main
Ray tps53647rtar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 8c33d92
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps53647rtar",
  "title": "TPS53647RTAR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps53647rtar",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS53647RTAR",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-40-EP(6x6)",
    "pin_count": 41,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps53647",
    "parts": {
      "symbol": "tps53647rtar.kicad_sym",
      "footprint": "tps53647rtar.kicad_mod",
      "model_3d": "tps53647rtar-etched.glb",
      "model_3d_plain": "tps53647rtar.glb",
      "model_3d_step": "tps53647rtar-etched.step",
      "model_3d_step_plain": "tps53647rtar.step",
      "lbr": "tps53647rtar.lbr"
    },
    "distributor_links": {
      "lcsc": "C2659348",
      "digikey": "296-51986-2-ND",
      "mouser": "595-TPS53647RTAR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T14:35:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-51986-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS53647RTAR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OCL-R",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (ROCL-R) to GND sets per-phase overcurrent limit level and selects ramp amplitude from four options."
      },
      {
        "number": "2",
        "name": "IMON",
        "type": "output",
        "description": "Analog current monitor output; resistor to GND generates output voltage proportional to sum of phase currents at 5 mV/A scaling."
      },
      {
        "number": "3",
        "name": "CSP1",
        "type": "input",
        "description": "Positive current sense input for phase 1; connect to IOUT pin of TI smart power stages; tie CSP1 to V3R3 to disable phase 1."
      },
      {
        "number": "4",
        "name": "CSP2",
        "type": "input",
        "description": "Positive current sense input for phase 2; connect to IOUT pin of TI smart power stages; tie CSP2 to V3R3 to disable phase 2."
      },
      {
        "number": "5",
        "name": "CSP3",
        "type": "input",
        "description": "Positive current sense input for phase 3; connect to IOUT pin of TI smart power stages; tie CSP3 to V3R3 to disable phase 3."
      },
      {
        "number": "6",
        "name": "CSP4",
        "type": "input",
        "description": "Positive current sense input for phase 4; connect to IOUT pin of TI smart power stages; tie CSP4 to V3R3 to disable phase 4."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; leave the pin open or pull up to V3R3 pin."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "9",
        "name": "VSP",
        "type": "input",
        "description": "Positive input of the remote voltage sense amplifier; connect directly to the output voltage being regulated."
      },
      {
        "number": "10",
        "name": "VSN",
        "type": "input",
        "description": "Negative input of the remote voltage sense amplifier; connect directly to GND of the load for accurate output voltage sensing."
      },
      {
        "number": "11",
        "name": "COMP",
        "type": "output",
        "description": "Output of the gM error amplifier; resistors and capacitors between this pin and VREF pin set the feedback compensation network."
      },
      {
        "number": "12",
        "name": "ISUM",
        "type": "output",
        "description": "Current sum output; resistor (RISUM) to VREF pin determines the load-line droop voltage as function of output current."
      },
      {
        "number": "13",
        "name": "VREF",
        "type": "power_out",
        "description": "1.7-V, 500-µA, LDO reference voltage output; bypass to GND with 0.33 µF capacitor; connect to REFIN of TI power stages as current-sense reference."
      },
      {
        "number": "14",
        "name": "V3R3",
        "type": "power_out",
        "description": "3.3-V LDO output from V5; bypass to GND with 1-µF or larger ceramic capacitor; powers internal digital circuits and provides pull-up source for open-drain outputs."
      },
      {
        "number": "15",
        "name": "V5",
        "type": "power_in",
        "description": "5-V power input; bypass to GND with 1-µF or larger ceramic capacitor; supplies all internal analog circuits; rated 4.5 V to 5.5 V operating range."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage supply; also used for input voltage sensing for on-time control and UVLO detection; rated 4.5 V to 17 V operating range."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin (IC ground); primary ground reference for all internal circuits."
      },
      {
        "number": "18",
        "name": "VR_RDY",
        "type": "tri_state",
        "description": "Power good open-drain output; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts high when output voltage in regulation within UVP/OVP thresholds."
      },
      {
        "number": "19",
        "name": "VR_HOT",
        "type": "tri_state",
        "description": "Thermal flag open-drain output, active low; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts low when sensed temperature exceeds 110°C default warning threshold."
      },
      {
        "number": "20",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to GND (noted as not IC ground pin in schematic context)."
      },
      {
        "number": "21",
        "name": "RESET",
        "type": "input",
        "description": "Reset pin; if low for more than 1000 ns, controller pulls output voltage to VBOOT level for adaptive voltage scaling reset function."
      },
      {
        "number": "22",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to GND (noted as not IC ground pin in schematic context)."
      },
      {
        "number": "23",
        "name": "ENABLE",
        "type": "input",
        "description": "VR enable control pin; 1-V I/O level with 100-ns debounce; high enables output, low disables output and enters standby mode."
      },
      {
        "number": "24",
        "name": "PMB_CLK",
        "type": "input",
        "description": "I2C PMBus clock input; 3.3-V and 1.8-V logic level compatible; part of PMBus communication protocol supporting 100 kHz and 400 kHz bus speeds."
      },
      {
        "number": "25",
        "name": "PMB_ALERT",
        "type": "tri_state",
        "description": "I2C PMBus interrupt line, open-drain output; 3.3-V and 1.8-V logic level compatible; asserts low to alert master of fault condition on PMBus."
      },
      {
        "number": "26",
        "name": "PMB_DIO",
        "type": "bidirectional",
        "description": "I2C PMBus digital I/O line; 3.3-V and 1.8-V logic level compatible; used for bidirectional PMBus data transmission and communication protocol."
      },
      {
        "number": "27",
        "name": "VR_FAULT",
        "type": "tri_state",
        "description": "VR fault indicator, open-drain output, active low; asserts for input overcurrent, over-temperature, output overvoltage, and power stage faults; typically pulled up to V3R3 or left floating if not used."
      },
      {
        "number": "28",
        "name": "ADDR-TRISE",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (RADDR-TRISE) to GND sets 3 bits for soft-start slew rate and boot voltage LSB; voltage level sets 4 bits of PMBus address (16 possible)."
      },
      {
        "number": "29",
        "name": "SLEW-MODE",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) to GND selects output voltage change slew rate (0.34 to 2.74 mV/µs); voltage sets 4-bit operation mode bits for DAC mode, phase interleaving, dynamic phase shedding, and zero load-line."
      },
      {
        "number": "30",
        "name": "O-USR",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (RO-USR) to GND selects one of 7 OSR (overshoot reduction) thresholds or OFF; voltage sets one of 7 USR (undershoot reduction) levels or OFF for transient improvement."
      },
      {
        "number": "31",
        "name": "VBOOT",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (RVBOOT) to GND sets bits 3:1 of boot voltage VID; voltage sets bits 7:4, total 7 bits set output voltage at startup from 0.5 V to 2.5 V."
      },
      {
        "number": "32",
        "name": "F-IMAX",
        "type": "input",
        "description": "Voltage divider to VREF pin; resistor (RF-IMAX) to GND sets switching frequency from 300 kHz to 1 MHz; voltage sets maximum operating current (IMAX) with 8-bit A/D where IMAX = (VF-IMAX/VREF) × 256 - 0.5."
      },
      {
        "number": "33",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "34",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "35",
        "name": "PWM4",
        "type": "output",
        "description": "PWM signal output for phase 4; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."
      },
      {
        "number": "36",
        "name": "PWM3",
        "type": "output",
        "description": "PWM signal output for phase 3; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."
      },
      {
        "number": "37",
        "name": "PWM2",
        "type": "output",
        "description": "PWM signal output for phase 2; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."
      },
      {
        "number": "38",
        "name": "PWM1",
        "type": "output",
        "description": "PWM signal output for phase 1; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."
      },
      {
        "number": "39",
        "name": "SKIP-NVM",
        "type": "output",
        "description": "SKIP-NVM output pin; resistor (RSKIP-NVM) to GND sets pinstrap or NVM configuration mode; can connect to FCCM pin of TI power stages for SKIP or FCCM operation mode selection."
      },
      {
        "number": "40",
        "name": "TSEN",
        "type": "input",
        "description": "Temperature sense input; connect to TAO/FAULT pin of TI smart power stages to sense highest die temperature and power stage fault signals; 0°C to 127.9°C measurement range."
      },
      {
        "number": "41",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (exposed pad on bottom of package) listed as GND in datasheet; should be connected to gr",
          "exposed pad 41 added from the footprint"
        ],
        "pages_sent": 123,
        "cost_usd": 0.9959,
        "at": "2026-09-27T14:35:37"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps53647",
        "pages": 123,
        "sha256": "2a0c7fc1d7dab847",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps53647rtar.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          6,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e5b4286c2329085d9ef7f90d5eb5bf41a435241ecc1baaf1383823b6d6a946ae",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps53647rtar-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          6,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "83e9f055f020450fa18916950666006f2ceb57815495a934d64a9d10c2816068",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-40-EP(6x6)",
      "Category": "Power Management (PMIC)",
      "Pins": "41"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps53647rtar"
  ],
  "discovery_pitch": "TPS53647RTAR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps53647rtar.kicad_sym",
    "tps53647rtar.kicad_mod",
    "tps53647rtar.glb",
    "tps53647rtar.step",
    "tps53647rtar.lbr",
    "docs/hero.png",
    "docs/tps53647rtar-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}