
"number": "19",
"name": "VR_HOT",
"type": "output",
"description": "Thermal flag open-drain output asserted low when sensed temperature exceeds TMAX threshold (110 °C default); typically pulled up to V3R3 through 3 kΩ resistor."
},
{
"number": "20",
"name": "GND",
"type": "power_in",
"description": "Ground pin connected to GND (not IC ground); connect to GND return path."
},
{
"number": "21",
"name": "RESET",
"type": "input",
"description": "Reset pin with logic low threshold 0.8 V and logic high threshold 1.2 V; if held low > 1000 ns, controller pulls output voltage to VBOOT level with reset delay > 1 µs."
},
{
"number": "22",
"name": "GND",
"type": "power_in",
"description": "Ground pin; connect to ground plane."
},
{
"number": "23",
"name": "ENABLE",
"type": "input",
"description": "VR enable pin with 1-V I/O level logic (low threshold 0.3 V, high threshold 0.8 V) and 100-ns debounce; controls device on/off operation."
},
{
"number": "24",
"name": "PMB_CLK",
"type": "input",
"description": "I2C PMBus clock input supporting 100 kHz and 400 kHz bus speeds; compatible with 3.3-V and 1.8-V logic levels."
},
{
"number": "25",
"name": "PMB_ALERT",
"type": "bidirectional",
"description": "I2C PMBus interrupt line with open-drain output (asserts low on faults/warnings); compatible with 3.3-V and 1.8-V logic levels and supports SMBus alert response protocol."
},
{
"number": "26",
"name": "PMB_DIO",
"type": "bidirectional",
"description": "I2C PMBus digital I/O data line; compatible with 3.3-V and 1.8-V logic levels for PMBus serial communication."
},
{
"number": "27",
"name": "VR_FAULT",
"type": "output",
"description": "VR fault indicator open-drain output asserted low for input overcurrent fault, over-temperature fault (>125 °C), output overvoltage fault (>VDAC + offset), or power stage fault; typically pulled up to V3R3 through 3 kΩ resistor."
},
{
"number": "28",
"name": "ADDR-TRISE",
"type": "input",
"description": "Voltage divider to VREF pin; resistor (RADDR-TRISE) sets 3 bits for soft-start rise slew rate (1, 1/2, 1/4, 1/8 rates) and LSB of boot voltage; voltage sets 4 bits of PMBus address (16 possible addresses)."
},
{
"number": "29",
"name": "SLEW-MODE",
"type": "input",
"description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) sets one of eight output voltage slew rates (0.34-2.74 mV/µs); voltage sets 4-bit operation mode bits including VR12.0/12.5, phase interleaving, dynamic phase shedding, and zero load-line."
},
{
"number": "30",
"name": "O-USR",
"type": "input",
"description": "Voltage divider to VREF pin; resistor (RO-USR) selects one of seven overshoot reduction (OSR) thresholds (30-140 mV) or OFF; voltage sets one of seven undershoot reduction (USR) levels (20-140 mV) or OFF."
},
{
"number": "31",
"name": "VBOOT",
"type": "input",
"description": "Voltage divider to VREF pin; resistor (RVBOOT) sets 3 bits (B[3:1]) of boot voltage VID; voltage (VVBOOT) sets 4 bits (B[7:4]); together with ADDR-TRISE bit 0 sets 7 of 8 bits of boot voltage."
},
{
"number": "32",
"name": "F-IMAX",
"type": "input",
"description": "Voltage divider to VREF pin; resistor (RF-IMAX) sets switching frequency (300 kHz to 1 MHz); voltage (VF-IMAX) sets maximum operating current IMAX (8-bit A/D: IMAX = VF-IMAX / VVREF × 255)."
},
{
"number": "33",
"name": "NC",
"type": "unconnected",
"description": "No connection; leave pin open or pull up to V3R3 pin."
},
{
"number": "34",
"name": "NC",
"type": "unconnected",
"description": "No connection; leave pin open or pull up to V3R3 pin."
},
{
"number": "35",
"name": "PWM4",
"type": "output",
"description": "PWM output signal for phase 4 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."
},
{
"number": "36",
"name": "PWM3",
"type": "output",
"description": "PWM output signal for phase 3 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."
},
{
"number": "37",
"name": "PWM2",
"type": "output",
"description": "PWM output signal for phase 2 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."
},
{
"number": "38",
"name": "PWM1",
"type": "output",
"description": "PWM output signal for phase 1 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."
},
{
"number": "39",
"name": "SKIP-NVM",
"type": "output",
"description": "Configuration mode select output and SKIP/FCCM mode signal; resistor ≤20 kΩ selects pinstrap mode, ≥100 kΩ selects NVM mode; can connect to FCCM pin of TI smart power stages for skip/continuous conduction mode operation."
},
{
"number": "40",
"name": "TSEN",
"type": "input",
"description": "Temperature sense input for highest temperature of power stages (maximum sensed: 127.9 °C); connects to TAO/FAULT pin of TI smart power stages; over-temperature fault threshold 125 °C default with 15 °C hysteresis."
},
{
"number": "41",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad connection not explicitly listed as a numbered pin in QFN-40-EP package, but is mentione",
"exposed pad 41 added from the footprint"
],
"pages_sent": 123,
"cost_usd": 1.1006,
"at": "2026-09-22T14:23:51"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps53647",
"pages": 123,
"sha256": "2a0c7fc1d7dab847",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 41,
"described": 41,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps53647rtat.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
6,
1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "e5b4286c2329085d9ef7f90d5eb5bf41a435241ecc1baaf1383823b6d6a946ae",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps53647rtat-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
6,
1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4368219c7ef6e3305679b86df8474ddce5a88a1c16441d5fa9394e61db99f9d9",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "QFN-40-EP(6x6)",
"Category": "Power Supply Chip",
"Pins": "41"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tps53647rtat"
],
"discovery_pitch": "TPS53647RTAT (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps53647rtat.kicad_sym",
"tps53647rtat.kicad_mod",
"tps53647rtat.glb",
"tps53647rtat.step",
"tps53647rtat.lbr",
"docs/hero.png",
"docs/tps53647rtat-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-25T12:05:25.172Z"
}