Generated by kicad-footprint-generator · KiCad file format 20260206
TPS53014DGSR
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
TPS53014DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VFB | input | D-CAP2 feedback input that connects to the output voltage through a resistor divider, with a 773 mV typical reference at 25°C. |
| 2 | SS | output | Soft-start programming pin; a capacitor from SS to GND sets the soft-start time, charged by a 6.4-µA source. |
| 3 | VREG5 | output | Output of the 5-V linear regulator that supplies the MOSFET drivers, bypassed to GND with a minimum 4.7-µF high-quality ceramic capacitor and active when EN is high. |
| 4 | EN | input | Enable input; pull high to enable the converter, with an H-level threshold of 1.6 V and an L-level threshold of 0.5 V. |
| 5 | VIN | power_in | Supply input for the 5-V linear regulator, operating from 4.5 V to 28 V and bypassed to GND with a minimum 0.1-µF high-quality ceramic capacitor. |
| 6 | PGND | power_in | System (power) ground reference for the drivers and low-side MOSFET, with a recommended operating range of -0.1 V to 0.1 V. |
| 7 | DRVL | output | PGND-referenced low-side N-channel MOSFET gate driver output that switches between PGND (off) and VREG5 (on); the overcurrent-limit resistor connects between DRVL and PGND, and DRVL is rated -0.1 V to 5.5 V. |
| 8 | SW | bidirectional | Switch node connection for the high-side driver and the overcurrent comparator, with a recommended range of -1.0 V to 28 V. |
| 9 | DRVH | output | SW-referenced high-side N-channel MOSFET gate driver output that switches between SW (off) and VBST (on), with DRVH-to-SW recommended at -0.1 V to 5.5 V. |
| 10 | VBST | input | High-side driver bootstrap voltage input; connect a capacitor from VBST to SW (minimum 0.1 µF), with VBST-to-SW recommended at -0.1 V to 5.5 V and an internal diode from VREG5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VFB threshold voltage | VVFBTHL | 765.3 | 773 | 780.7 | mV | TA = 25°C, VOUT = 1.05 V | 5 |
| VIN shutdown current | IVINSDN | 6 | μA | TA = 25°C, No Load, VEN = 0V, VREG5 = OFF | 5 | ||
| VFB temperature coefficient | TCVFB | -140 | 140 | ppm/°C | Relative to TA = 25°C | 5 | |
| VFB input current | IVFB | -150 | -10 | 100 | nA | VFB = 0.8V, TA = 25°C | 5 |
| DRVH resistance, source | RDRVH | 3.2 | 4.7 | Ω | Source, IDRVH = -50mA, TA = 25°C | 5 | |
| DRVH resistance, sink | RDRVH | 1.4 | 2.4 | Ω | Sink, IDRVH = 50mA, TA = 25°C | 5 | |
| DRVL resistance, source | RDRVL | 6.9 | 8.2 | Ω | Source, IDRVL = -50mA, TA = 25°C | 5 | |
| DRVL resistance, sink | RDRVL | 0.8 | 1.7 | Ω | Sink, IDRVL = 50mA, TA = 25°C | 5 | |
| Internal boot diode forward voltage | VFBST | 0.1 | 0.2 | V | VVREG5-VBST, IF = 10mA, TA = 25°C | 5 | |
| SS charge current | Issc | -7.36 | -6.4 | -5.44 | μA | VSS = 0V, TA = 25°C | 5 |
| SS discharge current | Issd | 4.5 | 5 | mA | VSS = 0.5V, TA = 25°C | 5 | |
| ISSC temperature coefficient | TCISSC | -4.5 | 4.5 | nA/°C | Relative to TA = 25°C | 5 | |
| EN pin resistance to GND | REN | 225 | 450 | 900 | kΩ | VEN = 12 V | 5 |
| TRIP source current | ITRIP | 14.3 | 15 | 15.8 | μA | VDRVL = 0.1V, TA = 25°C | 5 |
| Current limit threshold (RTRIP = 75kΩ) | VOCL | 234 | 336 | 424 | mV | RTRIP = 75kΩ, TA = 25°C | 5 |
| Current limit threshold (RTRIP = 27kΩ) | VOCL | 121 | 174 | 220 | mV | RTRIP = 27kΩ, TA = 25°C | 5 |
| Current limit threshold (RTRIP = 6.8kΩ) | VOCL | 35 | 50 | 63 | mV | RTRIP = 6.8kΩ, TA = 25°C | 5 |
| Output OVP trip threshold | VOVP | 115 | 120 | 125 | % | OVP detect voltage | 6 |
| Output UVP trip threshold | VUVP | 63 | 68 | 73 | % | UVP detect voltage | 6 |
| Output UVP enable delay (UVP enable delay / soft start time) | 1.4 | 1.7 | 2 | X | UVP enable delay / soft start time | 6 | |
| Input voltage range, VIN and EN | -0.3 | 30 | V | 4 | |||
| Input voltage range, VBST | -0.3 | 36 | V | 4 | |||
| Input voltage range, VBST - SW | -0.3 | 6 | V | 4 | |||
| Input voltage range, VFB | -0.3 | 6 | V | 4 | |||
| Input voltage range, SW | -0.3 | 30 | V | 4 | |||
| Input voltage range, SW (10 nsec transient) | -3 | 30 | V | 4 | |||
| Output voltage range, DRVH | -2 | 36 | V | 4 | |||
| Output voltage range, DRVH - SW | -0.3 | 6 | V | 4 | |||
| Output voltage range, DRVL, VREG5, SS | -0.3 | 6 | V | 4 | |||
| Output voltage range, PGND | -0.3 | 0.3 | V | 4 | |||
| TA operating ambient temperature range | TA | -40 | 85 | °C | 4 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 4 | ||
| Junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Supply input voltage range | VIN | 4.5 | 28 | V | 4 | ||
| Input voltage range, VBST | VBST | -0.1 | 33.5 | V | 4 | ||
| Input voltage range, VBST - SW | VBST - SW | -0.1 | 5.5 | V | 4 | ||
| Input voltage range, VFB | VFB | -0.1 | 5.5 | V | 4 | ||
| Input voltage range, EN | EN | -0.1 | 28 | V | 4 | ||
| Input voltage range, SW | SW | -1 | 28 | V | 4 | ||
| Output voltage range, DRVH | DRVH | -1 | 33.5 | V | 4 | ||
| Output voltage range, DRVH - SW | DRVH - SW | -0.1 | 5.5 | V | 4 | ||
| Output voltage range, DRVL, VREG5, SS | DRVL, VREG5, SS | -0.1 | 5.5 | V | 4 | ||
| Output voltage range, PGND | PGND | -0.1 | 0.1 | V | 4 | ||
| TA operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| TJ operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | θJA | 172.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | θJCtop | 44 | °C/W | 4 | |||
| Junction-to-board thermal resistance | θJB | 93 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 1.6 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 91.4 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS53014DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps53014dgsr-etched.step/tps53014dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps53014dgsr.step/tps53014dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
83ecc83df9782a53, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).