main
Ray Publish 0.1.0 8f30de0
{
  "slug": "tps53014dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps53014dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps53014dgsr.kicad_sym",
    "tps53014dgsr.kicad_mod",
    "tps53014dgsr.glb",
    "tps53014dgsr.step",
    "tps53014dgsr.lbr",
    "docs/hero.png",
    "docs/tps53014dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps53014dgsr-hero.glb",
    "tps53014dgsr-hero.overlay.json",
    "tps53014dgsr-etched.glb"
  ],
  "component": {
    "mpn": "TPS53014DGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps53014.pdf",
    "parts": {
      "symbol": "tps53014dgsr.kicad_sym",
      "footprint": "tps53014dgsr.kicad_mod",
      "model_3d": "tps53014dgsr-hero.glb",
      "model_3d_plain": "tps53014dgsr-etched.glb",
      "model_3d_step": "tps53014dgsr-etched.step",
      "model_3d_step_plain": "tps53014dgsr.step",
      "lbr": "tps53014dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2657898",
      "mouser": "595-TPS53014DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:01:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 901 calls left today"
      },
      "mouser": {
        "pn": "595-TPS53014DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VFB",
        "type": "input",
        "description": "D-CAP2 feedback input that connects to the output voltage through a resistor divider, with a 773 mV typical reference at 25°C."
      },
      {
        "number": "2",
        "name": "SS",
        "type": "output",
        "description": "Soft-start programming pin; a capacitor from SS to GND sets the soft-start time, charged by a 6.4-µA source."
      },
      {
        "number": "3",
        "name": "VREG5",
        "type": "output",
        "description": "Output of the 5-V linear regulator that supplies the MOSFET drivers, bypassed to GND with a minimum 4.7-µF high-quality ceramic capacitor and active when EN is high."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input; pull high to enable the converter, with an H-level threshold of 1.6 V and an L-level threshold of 0.5 V."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for the 5-V linear regulator, operating from 4.5 V to 28 V and bypassed to GND with a minimum 0.1-µF high-quality ceramic capacitor."
      },
      {
        "number": "6",
        "name": "PGND",
        "type": "power_in",
        "description": "System (power) ground reference for the drivers and low-side MOSFET, with a recommended operating range of -0.1 V to 0.1 V."
      },
      {
        "number": "7",
        "name": "DRVL",
        "type": "output",
        "description": "PGND-referenced low-side N-channel MOSFET gate driver output that switches between PGND (off) and VREG5 (on); the overcurrent-limit resistor connects between DRVL and PGND, and DRVL is rated -0.1 V to 5.5 V."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "bidirectional",
        "description": "Switch node connection for the high-side driver and the overcurrent comparator, with a recommended range of -1.0 V to 28 V."
      },
      {
        "number": "9",
        "name": "DRVH",
        "type": "output",
        "description": "SW-referenced high-side N-channel MOSFET gate driver output that switches between SW (off) and VBST (on), with DRVH-to-SW recommended at -0.1 V to 5.5 V."
      },
      {
        "number": "10",
        "name": "VBST",
        "type": "input",
        "description": "High-side driver bootstrap voltage input; connect a capacitor from VBST to SW (minimum 0.1 µF), with VBST-to-SW recommended at -0.1 V to 5.5 V and an internal diode from VREG5."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists PGND as I; it is typed power_in here per the KiCad rule that GND pins are power_; The datasheet lists SW as I/O; it is mapped to KiCad bidirectional.; The datasheet lists SS as O (output); it is a capacitor-programming node, so the type follows the da"
        ],
        "pages_sent": 25,
        "cost_usd": 0.0905,
        "at": "2026-11-10T10:01:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps53014.pdf",
        "pages": 25,
        "sha256": "83ecc83df9782a53",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps53014dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps53014dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7e1a185f2b9dad1a1be39dd18deb612c8b3ff837a47fd65c88c966c8cef7d638",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DGS",
      "source_page": 22,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          4.75,
          5.05
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps53014dgsr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}