main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps51650rslr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps51650rslr-etched.glb Publish 0.1.0 · Ray
tps51650rslr-etched.step tps51650rslr: factory component page (tier=lcsc) · Ray
tps51650rslr-hero.glb tps51650rslr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps51650rslr-hero.overlay.json Publish 0.1.0 · Ray
tps51650rslr.glb Publish 0.1.0 · Ray
tps51650rslr.kicad_mod Publish 0.1.0 · Ray
tps51650rslr.kicad_sym Publish 0.1.0 · Ray
tps51650rslr.lbr Publish 0.1.0 · Ray
tps51650rslr.step Publish 0.1.0 · Ray

TPS51650RSLR

Texas Instruments · DC-DC Converters · VQFN-48-EP(6x6)

TPS51650RSLR from Texas Instruments, in a VQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CTHERM bidirectional Thermal sensor connection for the CPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND.
2 COCP-R input A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the CPU converter, and the pin voltage sets 1 of 8 USR/OSR levels.
3 CF-IMAX input Voltage divider to VREF; a resistor to GND sets the CPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up.
4 CCSP1 input Positive current sense input for CPU phase 1; tie to V3R3 to run the GPU converter only.
5 CCSN1 input Negative current sense input for CPU phase 1 with a secondary OVP comparator; connect to the most negative node of the sense resistor or inductor DCR network.
6 CCSN2 input Negative current sense input for CPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network.
7 CCSP2 input Positive current sense input for CPU phase 2; tie to V3R3 to disable the phase.
8 CCSP3 input Positive current sense input for CPU phase 3; tie to V3R3 to disable the phase.
9 CCSN3 input Negative current sense input for CPU phase 3; connect to the most negative node of the sense resistor or inductor DCR network.
10 CCOMP output Output of the GM error amplifier for the CPU converter; a resistor to VREF sets the droop gain.
11 CVFB input Voltage sense line tied directly to VCORE of the CPU converter (soft-stop transistor is on this pin); tie to VCORE with a 10-Ω resistor to close feedback when the µP is not in the socket.
12 CGFB input Voltage sense return for the CPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket.
13 GOCP-R input A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the GPU converter, and the pin voltage sets 1 of 8 USR/OSR levels.
14 VREF power_in 1.7-V, 500-µA reference; bypass to GND with a 0.22-µF ceramic capacitor.
15 V3R3 power_in 3.3-V power input; bypass to GND with ≥1 µF ceramic capacitor.
16 VR_ON input IMVP-7 VR enable with 1-V I/O level and 100-ns de-bounce; the regulator enters controlled soft-stop when brought low.
17 CPGOOD output Open-drain IMVP-7_PWRGD output for the CPU converter.
18 VCLK input SVID clock input with 1-V logic level.
19 ALERT output Open-drain SVID interrupt line; route between VCLK and VDIO to prevent cross-talk.
20 VDIO bidirectional SVID digital I/O line with 1-V logic level.
21 VR_HOT output IMVP-7 thermal flag, open-drain active low, typically pulled up to 1-V logic through 56 Ω; fall time <100 ns with 1-ms de-glitch.
22 SLEWA input Start-up voltage sets 1 of 7 slew rates for both converters (latched; soft-start/soft-stop are SLEWRATE/8); on TPS59650 the resistor to GND sets the base SVID address.
23 GPGOOD output Open-drain IMVP-7_PWRGD output for the GPU converter.
24 GF-IMAX input Voltage divider to VREF; a resistor to GND sets the GPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up.
25 GGFB input Voltage sense return for the GPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket.
26 GVFB input Voltage sense line tied directly to VGFX of the GPU converter (soft-stop transistor is on this pin); tie to VGFX with a 10-Ω resistor when the microprocessor is not in the socket.
27 GCOMP output Output of the gM error amplifier for the GPU converter; a resistor to VREF sets the droop gain.
28 GCSN1 input Negative current sense input for GPU phase 1; connect to the most negative node of the sense resistor or inductor DCR network.
29 GCSP1 input Positive current sense input for GPU phase 1; tie GCSP1 and GCSP2 to V3R3 to disable the GPU converter completely.
30 GCSP2 input Positive current sense input for GPU phase 2; tie to V3R3 to disable the phase.
31 GCSN2 input Negative current sense input for GPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network.
32 GTHERM bidirectional Thermal sensor input for the GPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND.
33 GSKIP output Skip mode control of the external GPU driver, 5-V logic (HI = FCCM, LO = SKIP); a defined start-up voltage level can turn OSR OFF or USR OFF.
34 GPWM1 output PWM control for the external driver of GPU phase 1, 5-V logic level.
35 GPWM2 output PWM control for the external driver of GPU phase 2, 5-V logic level.
36 CPWM3 output PWM control for the external driver of CPU phase 3, 5-V logic level.
37 VBAT power_in Provides VBAT information to the on-time circuits for both converters; a 10-kΩ series resistor protects against solder bridges or mis-probing.
38 CDH2 output Top N-channel FET gate drive output for CPU phase 2.
39 CBST2 input Top N-channel FET bootstrap voltage input for CPU phase 2.
40 CSW2 passive Top N-channel FET gate drive return for CPU phase 2.
41 CDL2 output Synchronous N-channel FET gate drive output for CPU phase 2.
42 PGND power_in Synchronous N-channel FET gate drive return; connect directly to the gate driver decoupling capacitor ground, not to the thermal pad.
43 V5DRV power_in Power input for the gate drivers, connected with an external resistor to V5; decouple with a ≥2.2 µF ceramic capacitor.
44 CDL1 output Synchronous N-channel FET gate drive output for CPU phase 1.
45 CSW1 passive Top N-channel FET gate drive return for CPU phase 1.
46 CBST1 input Top N-channel FET bootstrap voltage input for CPU phase 1.
47 CDH1 output Top N-channel FET gate drive output for CPU phase 1.
48 V5 power_in 5-V power input for analog circuits; connect through a resistor to the 5-V plane and bypass to GND with ≥1 µF ceramic capacitor.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(6x6)
Category Power Supply Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating junction temperature TJ -40 125 °C 2
Storage temperature Tstg -55 150 °C 2
VBAT input voltage abs max VBAT -0.3 32 V 2
CSW1, CSW2 abs max CSW -6 32 V 2
V5DRV, V5 abs max V5 -0.3 6 V 2
V3R3 abs max V3R3 -0.3 3.6 V 2
VREF abs max VREF -0.3 1.8 V 2
ESD HBM 2 kV HBM QSS 009-105 (JESD22-A114A) 2
ESD CDM 500 V CDM QSS 009-147 (JESD22-C101B.01) 2
Junction-to-ambient thermal resistance θJA 31.7 °C/W RSL 48 pins 2
Junction-to-case (top) thermal resistance θJCtop 19.8 °C/W RSL 48 pins 2
Junction-to-board thermal resistance θJB 7.1 °C/W RSL 48 pins 2
Junction-to-case (bottom) thermal resistance θJCbot 2.1 °C/W RSL 48 pins 2
VBAT input voltage VBAT -0.1 28 V 3
V5DRV, V5 input voltage V5 4.5 5.5 V 3
V3R3 input voltage V3R3 3.1 3.5 V 3
Operating free air temperature TA -10 105 °C TPS51650 3
V5 supply current, CPU 3-phase, GPU 2-phase active IV5-5 7.5 11 mA IV5+IV5DRV, VVDAC < VxVFB < VVDAC+100 mV, VR_ON = HI 4
V5 supply current, GPU off IV5-3 5.5 mA VR_ON = HI, VGCSP2 = 3.3 V 4
V5 supply current PS3 IV5-PS3 5.5 mA VR_ON = HI, SetPS = PS3 4
V5DRV standby current IV5STBY 10 20 µA VR_ON = LO, IV5 + IV5DRV 4
V5 UVLO OK threshold VUVLOH 4.25 4.35 4.5 V Ramp up, VR_ON=HI 4
V5 UVLO fault threshold VUVLOL 3.95 4.1 4.3 V Ramp down, VR_ON=HI 4
V5 POR fault latch VPORV5 1.2 1.9 2.5 V Specified by design 4
V3R3 supply current IV3R3 0.5 1 mA SVID bus idle, VR_ON = HI 4
V3R3 standby current IV3R3SBY 10 µA VR_ON = LO 4
V3R3 UVLO OK threshold V3UVLOH 2.5 2.9 3 V Ramp up, VR_ON=HI 4
V3R3 UVLO fault threshold V3UVLOL 2.4 2.7 2.8 V Ramp down, VR_ON=HI 4
V3R3 POR fault latch VPORV3R3 1.2 1.9 2.5 V Specified by design 4
xVFB tolerance 0.25-0.595 V VDAC1 -6 6 mV 0.25 ≤ VxVFB ≤ 0.595V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C 4
xVFB tolerance 0.6-0.995 V VDAC1 -5 5 mV 0.6 ≤ VxVFB ≤ 0.995V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C 4
xVFB tolerance 1.000-1.520 V VDAC2 -0.5 0.5 % 1.000V ≤ VxVFB ≤ 1.520 V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C 4
VREF output VVREF 1.655 1.7 1.745 V 4.5 V ≤ VV5 ≤ 5.5 V, IVREF = 0 A 4
VREF output source VVREFSRC -4 -0.1 mV 0 µA ≤ IVREF ≤ 500 µA 4
VREF output sink VVREFSNK 0.1 4 mV -500 µA ≤ IVREF ≤ 0 µA 4
xVFB input bias current IxVFB 20 40 µA VxVFB= 2 V, VxGFB= 0 V 4
xGFB input bias current IxGFB -40 -20 µA VxVFB= 2 V, VxGFB= 0 V 4
OCP voltage RxOCP-R = 20 kΩ VOCPP 4.6 7 9.2 mV RxOCP-R = 20 kΩ, TPS51650 5
OCP voltage RxOCP-R = 24 kΩ VOCPP 7.6 10 12.1 mV RxOCP-R = 24 kΩ, TPS51650 5
OCP voltage RxOCP-R = 30 kΩ VOCPP 11.6 14 16.2 mV RxOCP-R = 30 kΩ, TPS51650 5
OCP voltage RxOCP-R = 39 kΩ VOCPP 16.5 19 21.2 mV RxOCP-R = 39 kΩ, TPS51650 5
OCP voltage RxOCP-R = 56 kΩ VOCPP 22.3 25 27.2 mV RxOCP-R = 56 kΩ, TPS51650 5
OCP voltage RxOCP-R = 75 kΩ VOCPP 29.2 32 34.5 mV RxOCP-R = 75 kΩ, TPS51650 5
OCP voltage RxOCP-R = 100 kΩ VOCPP 37.1 40 42.5 mV RxOCP-R = 100 kΩ, TPS51650 5
OCP voltage RxOCP-R = 150 kΩ VOCPP 46.1 49 51.9 mV RxOCP-R = 150 kΩ, TPS51650 5
CS pin input bias current ICS -1 0.2 1 µA CSPx and CSNx 5
xVFB discharge input bias current IxVFBDQ 90 125 180 µA End of soft-stop, xVFB = 100 mV 5
Droop amplifier transconductance GM-DROOP 486 497 518 µS xVFB = 1 V, TPS51650 5
Internal current share tolerance IBAL_TOL -3 3 % (VCSP1-VCSN1) = (VCSP2-VCSN2) = (VCSP3-VCSN3) = VOCPP_MIN 5
Internal current sense gain ACSINT 11.65 12 12.3 V/V Gain from CSPx, CSNx to PWM comparator 5
Start-up time tSTARTUP1 5 ms VBOOT > 0 V, SLEWRATE = 12 mV/µs, no faults, VR_ON to controller responding 6
xVFB slew soft-start / soft-stop SLSTRTSTP 1.25 1.5 1.75 mV/µs SLEWRATE = 12mV/µs 6
Slew rate setting VSLEWA ≤ 0.30 V SLSET 10 12 14.5 mV/µs VSLEWA ≤ 0.30V 6
Slew rate setting VSLEWA = 0.4 V SLSET 3 4 5 mV/µs VSLEWA = 0.4 V 6
Slew rate setting VSLEWA = 0.6 V SLSET 7 8 10 mV/µs VSLEWA = 0.6 V 6
Slew rate setting 0.75-0.85 V SLSET 10 12 14.5 mV/µs 0.75 V ≤ VSLEWA ≤ 0.85 V 6
xPGOOD deglitch time (over) tPGDDGLTO 5 15 µs Time from xVFB out of +220 mV VDAC boundary to xPGOOD low 6
xPGOOD deglitch time (under) tPGDDGLTU 50 100 µs Time from xVFB out of -315 mV VDAC boundary to xPGOOD low 6
CPU on-time 20 kΩ tTON_CPU 300 317 340 ns CF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (250 kHz) 6
CPU on-time 24 kΩ tTON_CPU 245 261 284 ns CF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (300 kHz) 6
CPU on-time 30 kΩ tTON_CPU 210 223 242 ns CF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (350 kHz) 6
CPU on-time 39 kΩ tTON_CPU 184 196 216 ns CF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (400 kHz) 6
CPU on-time 56 kΩ tTON_CPU 169 181 201 ns CF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (450 kHz) 6
CPU on-time 75 kΩ tTON_CPU 153 164 184 ns CF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (500 kHz) 6
CPU on-time 100 kΩ tTON_CPU 140 151 171 ns CF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) 6
CPU on-time 150 kΩ tTON_CPU 130 140 160 ns CF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (600 kHz) 6
GPU on-time 20 kΩ tTON_GPU 282 323 377 ns GF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (275 kHz) 7
GPU on-time 24 kΩ tTON_GPU 233 270 319 ns GF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (330 kHz) 7
GPU on-time 30 kΩ tTON_GPU 208 236 280 ns GF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (385 kHz) 7
GPU on-time 39 kΩ tTON_GPU 185 210 248 ns GF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (440 kHz) 7
GPU on-time 56 kΩ tTON_GPU 172 195 230 ns GF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (495 kHz) 7
GPU on-time 75 kΩ tTON_GPU 158 178 211 ns GF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) 7
GPU on-time 100 kΩ tTON_GPU 147 166 203 ns GF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (605 kHz) 7
GPU on-time 150 kΩ tTON_GPU 141 157 193 ns GF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (660 kHz) 7
Controller minimum off time tMIN 150 225 ns Fixed value 7
VID change to xVFB change tVCCVID 2 µs ACK of SetVID-x to start of voltage ramp; specified by design 7
VR_ON low to xPGOOD low tVRONPGD 60 100 ns 7
VR_HOT deglitch time tVRTDGLT 0.2 0.5 ms 7
Soft-stop transistor resistance RSFTSTP 500 740 1100 Ω Connect to CVFB, GVFB 7
Fixed OVP voltage threshold VOVPH 1.67 1.72 1.77 V VCSN1 or VGCSN > VOVPH for 1 µs, DRVL → ON 7
xPGOOD high threshold VPGDH 190 220 245 mV Measured at xVFB pin wrt VID code, device latches OFF 7
xPGOOD low threshold VPGDL -348 -315 -278 mV Measured at xVFB pin wrt VID code, device latches OFF 7
THERM bit0 voltage VTHERM 755 783 810 mV bit0 of xTHERM register = high 7
THERM bit1 voltage VTHERM 657 680 707 mV bit1 of xTHERM register also is high 7
THERM bit2 voltage VTHERM 611 638 665 mV bit2 of xTHERM register also is high 7
THERM bit3 voltage VTHERM 569 598 624 mV bit3 of xTHERM register also is high 7
THERM bit4 voltage VTHERM 532 559 585 mV bit4 of xTHERM register also is high 7
THERM bit5 voltage VTHERM 498 523 549 mV bit5 of xTHERM register also is high 7
THERM bit6 voltage VTHERM 462 455 514 mV bit6 of xTHERM register also is high, ALERT goes low 7
THERM bit7 voltage VTHERM 430 455 481 mV bit7 of xTHERM register also is high, VR_HOT goes low 7
CDLx/CDHx low THERM voltage VTHERM 373 410 428 mV CDLx goes low, CDHx goes low 7
THERM current ITHRM -2 2 µA Leakage current, VxTHERM = 1 V 7
Internal controller thermal shutdown THINT 155 °C Latch off controller; specified by design 7
Thermal shutdown hysteresis THHYS 20 °C Cooling required before converter can be reset; specified by design 7
VDIO/ALERT/VR_HOT open drain pull-down resistance RRSVIDL 4 8 13 Ω at 0.31 V 8
xPGOOD pull-down resistance RRPGDL 36 50 Ω at 0.31 V 8
Open drain leakage current IVRTTLK -2 0.2 2 µA Hi-Z leakage, apply 3.3-V in off state 8
Input logic low VIL 0.45 V VCLK, VDIO 8
Input logic high VIH 0.65 V VCLK, VDIO 8
VR_ON logic low VVR_ONL 0.3 V 8
VR_ON logic high VVR_ONH 0.8 V 8
I/O 3.3 V leakage IVR_ONH 8 25 µA VVR_ON = 1.1 V 8
DRVH on-resistance HI RDRVH 1.2 2.5 Ω (VCBSTx, VCSWx) = 5 V, HI state 9
DRVH on-resistance LO RDRVH 0.8 2.5 Ω (VCBSTx, VCSWx) = 5 V, LO state 9
DRVH transition time tDRVH 15 40 ns CDHx 10% to 90% or 90% to 10%, CCDHx = 3 nF 9
DRVL on resistance HI RDRVL 0.9 2 Ω HI state, (VV5DRV, VVDRVL) = 0.25 V 9
DRVL on resistance LO RDRVL 0.4 1 Ω LO state, (VVDRVL, VPGND)= 0.2 V 9
DRVL transition time tDRVL 15 40 ns CCDLx = 3 nF 9
Driver non overlap time tNONOVLP 8 25 ns VCSWx falls to 1 V to VCDLx rises to 1 V 9
BST on-resistance RDS(on) 5 10 22 Ω (VV5DRV, VVBST), IF = 5 mA 9
BST switch leakage current IBSTLK 0.1 1 µA VVBST = 34 V, VCSWx= 28 V 9
xPWMy output low level VPWML 0.3 V 9
xPWMy output high level VPWMH 4.2 V 9
xPWM leakage VPW(leak) 0.1 µA Tri-state, VxPWMx = 5 V 9

CAD (KiCad official)

  • Symbol: TPS51650RSLR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
  • 3D model: VQFN-48-EP(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps51650rslr-etched.step / tps51650rslr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps51650rslr.step / tps51650rslr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 d8b71e3a95647d43, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF