Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS53014DGSR

Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm

TPS53014DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VFB input D-CAP2 feedback input that connects to the output voltage through a resistor divider, with a 773 mV typical reference at 25°C.
2 SS output Soft-start programming pin; a capacitor from SS to GND sets the soft-start time, charged by a 6.4-µA source.
3 VREG5 output Output of the 5-V linear regulator that supplies the MOSFET drivers, bypassed to GND with a minimum 4.7-µF high-quality ceramic capacitor and active when EN is high.
4 EN input Enable input; pull high to enable the converter, with an H-level threshold of 1.6 V and an L-level threshold of 0.5 V.
5 VIN power_in Supply input for the 5-V linear regulator, operating from 4.5 V to 28 V and bypassed to GND with a minimum 0.1-µF high-quality ceramic capacitor.
6 PGND power_in System (power) ground reference for the drivers and low-side MOSFET, with a recommended operating range of -0.1 V to 0.1 V.
7 DRVL output PGND-referenced low-side N-channel MOSFET gate driver output that switches between PGND (off) and VREG5 (on); the overcurrent-limit resistor connects between DRVL and PGND, and DRVL is rated -0.1 V to 5.5 V.
8 SW bidirectional Switch node connection for the high-side driver and the overcurrent comparator, with a recommended range of -1.0 V to 28 V.
9 DRVH output SW-referenced high-side N-channel MOSFET gate driver output that switches between SW (off) and VBST (on), with DRVH-to-SW recommended at -0.1 V to 5.5 V.
10 VBST input High-side driver bootstrap voltage input; connect a capacitor from VBST to SW (minimum 0.1 µF), with VBST-to-SW recommended at -0.1 V to 5.5 V and an internal diode from VREG5.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Power Management (PMIC)
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VFB threshold voltage VVFBTHL 765.3 773 780.7 mV TA = 25°C, VOUT = 1.05 V 5
VIN shutdown current IVINSDN 6 μA TA = 25°C, No Load, VEN = 0V, VREG5 = OFF 5
VFB temperature coefficient TCVFB -140 140 ppm/°C Relative to TA = 25°C 5
VFB input current IVFB -150 -10 100 nA VFB = 0.8V, TA = 25°C 5
DRVH resistance, source RDRVH 3.2 4.7 Ω Source, IDRVH = -50mA, TA = 25°C 5
DRVH resistance, sink RDRVH 1.4 2.4 Ω Sink, IDRVH = 50mA, TA = 25°C 5
DRVL resistance, source RDRVL 6.9 8.2 Ω Source, IDRVL = -50mA, TA = 25°C 5
DRVL resistance, sink RDRVL 0.8 1.7 Ω Sink, IDRVL = 50mA, TA = 25°C 5
Internal boot diode forward voltage VFBST 0.1 0.2 V VVREG5-VBST, IF = 10mA, TA = 25°C 5
SS charge current Issc -7.36 -6.4 -5.44 μA VSS = 0V, TA = 25°C 5
SS discharge current Issd 4.5 5 mA VSS = 0.5V, TA = 25°C 5
ISSC temperature coefficient TCISSC -4.5 4.5 nA/°C Relative to TA = 25°C 5
EN pin resistance to GND REN 225 450 900 kΩ VEN = 12 V 5
TRIP source current ITRIP 14.3 15 15.8 μA VDRVL = 0.1V, TA = 25°C 5
Current limit threshold (RTRIP = 75kΩ) VOCL 234 336 424 mV RTRIP = 75kΩ, TA = 25°C 5
Current limit threshold (RTRIP = 27kΩ) VOCL 121 174 220 mV RTRIP = 27kΩ, TA = 25°C 5
Current limit threshold (RTRIP = 6.8kΩ) VOCL 35 50 63 mV RTRIP = 6.8kΩ, TA = 25°C 5
Output OVP trip threshold VOVP 115 120 125 % OVP detect voltage 6
Output UVP trip threshold VUVP 63 68 73 % UVP detect voltage 6
Output UVP enable delay (UVP enable delay / soft start time) 1.4 1.7 2 X UVP enable delay / soft start time 6
Input voltage range, VIN and EN -0.3 30 V 4
Input voltage range, VBST -0.3 36 V 4
Input voltage range, VBST - SW -0.3 6 V 4
Input voltage range, VFB -0.3 6 V 4
Input voltage range, SW -0.3 30 V 4
Input voltage range, SW (10 nsec transient) -3 30 V 4
Output voltage range, DRVH -2 36 V 4
Output voltage range, DRVH - SW -0.3 6 V 4
Output voltage range, DRVL, VREG5, SS -0.3 6 V 4
Output voltage range, PGND -0.3 0.3 V 4
TA operating ambient temperature range TA -40 85 °C 4
Storage temperature range TSTG -55 150 °C 4
Junction temperature range TJ -40 150 °C 4
Supply input voltage range VIN 4.5 28 V 4
Input voltage range, VBST VBST -0.1 33.5 V 4
Input voltage range, VBST - SW VBST - SW -0.1 5.5 V 4
Input voltage range, VFB VFB -0.1 5.5 V 4
Input voltage range, EN EN -0.1 28 V 4
Input voltage range, SW SW -1 28 V 4
Output voltage range, DRVH DRVH -1 33.5 V 4
Output voltage range, DRVH - SW DRVH - SW -0.1 5.5 V 4
Output voltage range, DRVL, VREG5, SS DRVL, VREG5, SS -0.1 5.5 V 4
Output voltage range, PGND PGND -0.1 0.1 V 4
TA operating free-air temperature TA -40 85 °C 4
TJ operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance θJA 172.2 °C/W 4
Junction-to-case (top) thermal resistance θJCtop 44 °C/W 4
Junction-to-board thermal resistance θJB 93 °C/W 4
Junction-to-top characterization parameter ψJT 1.6 °C/W 4
Junction-to-board characterization parameter ψJB 91.4 °C/W 4

CAD (KiCad official)

  • Symbol: TPS53014DGSR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: tps53014dgsr-etched.step / tps53014dgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps53014dgsr.step / tps53014dgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 83ecc83df9782a53, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF