main
Ray
Publish 0.1.0
46fbab9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438
{
"slug": "tps51650rslr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, VQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"tps51650rslr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps51650rslr.kicad_sym",
"tps51650rslr.kicad_mod",
"tps51650rslr.glb",
"tps51650rslr.step",
"tps51650rslr.lbr",
"docs/hero.png",
"docs/tps51650rslr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps51650rslr-hero.glb",
"tps51650rslr-hero.overlay.json",
"tps51650rslr-etched.glb"
],
"component": {
"mpn": "TPS51650RSLR",
"manufacturer": "Texas Instruments",
"package": "VQFN-48-EP(6x6)",
"pin_count": 49,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps51650",
"parts": {
"symbol": "tps51650rslr.kicad_sym",
"footprint": "tps51650rslr.kicad_mod",
"model_3d": "tps51650rslr-hero.glb",
"model_3d_plain": "tps51650rslr-etched.glb",
"model_3d_step": "tps51650rslr-etched.step",
"model_3d_step_plain": "tps51650rslr.step",
"lbr": "tps51650rslr.lbr"
},
"distributor_links": {
"lcsc": "C702263"
},
"distributor_check": {
"checked_at": "2026-10-27T07:33:23Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "CTHERM",
"type": "bidirectional",
"description": "Thermal sensor connection for the CPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND."
},
{
"number": "2",
"name": "COCP-R",
"type": "input",
"description": "A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the CPU converter, and the pin voltage sets 1 of 8 USR/OSR levels."
},
{
"number": "3",
"name": "CF-IMAX",
"type": "input",
"description": "Voltage divider to VREF; a resistor to GND sets the CPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up."
},
{
"number": "4",
"name": "CCSP1",
"type": "input",
"description": "Positive current sense input for CPU phase 1; tie to V3R3 to run the GPU converter only."
},
{
"number": "5",
"name": "CCSN1",
"type": "input",
"description": "Negative current sense input for CPU phase 1 with a secondary OVP comparator; connect to the most negative node of the sense resistor or inductor DCR network."
},
{
"number": "6",
"name": "CCSN2",
"type": "input",
"description": "Negative current sense input for CPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network."
},
{
"number": "7",
"name": "CCSP2",
"type": "input",
"description": "Positive current sense input for CPU phase 2; tie to V3R3 to disable the phase."
},
{
"number": "8",
"name": "CCSP3",
"type": "input",
"description": "Positive current sense input for CPU phase 3; tie to V3R3 to disable the phase."
},
{
"number": "9",
"name": "CCSN3",
"type": "input",
"description": "Negative current sense input for CPU phase 3; connect to the most negative node of the sense resistor or inductor DCR network."
},
{
"number": "10",
"name": "CCOMP",
"type": "output",
"description": "Output of the GM error amplifier for the CPU converter; a resistor to VREF sets the droop gain."
},
{
"number": "11",
"name": "CVFB",
"type": "input",
"description": "Voltage sense line tied directly to VCORE of the CPU converter (soft-stop transistor is on this pin); tie to VCORE with a 10-Ω resistor to close feedback when the µP is not in the socket."
},
{
"number": "12",
"name": "CGFB",
"type": "input",
"description": "Voltage sense return for the CPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket."
},
{
"number": "13",
"name": "GOCP-R",
"type": "input",
"description": "A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the GPU converter, and the pin voltage sets 1 of 8 USR/OSR levels."
},
{
"number": "14",
"name": "VREF",
"type": "power_in",
"description": "1.7-V, 500-µA reference; bypass to GND with a 0.22-µF ceramic capacitor."
},
{
"number": "15",
"name": "V3R3",
"type": "power_in",
"description": "3.3-V power input; bypass to GND with ≥1 µF ceramic capacitor."
},
{
"number": "16",
"name": "VR_ON",
"type": "input",
"description": "IMVP-7 VR enable with 1-V I/O level and 100-ns de-bounce; the regulator enters controlled soft-stop when brought low."
},
{
"number": "17",
"name": "CPGOOD",
"type": "output",
"description": "Open-drain IMVP-7_PWRGD output for the CPU converter."
},
{
"number": "18",
"name": "VCLK",
"type": "input",
"description": "SVID clock input with 1-V logic level."
},
{
"number": "19",
"name": "ALERT",
"type": "output",
"description": "Open-drain SVID interrupt line; route between VCLK and VDIO to prevent cross-talk."
},
{
"number": "20",
"name": "VDIO",
"type": "bidirectional",
"description": "SVID digital I/O line with 1-V logic level."
},
{
"number": "21",
"name": "VR_HOT",
"type": "output",
"description": "IMVP-7 thermal flag, open-drain active low, typically pulled up to 1-V logic through 56 Ω; fall time <100 ns with 1-ms de-glitch."
},
{
"number": "22",
"name": "SLEWA",
"type": "input",
"description": "Start-up voltage sets 1 of 7 slew rates for both converters (latched; soft-start/soft-stop are SLEWRATE/8); on TPS59650 the resistor to GND sets the base SVID address."
},
{
"number": "23",
"name": "GPGOOD",
"type": "output",
"description": "Open-drain IMVP-7_PWRGD output for the GPU converter."
},
{
"number": "24",
"name": "GF-IMAX",
"type": "input",
"description": "Voltage divider to VREF; a resistor to GND sets the GPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up."
},
{
"number": "25",
"name": "GGFB",
"type": "input",
"description": "Voltage sense return for the GPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket."
},
{
"number": "26",
"name": "GVFB",
"type": "input",
"description": "Voltage sense line tied directly to VGFX of the GPU converter (soft-stop transistor is on this pin); tie to VGFX with a 10-Ω resistor when the microprocessor is not in the socket."
},
{
"number": "27",
"name": "GCOMP",
"type": "output",
"description": "Output of the gM error amplifier for the GPU converter; a resistor to VREF sets the droop gain."
},
{
"number": "28",
"name": "GCSN1",
"type": "input",
"description": "Negative current sense input for GPU phase 1; connect to the most negative node of the sense resistor or inductor DCR network."
},
{
"number": "29",
"name": "GCSP1",
"type": "input",
"description": "Positive current sense input for GPU phase 1; tie GCSP1 and GCSP2 to V3R3 to disable the GPU converter completely."
},
{
"number": "30",
"name": "GCSP2",
"type": "input",
"description": "Positive current sense input for GPU phase 2; tie to V3R3 to disable the phase."
},
{
"number": "31",
"name": "GCSN2",
"type": "input",
"description": "Negative current sense input for GPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network."
},
{
"number": "32",
"name": "GTHERM",
"type": "bidirectional",
"description": "Thermal sensor input for the GPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND."
},
{
"number": "33",
"name": "GSKIP",
"type": "output",
"description": "Skip mode control of the external GPU driver, 5-V logic (HI = FCCM, LO = SKIP); a defined start-up voltage level can turn OSR OFF or USR OFF."
},
{
"number": "34",
"name": "GPWM1",
"type": "output",
"description": "PWM control for the external driver of GPU phase 1, 5-V logic level."
},
{
"number": "35",
"name": "GPWM2",
"type": "output",
"description": "PWM control for the external driver of GPU phase 2, 5-V logic level."
},
{
"number": "36",
"name": "CPWM3",
"type": "output",
"description": "PWM control for the external driver of CPU phase 3, 5-V logic level."
},
{
"number": "37",
"name": "VBAT",
"type": "power_in",
"description": "Provides VBAT information to the on-time circuits for both converters; a 10-kΩ series resistor protects against solder bridges or mis-probing."
},
{
"number": "38",
"name": "CDH2",
"type": "output",
"description": "Top N-channel FET gate drive output for CPU phase 2."
},
{
"number": "39",
"name": "CBST2",
"type": "input",
"description": "Top N-channel FET bootstrap voltage input for CPU phase 2."
},
{
"number": "40",
"name": "CSW2",
"type": "passive",
"description": "Top N-channel FET gate drive return for CPU phase 2."
},
{
"number": "41",
"name": "CDL2",
"type": "output",
"description": "Synchronous N-channel FET gate drive output for CPU phase 2."
},
{
"number": "42",
"name": "PGND",
"type": "power_in",
"description": "Synchronous N-channel FET gate drive return; connect directly to the gate driver decoupling capacitor ground, not to the thermal pad."
},
{
"number": "43",
"name": "V5DRV",
"type": "power_in",
"description": "Power input for the gate drivers, connected with an external resistor to V5; decouple with a ≥2.2 µF ceramic capacitor."
},
{
"number": "44",
"name": "CDL1",
"type": "output",
"description": "Synchronous N-channel FET gate drive output for CPU phase 1."
},
{
"number": "45",
"name": "CSW1",
"type": "passive",
"description": "Top N-channel FET gate drive return for CPU phase 1."
},
{
"number": "46",
"name": "CBST1",
"type": "input",
"description": "Top N-channel FET bootstrap voltage input for CPU phase 1."
},
{
"number": "47",
"name": "CDH1",
"type": "output",
"description": "Top N-channel FET gate drive output for CPU phase 1."
},
{
"number": "48",
"name": "V5",
"type": "power_in",
"description": "5-V power input for analog circuits; connect through a resistor to the 5-V plane and bypass to GND with ≥1 µF ceramic capacitor."
},
{
"number": "49",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The thermal pad has no pin number or name in the pin table. I labeled it 'EP' / 'GND' based on the g; The datasheet gives no I/O type for the CSW1 and CSW2 gate-drive return pins beyond 'I/O'. I classed; The pin numbers were taken from the pin function table. The top-view diagram text was garbled, so I "
],
"pages_sent": 9,
"cost_usd": 0.1766,
"at": "2026-10-27T07:32:48"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps51650",
"pages": 50,
"sha256": "d8b71e3a95647d43",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 49,
"described": 49,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps51650rslr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.02,
6.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7d35885aa864bbdd8bd8e906af82292fc4c906948696a9bba71b871655b2e607",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps51650rslr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.02,
6.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "bb6917cdc312fd00856757aa6dc5d85a48a4784834e3f557b4a84d0be02d8d45",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}