main
Ray
Publish 0.1.0
46fbab9
TPS51650RSLR
Texas Instruments · DC-DC Converters · VQFN-48-EP(6x6)
TPS51650RSLR from Texas Instruments, in a VQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTHERM | bidirectional | Thermal sensor connection for the CPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND. |
| 2 | COCP-R | input | A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the CPU converter, and the pin voltage sets 1 of 8 USR/OSR levels. |
| 3 | CF-IMAX | input | Voltage divider to VREF; a resistor to GND sets the CPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up. |
| 4 | CCSP1 | input | Positive current sense input for CPU phase 1; tie to V3R3 to run the GPU converter only. |
| 5 | CCSN1 | input | Negative current sense input for CPU phase 1 with a secondary OVP comparator; connect to the most negative node of the sense resistor or inductor DCR network. |
| 6 | CCSN2 | input | Negative current sense input for CPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network. |
| 7 | CCSP2 | input | Positive current sense input for CPU phase 2; tie to V3R3 to disable the phase. |
| 8 | CCSP3 | input | Positive current sense input for CPU phase 3; tie to V3R3 to disable the phase. |
| 9 | CCSN3 | input | Negative current sense input for CPU phase 3; connect to the most negative node of the sense resistor or inductor DCR network. |
| 10 | CCOMP | output | Output of the GM error amplifier for the CPU converter; a resistor to VREF sets the droop gain. |
| 11 | CVFB | input | Voltage sense line tied directly to VCORE of the CPU converter (soft-stop transistor is on this pin); tie to VCORE with a 10-Ω resistor to close feedback when the µP is not in the socket. |
| 12 | CGFB | input | Voltage sense return for the CPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket. |
| 13 | GOCP-R | input | A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the GPU converter, and the pin voltage sets 1 of 8 USR/OSR levels. |
| 14 | VREF | power_in | 1.7-V, 500-µA reference; bypass to GND with a 0.22-µF ceramic capacitor. |
| 15 | V3R3 | power_in | 3.3-V power input; bypass to GND with ≥1 µF ceramic capacitor. |
| 16 | VR_ON | input | IMVP-7 VR enable with 1-V I/O level and 100-ns de-bounce; the regulator enters controlled soft-stop when brought low. |
| 17 | CPGOOD | output | Open-drain IMVP-7_PWRGD output for the CPU converter. |
| 18 | VCLK | input | SVID clock input with 1-V logic level. |
| 19 | ALERT | output | Open-drain SVID interrupt line; route between VCLK and VDIO to prevent cross-talk. |
| 20 | VDIO | bidirectional | SVID digital I/O line with 1-V logic level. |
| 21 | VR_HOT | output | IMVP-7 thermal flag, open-drain active low, typically pulled up to 1-V logic through 56 Ω; fall time <100 ns with 1-ms de-glitch. |
| 22 | SLEWA | input | Start-up voltage sets 1 of 7 slew rates for both converters (latched; soft-start/soft-stop are SLEWRATE/8); on TPS59650 the resistor to GND sets the base SVID address. |
| 23 | GPGOOD | output | Open-drain IMVP-7_PWRGD output for the GPU converter. |
| 24 | GF-IMAX | input | Voltage divider to VREF; a resistor to GND sets the GPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up. |
| 25 | GGFB | input | Voltage sense return for the GPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket. |
| 26 | GVFB | input | Voltage sense line tied directly to VGFX of the GPU converter (soft-stop transistor is on this pin); tie to VGFX with a 10-Ω resistor when the microprocessor is not in the socket. |
| 27 | GCOMP | output | Output of the gM error amplifier for the GPU converter; a resistor to VREF sets the droop gain. |
| 28 | GCSN1 | input | Negative current sense input for GPU phase 1; connect to the most negative node of the sense resistor or inductor DCR network. |
| 29 | GCSP1 | input | Positive current sense input for GPU phase 1; tie GCSP1 and GCSP2 to V3R3 to disable the GPU converter completely. |
| 30 | GCSP2 | input | Positive current sense input for GPU phase 2; tie to V3R3 to disable the phase. |
| 31 | GCSN2 | input | Negative current sense input for GPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network. |
| 32 | GTHERM | bidirectional | Thermal sensor input for the GPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND. |
| 33 | GSKIP | output | Skip mode control of the external GPU driver, 5-V logic (HI = FCCM, LO = SKIP); a defined start-up voltage level can turn OSR OFF or USR OFF. |
| 34 | GPWM1 | output | PWM control for the external driver of GPU phase 1, 5-V logic level. |
| 35 | GPWM2 | output | PWM control for the external driver of GPU phase 2, 5-V logic level. |
| 36 | CPWM3 | output | PWM control for the external driver of CPU phase 3, 5-V logic level. |
| 37 | VBAT | power_in | Provides VBAT information to the on-time circuits for both converters; a 10-kΩ series resistor protects against solder bridges or mis-probing. |
| 38 | CDH2 | output | Top N-channel FET gate drive output for CPU phase 2. |
| 39 | CBST2 | input | Top N-channel FET bootstrap voltage input for CPU phase 2. |
| 40 | CSW2 | passive | Top N-channel FET gate drive return for CPU phase 2. |
| 41 | CDL2 | output | Synchronous N-channel FET gate drive output for CPU phase 2. |
| 42 | PGND | power_in | Synchronous N-channel FET gate drive return; connect directly to the gate driver decoupling capacitor ground, not to the thermal pad. |
| 43 | V5DRV | power_in | Power input for the gate drivers, connected with an external resistor to V5; decouple with a ≥2.2 µF ceramic capacitor. |
| 44 | CDL1 | output | Synchronous N-channel FET gate drive output for CPU phase 1. |
| 45 | CSW1 | passive | Top N-channel FET gate drive return for CPU phase 1. |
| 46 | CBST1 | input | Top N-channel FET bootstrap voltage input for CPU phase 1. |
| 47 | CDH1 | output | Top N-channel FET gate drive output for CPU phase 1. |
| 48 | V5 | power_in | 5-V power input for analog circuits; connect through a resistor to the 5-V plane and bypass to GND with ≥1 µF ceramic capacitor. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-48-EP(6x6) |
| Category | Power Supply Chip |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating junction temperature | TJ | -40 | 125 | °C | 2 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 2 | ||
| VBAT input voltage abs max | VBAT | -0.3 | 32 | V | 2 | ||
| CSW1, CSW2 abs max | CSW | -6 | 32 | V | 2 | ||
| V5DRV, V5 abs max | V5 | -0.3 | 6 | V | 2 | ||
| V3R3 abs max | V3R3 | -0.3 | 3.6 | V | 2 | ||
| VREF abs max | VREF | -0.3 | 1.8 | V | 2 | ||
| ESD HBM | 2 | kV | HBM QSS 009-105 (JESD22-A114A) | 2 | |||
| ESD CDM | 500 | V | CDM QSS 009-147 (JESD22-C101B.01) | 2 | |||
| Junction-to-ambient thermal resistance | θJA | 31.7 | °C/W | RSL 48 pins | 2 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 19.8 | °C/W | RSL 48 pins | 2 | ||
| Junction-to-board thermal resistance | θJB | 7.1 | °C/W | RSL 48 pins | 2 | ||
| Junction-to-case (bottom) thermal resistance | θJCbot | 2.1 | °C/W | RSL 48 pins | 2 | ||
| VBAT input voltage | VBAT | -0.1 | 28 | V | 3 | ||
| V5DRV, V5 input voltage | V5 | 4.5 | 5.5 | V | 3 | ||
| V3R3 input voltage | V3R3 | 3.1 | 3.5 | V | 3 | ||
| Operating free air temperature | TA | -10 | 105 | °C | TPS51650 | 3 | |
| V5 supply current, CPU 3-phase, GPU 2-phase active | IV5-5 | 7.5 | 11 | mA | IV5+IV5DRV, VVDAC < VxVFB < VVDAC+100 mV, VR_ON = HI | 4 | |
| V5 supply current, GPU off | IV5-3 | 5.5 | mA | VR_ON = HI, VGCSP2 = 3.3 V | 4 | ||
| V5 supply current PS3 | IV5-PS3 | 5.5 | mA | VR_ON = HI, SetPS = PS3 | 4 | ||
| V5DRV standby current | IV5STBY | 10 | 20 | µA | VR_ON = LO, IV5 + IV5DRV | 4 | |
| V5 UVLO OK threshold | VUVLOH | 4.25 | 4.35 | 4.5 | V | Ramp up, VR_ON=HI | 4 |
| V5 UVLO fault threshold | VUVLOL | 3.95 | 4.1 | 4.3 | V | Ramp down, VR_ON=HI | 4 |
| V5 POR fault latch | VPORV5 | 1.2 | 1.9 | 2.5 | V | Specified by design | 4 |
| V3R3 supply current | IV3R3 | 0.5 | 1 | mA | SVID bus idle, VR_ON = HI | 4 | |
| V3R3 standby current | IV3R3SBY | 10 | µA | VR_ON = LO | 4 | ||
| V3R3 UVLO OK threshold | V3UVLOH | 2.5 | 2.9 | 3 | V | Ramp up, VR_ON=HI | 4 |
| V3R3 UVLO fault threshold | V3UVLOL | 2.4 | 2.7 | 2.8 | V | Ramp down, VR_ON=HI | 4 |
| V3R3 POR fault latch | VPORV3R3 | 1.2 | 1.9 | 2.5 | V | Specified by design | 4 |
| xVFB tolerance 0.25-0.595 V | VDAC1 | -6 | 6 | mV | 0.25 ≤ VxVFB ≤ 0.595V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 | |
| xVFB tolerance 0.6-0.995 V | VDAC1 | -5 | 5 | mV | 0.6 ≤ VxVFB ≤ 0.995V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 | |
| xVFB tolerance 1.000-1.520 V | VDAC2 | -0.5 | 0.5 | % | 1.000V ≤ VxVFB ≤ 1.520 V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 | |
| VREF output | VVREF | 1.655 | 1.7 | 1.745 | V | 4.5 V ≤ VV5 ≤ 5.5 V, IVREF = 0 A | 4 |
| VREF output source | VVREFSRC | -4 | -0.1 | mV | 0 µA ≤ IVREF ≤ 500 µA | 4 | |
| VREF output sink | VVREFSNK | 0.1 | 4 | mV | -500 µA ≤ IVREF ≤ 0 µA | 4 | |
| xVFB input bias current | IxVFB | 20 | 40 | µA | VxVFB= 2 V, VxGFB= 0 V | 4 | |
| xGFB input bias current | IxGFB | -40 | -20 | µA | VxVFB= 2 V, VxGFB= 0 V | 4 | |
| OCP voltage RxOCP-R = 20 kΩ | VOCPP | 4.6 | 7 | 9.2 | mV | RxOCP-R = 20 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 24 kΩ | VOCPP | 7.6 | 10 | 12.1 | mV | RxOCP-R = 24 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 30 kΩ | VOCPP | 11.6 | 14 | 16.2 | mV | RxOCP-R = 30 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 39 kΩ | VOCPP | 16.5 | 19 | 21.2 | mV | RxOCP-R = 39 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 56 kΩ | VOCPP | 22.3 | 25 | 27.2 | mV | RxOCP-R = 56 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 75 kΩ | VOCPP | 29.2 | 32 | 34.5 | mV | RxOCP-R = 75 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 100 kΩ | VOCPP | 37.1 | 40 | 42.5 | mV | RxOCP-R = 100 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 150 kΩ | VOCPP | 46.1 | 49 | 51.9 | mV | RxOCP-R = 150 kΩ, TPS51650 | 5 |
| CS pin input bias current | ICS | -1 | 0.2 | 1 | µA | CSPx and CSNx | 5 |
| xVFB discharge input bias current | IxVFBDQ | 90 | 125 | 180 | µA | End of soft-stop, xVFB = 100 mV | 5 |
| Droop amplifier transconductance | GM-DROOP | 486 | 497 | 518 | µS | xVFB = 1 V, TPS51650 | 5 |
| Internal current share tolerance | IBAL_TOL | -3 | 3 | % | (VCSP1-VCSN1) = (VCSP2-VCSN2) = (VCSP3-VCSN3) = VOCPP_MIN | 5 | |
| Internal current sense gain | ACSINT | 11.65 | 12 | 12.3 | V/V | Gain from CSPx, CSNx to PWM comparator | 5 |
| Start-up time | tSTARTUP1 | 5 | ms | VBOOT > 0 V, SLEWRATE = 12 mV/µs, no faults, VR_ON to controller responding | 6 | ||
| xVFB slew soft-start / soft-stop | SLSTRTSTP | 1.25 | 1.5 | 1.75 | mV/µs | SLEWRATE = 12mV/µs | 6 |
| Slew rate setting VSLEWA ≤ 0.30 V | SLSET | 10 | 12 | 14.5 | mV/µs | VSLEWA ≤ 0.30V | 6 |
| Slew rate setting VSLEWA = 0.4 V | SLSET | 3 | 4 | 5 | mV/µs | VSLEWA = 0.4 V | 6 |
| Slew rate setting VSLEWA = 0.6 V | SLSET | 7 | 8 | 10 | mV/µs | VSLEWA = 0.6 V | 6 |
| Slew rate setting 0.75-0.85 V | SLSET | 10 | 12 | 14.5 | mV/µs | 0.75 V ≤ VSLEWA ≤ 0.85 V | 6 |
| xPGOOD deglitch time (over) | tPGDDGLTO | 5 | 15 | µs | Time from xVFB out of +220 mV VDAC boundary to xPGOOD low | 6 | |
| xPGOOD deglitch time (under) | tPGDDGLTU | 50 | 100 | µs | Time from xVFB out of -315 mV VDAC boundary to xPGOOD low | 6 | |
| CPU on-time 20 kΩ | tTON_CPU | 300 | 317 | 340 | ns | CF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (250 kHz) | 6 |
| CPU on-time 24 kΩ | tTON_CPU | 245 | 261 | 284 | ns | CF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (300 kHz) | 6 |
| CPU on-time 30 kΩ | tTON_CPU | 210 | 223 | 242 | ns | CF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (350 kHz) | 6 |
| CPU on-time 39 kΩ | tTON_CPU | 184 | 196 | 216 | ns | CF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (400 kHz) | 6 |
| CPU on-time 56 kΩ | tTON_CPU | 169 | 181 | 201 | ns | CF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (450 kHz) | 6 |
| CPU on-time 75 kΩ | tTON_CPU | 153 | 164 | 184 | ns | CF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (500 kHz) | 6 |
| CPU on-time 100 kΩ | tTON_CPU | 140 | 151 | 171 | ns | CF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) | 6 |
| CPU on-time 150 kΩ | tTON_CPU | 130 | 140 | 160 | ns | CF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (600 kHz) | 6 |
| GPU on-time 20 kΩ | tTON_GPU | 282 | 323 | 377 | ns | GF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (275 kHz) | 7 |
| GPU on-time 24 kΩ | tTON_GPU | 233 | 270 | 319 | ns | GF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (330 kHz) | 7 |
| GPU on-time 30 kΩ | tTON_GPU | 208 | 236 | 280 | ns | GF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (385 kHz) | 7 |
| GPU on-time 39 kΩ | tTON_GPU | 185 | 210 | 248 | ns | GF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (440 kHz) | 7 |
| GPU on-time 56 kΩ | tTON_GPU | 172 | 195 | 230 | ns | GF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (495 kHz) | 7 |
| GPU on-time 75 kΩ | tTON_GPU | 158 | 178 | 211 | ns | GF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) | 7 |
| GPU on-time 100 kΩ | tTON_GPU | 147 | 166 | 203 | ns | GF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (605 kHz) | 7 |
| GPU on-time 150 kΩ | tTON_GPU | 141 | 157 | 193 | ns | GF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (660 kHz) | 7 |
| Controller minimum off time | tMIN | 150 | 225 | ns | Fixed value | 7 | |
| VID change to xVFB change | tVCCVID | 2 | µs | ACK of SetVID-x to start of voltage ramp; specified by design | 7 | ||
| VR_ON low to xPGOOD low | tVRONPGD | 60 | 100 | ns | 7 | ||
| VR_HOT deglitch time | tVRTDGLT | 0.2 | 0.5 | ms | 7 | ||
| Soft-stop transistor resistance | RSFTSTP | 500 | 740 | 1100 | Ω | Connect to CVFB, GVFB | 7 |
| Fixed OVP voltage threshold | VOVPH | 1.67 | 1.72 | 1.77 | V | VCSN1 or VGCSN > VOVPH for 1 µs, DRVL → ON | 7 |
| xPGOOD high threshold | VPGDH | 190 | 220 | 245 | mV | Measured at xVFB pin wrt VID code, device latches OFF | 7 |
| xPGOOD low threshold | VPGDL | -348 | -315 | -278 | mV | Measured at xVFB pin wrt VID code, device latches OFF | 7 |
| THERM bit0 voltage | VTHERM | 755 | 783 | 810 | mV | bit0 of xTHERM register = high | 7 |
| THERM bit1 voltage | VTHERM | 657 | 680 | 707 | mV | bit1 of xTHERM register also is high | 7 |
| THERM bit2 voltage | VTHERM | 611 | 638 | 665 | mV | bit2 of xTHERM register also is high | 7 |
| THERM bit3 voltage | VTHERM | 569 | 598 | 624 | mV | bit3 of xTHERM register also is high | 7 |
| THERM bit4 voltage | VTHERM | 532 | 559 | 585 | mV | bit4 of xTHERM register also is high | 7 |
| THERM bit5 voltage | VTHERM | 498 | 523 | 549 | mV | bit5 of xTHERM register also is high | 7 |
| THERM bit6 voltage | VTHERM | 462 | 455 | 514 | mV | bit6 of xTHERM register also is high, ALERT goes low | 7 |
| THERM bit7 voltage | VTHERM | 430 | 455 | 481 | mV | bit7 of xTHERM register also is high, VR_HOT goes low | 7 |
| CDLx/CDHx low THERM voltage | VTHERM | 373 | 410 | 428 | mV | CDLx goes low, CDHx goes low | 7 |
| THERM current | ITHRM | -2 | 2 | µA | Leakage current, VxTHERM = 1 V | 7 | |
| Internal controller thermal shutdown | THINT | 155 | °C | Latch off controller; specified by design | 7 | ||
| Thermal shutdown hysteresis | THHYS | 20 | °C | Cooling required before converter can be reset; specified by design | 7 | ||
| VDIO/ALERT/VR_HOT open drain pull-down resistance | RRSVIDL | 4 | 8 | 13 | Ω | at 0.31 V | 8 |
| xPGOOD pull-down resistance | RRPGDL | 36 | 50 | Ω | at 0.31 V | 8 | |
| Open drain leakage current | IVRTTLK | -2 | 0.2 | 2 | µA | Hi-Z leakage, apply 3.3-V in off state | 8 |
| Input logic low | VIL | 0.45 | V | VCLK, VDIO | 8 | ||
| Input logic high | VIH | 0.65 | V | VCLK, VDIO | 8 | ||
| VR_ON logic low | VVR_ONL | 0.3 | V | 8 | |||
| VR_ON logic high | VVR_ONH | 0.8 | V | 8 | |||
| I/O 3.3 V leakage | IVR_ONH | 8 | 25 | µA | VVR_ON = 1.1 V | 8 | |
| DRVH on-resistance HI | RDRVH | 1.2 | 2.5 | Ω | (VCBSTx, VCSWx) = 5 V, HI state | 9 | |
| DRVH on-resistance LO | RDRVH | 0.8 | 2.5 | Ω | (VCBSTx, VCSWx) = 5 V, LO state | 9 | |
| DRVH transition time | tDRVH | 15 | 40 | ns | CDHx 10% to 90% or 90% to 10%, CCDHx = 3 nF | 9 | |
| DRVL on resistance HI | RDRVL | 0.9 | 2 | Ω | HI state, (VV5DRV, VVDRVL) = 0.25 V | 9 | |
| DRVL on resistance LO | RDRVL | 0.4 | 1 | Ω | LO state, (VVDRVL, VPGND)= 0.2 V | 9 | |
| DRVL transition time | tDRVL | 15 | 40 | ns | CCDLx = 3 nF | 9 | |
| Driver non overlap time | tNONOVLP | 8 | 25 | ns | VCSWx falls to 1 V to VCDLx rises to 1 V | 9 | |
| BST on-resistance | RDS(on) | 5 | 10 | 22 | Ω | (VV5DRV, VVBST), IF = 5 mA | 9 |
| BST switch leakage current | IBSTLK | 0.1 | 1 | µA | VVBST = 34 V, VCSWx= 28 V | 9 | |
| xPWMy output low level | VPWML | 0.3 | V | 9 | |||
| xPWMy output high level | VPWMH | 4.2 | V | 9 | |||
| xPWM leakage | VPW(leak) | 0.1 | µA | Tri-state, VxPWMx = 5 V | 9 |
CAD (KiCad official)
- Symbol:
TPS51650RSLR - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm - 3D model: VQFN-48-EP(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps51650rslr-etched.step/tps51650rslr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps51650rslr.step/tps51650rslr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
d8b71e3a95647d43, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS51650RSLR
**Texas Instruments** · DC-DC Converters · VQFN-48-EP(6x6)
TPS51650RSLR from Texas Instruments, in a VQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTHERM | bidirectional | Thermal sensor connection for the CPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND. |
| 2 | COCP-R | input | A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the CPU converter, and the pin voltage sets 1 of 8 USR/OSR levels. |
| 3 | CF-IMAX | input | Voltage divider to VREF; a resistor to GND sets the CPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up. |
| 4 | CCSP1 | input | Positive current sense input for CPU phase 1; tie to V3R3 to run the GPU converter only. |
| 5 | CCSN1 | input | Negative current sense input for CPU phase 1 with a secondary OVP comparator; connect to the most negative node of the sense resistor or inductor DCR network. |
| 6 | CCSN2 | input | Negative current sense input for CPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network. |
| 7 | CCSP2 | input | Positive current sense input for CPU phase 2; tie to V3R3 to disable the phase. |
| 8 | CCSP3 | input | Positive current sense input for CPU phase 3; tie to V3R3 to disable the phase. |
| 9 | CCSN3 | input | Negative current sense input for CPU phase 3; connect to the most negative node of the sense resistor or inductor DCR network. |
| 10 | CCOMP | output | Output of the GM error amplifier for the CPU converter; a resistor to VREF sets the droop gain. |
| 11 | CVFB | input | Voltage sense line tied directly to VCORE of the CPU converter (soft-stop transistor is on this pin); tie to VCORE with a 10-Ω resistor to close feedback when the µP is not in the socket. |
| 12 | CGFB | input | Voltage sense return for the CPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket. |
| 13 | GOCP-R | input | A resistor to GND selects 1 of 8 per-phase OCP levels (latched at start-up) for the GPU converter, and the pin voltage sets 1 of 8 USR/OSR levels. |
| 14 | VREF | power_in | 1.7-V, 500-µA reference; bypass to GND with a 0.22-µF ceramic capacitor. |
| 15 | V3R3 | power_in | 3.3-V power input; bypass to GND with ≥1 µF ceramic capacitor. |
| 16 | VR_ON | input | IMVP-7 VR enable with 1-V I/O level and 100-ns de-bounce; the regulator enters controlled soft-stop when brought low. |
| 17 | CPGOOD | output | Open-drain IMVP-7_PWRGD output for the CPU converter. |
| 18 | VCLK | input | SVID clock input with 1-V logic level. |
| 19 | ALERT | output | Open-drain SVID interrupt line; route between VCLK and VDIO to prevent cross-talk. |
| 20 | VDIO | bidirectional | SVID digital I/O line with 1-V logic level. |
| 21 | VR_HOT | output | IMVP-7 thermal flag, open-drain active low, typically pulled up to 1-V logic through 56 Ω; fall time <100 ns with 1-ms de-glitch. |
| 22 | SLEWA | input | Start-up voltage sets 1 of 7 slew rates for both converters (latched; soft-start/soft-stop are SLEWRATE/8); on TPS59650 the resistor to GND sets the base SVID address. |
| 23 | GPGOOD | output | Open-drain IMVP-7_PWRGD output for the GPU converter. |
| 24 | GF-IMAX | input | Voltage divider to VREF; a resistor to GND sets the GPU converter operating frequency and the voltage level sets IMAX (VIMAX = VREF × IMAX/255), both latched at start-up. |
| 25 | GGFB | input | Voltage sense return for the GPU converter; tie to GND with a 10-Ω resistor to close feedback when the microprocessor is not in the socket. |
| 26 | GVFB | input | Voltage sense line tied directly to VGFX of the GPU converter (soft-stop transistor is on this pin); tie to VGFX with a 10-Ω resistor when the microprocessor is not in the socket. |
| 27 | GCOMP | output | Output of the gM error amplifier for the GPU converter; a resistor to VREF sets the droop gain. |
| 28 | GCSN1 | input | Negative current sense input for GPU phase 1; connect to the most negative node of the sense resistor or inductor DCR network. |
| 29 | GCSP1 | input | Positive current sense input for GPU phase 1; tie GCSP1 and GCSP2 to V3R3 to disable the GPU converter completely. |
| 30 | GCSP2 | input | Positive current sense input for GPU phase 2; tie to V3R3 to disable the phase. |
| 31 | GCSN2 | input | Negative current sense input for GPU phase 2; connect to the most negative node of the sense resistor or inductor DCR network. |
| 32 | GTHERM | bidirectional | Thermal sensor input for the GPU converter, with a resistor to VREF forming a divider with an NTC thermistor to GND. |
| 33 | GSKIP | output | Skip mode control of the external GPU driver, 5-V logic (HI = FCCM, LO = SKIP); a defined start-up voltage level can turn OSR OFF or USR OFF. |
| 34 | GPWM1 | output | PWM control for the external driver of GPU phase 1, 5-V logic level. |
| 35 | GPWM2 | output | PWM control for the external driver of GPU phase 2, 5-V logic level. |
| 36 | CPWM3 | output | PWM control for the external driver of CPU phase 3, 5-V logic level. |
| 37 | VBAT | power_in | Provides VBAT information to the on-time circuits for both converters; a 10-kΩ series resistor protects against solder bridges or mis-probing. |
| 38 | CDH2 | output | Top N-channel FET gate drive output for CPU phase 2. |
| 39 | CBST2 | input | Top N-channel FET bootstrap voltage input for CPU phase 2. |
| 40 | CSW2 | passive | Top N-channel FET gate drive return for CPU phase 2. |
| 41 | CDL2 | output | Synchronous N-channel FET gate drive output for CPU phase 2. |
| 42 | PGND | power_in | Synchronous N-channel FET gate drive return; connect directly to the gate driver decoupling capacitor ground, not to the thermal pad. |
| 43 | V5DRV | power_in | Power input for the gate drivers, connected with an external resistor to V5; decouple with a ≥2.2 µF ceramic capacitor. |
| 44 | CDL1 | output | Synchronous N-channel FET gate drive output for CPU phase 1. |
| 45 | CSW1 | passive | Top N-channel FET gate drive return for CPU phase 1. |
| 46 | CBST1 | input | Top N-channel FET bootstrap voltage input for CPU phase 1. |
| 47 | CDH1 | output | Top N-channel FET gate drive output for CPU phase 1. |
| 48 | V5 | power_in | 5-V power input for analog circuits; connect through a resistor to the 5-V plane and bypass to GND with ≥1 µF ceramic capacitor. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-48-EP(6x6) |
| Category | Power Supply Chip |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating junction temperature | TJ | -40 | | 125 | °C | | 2 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 2 |
| VBAT input voltage abs max | VBAT | -0.3 | | 32 | V | | 2 |
| CSW1, CSW2 abs max | CSW | -6 | | 32 | V | | 2 |
| V5DRV, V5 abs max | V5 | -0.3 | | 6 | V | | 2 |
| V3R3 abs max | V3R3 | -0.3 | | 3.6 | V | | 2 |
| VREF abs max | VREF | -0.3 | | 1.8 | V | | 2 |
| ESD HBM | | | | 2 | kV | HBM QSS 009-105 (JESD22-A114A) | 2 |
| ESD CDM | | | | 500 | V | CDM QSS 009-147 (JESD22-C101B.01) | 2 |
| Junction-to-ambient thermal resistance | θJA | | 31.7 | | °C/W | RSL 48 pins | 2 |
| Junction-to-case (top) thermal resistance | θJCtop | | 19.8 | | °C/W | RSL 48 pins | 2 |
| Junction-to-board thermal resistance | θJB | | 7.1 | | °C/W | RSL 48 pins | 2 |
| Junction-to-case (bottom) thermal resistance | θJCbot | | 2.1 | | °C/W | RSL 48 pins | 2 |
| VBAT input voltage | VBAT | -0.1 | | 28 | V | | 3 |
| V5DRV, V5 input voltage | V5 | 4.5 | | 5.5 | V | | 3 |
| V3R3 input voltage | V3R3 | 3.1 | | 3.5 | V | | 3 |
| Operating free air temperature | TA | -10 | | 105 | °C | TPS51650 | 3 |
| V5 supply current, CPU 3-phase, GPU 2-phase active | IV5-5 | | 7.5 | 11 | mA | IV5+IV5DRV, VVDAC < VxVFB < VVDAC+100 mV, VR_ON = HI | 4 |
| V5 supply current, GPU off | IV5-3 | | | 5.5 | mA | VR_ON = HI, VGCSP2 = 3.3 V | 4 |
| V5 supply current PS3 | IV5-PS3 | | | 5.5 | mA | VR_ON = HI, SetPS = PS3 | 4 |
| V5DRV standby current | IV5STBY | | 10 | 20 | µA | VR_ON = LO, IV5 + IV5DRV | 4 |
| V5 UVLO OK threshold | VUVLOH | 4.25 | 4.35 | 4.5 | V | Ramp up, VR_ON=HI | 4 |
| V5 UVLO fault threshold | VUVLOL | 3.95 | 4.1 | 4.3 | V | Ramp down, VR_ON=HI | 4 |
| V5 POR fault latch | VPORV5 | 1.2 | 1.9 | 2.5 | V | Specified by design | 4 |
| V3R3 supply current | IV3R3 | | 0.5 | 1 | mA | SVID bus idle, VR_ON = HI | 4 |
| V3R3 standby current | IV3R3SBY | | | 10 | µA | VR_ON = LO | 4 |
| V3R3 UVLO OK threshold | V3UVLOH | 2.5 | 2.9 | 3 | V | Ramp up, VR_ON=HI | 4 |
| V3R3 UVLO fault threshold | V3UVLOL | 2.4 | 2.7 | 2.8 | V | Ramp down, VR_ON=HI | 4 |
| V3R3 POR fault latch | VPORV3R3 | 1.2 | 1.9 | 2.5 | V | Specified by design | 4 |
| xVFB tolerance 0.25-0.595 V | VDAC1 | -6 | | 6 | mV | 0.25 ≤ VxVFB ≤ 0.595V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 |
| xVFB tolerance 0.6-0.995 V | VDAC1 | -5 | | 5 | mV | 0.6 ≤ VxVFB ≤ 0.995V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 |
| xVFB tolerance 1.000-1.520 V | VDAC2 | -0.5 | | 0.5 | % | 1.000V ≤ VxVFB ≤ 1.520 V, IxPU_CORE = 0 A, 0°C ≤ TA ≤ 85°C | 4 |
| VREF output | VVREF | 1.655 | 1.7 | 1.745 | V | 4.5 V ≤ VV5 ≤ 5.5 V, IVREF = 0 A | 4 |
| VREF output source | VVREFSRC | -4 | | -0.1 | mV | 0 µA ≤ IVREF ≤ 500 µA | 4 |
| VREF output sink | VVREFSNK | 0.1 | | 4 | mV | -500 µA ≤ IVREF ≤ 0 µA | 4 |
| xVFB input bias current | IxVFB | | 20 | 40 | µA | VxVFB= 2 V, VxGFB= 0 V | 4 |
| xGFB input bias current | IxGFB | -40 | -20 | | µA | VxVFB= 2 V, VxGFB= 0 V | 4 |
| OCP voltage RxOCP-R = 20 kΩ | VOCPP | 4.6 | 7 | 9.2 | mV | RxOCP-R = 20 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 24 kΩ | VOCPP | 7.6 | 10 | 12.1 | mV | RxOCP-R = 24 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 30 kΩ | VOCPP | 11.6 | 14 | 16.2 | mV | RxOCP-R = 30 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 39 kΩ | VOCPP | 16.5 | 19 | 21.2 | mV | RxOCP-R = 39 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 56 kΩ | VOCPP | 22.3 | 25 | 27.2 | mV | RxOCP-R = 56 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 75 kΩ | VOCPP | 29.2 | 32 | 34.5 | mV | RxOCP-R = 75 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 100 kΩ | VOCPP | 37.1 | 40 | 42.5 | mV | RxOCP-R = 100 kΩ, TPS51650 | 5 |
| OCP voltage RxOCP-R = 150 kΩ | VOCPP | 46.1 | 49 | 51.9 | mV | RxOCP-R = 150 kΩ, TPS51650 | 5 |
| CS pin input bias current | ICS | -1 | 0.2 | 1 | µA | CSPx and CSNx | 5 |
| xVFB discharge input bias current | IxVFBDQ | 90 | 125 | 180 | µA | End of soft-stop, xVFB = 100 mV | 5 |
| Droop amplifier transconductance | GM-DROOP | 486 | 497 | 518 | µS | xVFB = 1 V, TPS51650 | 5 |
| Internal current share tolerance | IBAL_TOL | -3 | | 3 | % | (VCSP1-VCSN1) = (VCSP2-VCSN2) = (VCSP3-VCSN3) = VOCPP_MIN | 5 |
| Internal current sense gain | ACSINT | 11.65 | 12 | 12.3 | V/V | Gain from CSPx, CSNx to PWM comparator | 5 |
| Start-up time | tSTARTUP1 | | | 5 | ms | VBOOT > 0 V, SLEWRATE = 12 mV/µs, no faults, VR_ON to controller responding | 6 |
| xVFB slew soft-start / soft-stop | SLSTRTSTP | 1.25 | 1.5 | 1.75 | mV/µs | SLEWRATE = 12mV/µs | 6 |
| Slew rate setting VSLEWA ≤ 0.30 V | SLSET | 10 | 12 | 14.5 | mV/µs | VSLEWA ≤ 0.30V | 6 |
| Slew rate setting VSLEWA = 0.4 V | SLSET | 3 | 4 | 5 | mV/µs | VSLEWA = 0.4 V | 6 |
| Slew rate setting VSLEWA = 0.6 V | SLSET | 7 | 8 | 10 | mV/µs | VSLEWA = 0.6 V | 6 |
| Slew rate setting 0.75-0.85 V | SLSET | 10 | 12 | 14.5 | mV/µs | 0.75 V ≤ VSLEWA ≤ 0.85 V | 6 |
| xPGOOD deglitch time (over) | tPGDDGLTO | | 5 | 15 | µs | Time from xVFB out of +220 mV VDAC boundary to xPGOOD low | 6 |
| xPGOOD deglitch time (under) | tPGDDGLTU | | 50 | 100 | µs | Time from xVFB out of -315 mV VDAC boundary to xPGOOD low | 6 |
| CPU on-time 20 kΩ | tTON_CPU | 300 | 317 | 340 | ns | CF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (250 kHz) | 6 |
| CPU on-time 24 kΩ | tTON_CPU | 245 | 261 | 284 | ns | CF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (300 kHz) | 6 |
| CPU on-time 30 kΩ | tTON_CPU | 210 | 223 | 242 | ns | CF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (350 kHz) | 6 |
| CPU on-time 39 kΩ | tTON_CPU | 184 | 196 | 216 | ns | CF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (400 kHz) | 6 |
| CPU on-time 56 kΩ | tTON_CPU | 169 | 181 | 201 | ns | CF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (450 kHz) | 6 |
| CPU on-time 75 kΩ | tTON_CPU | 153 | 164 | 184 | ns | CF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (500 kHz) | 6 |
| CPU on-time 100 kΩ | tTON_CPU | 140 | 151 | 171 | ns | CF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) | 6 |
| CPU on-time 150 kΩ | tTON_CPU | 130 | 140 | 160 | ns | CF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (600 kHz) | 6 |
| GPU on-time 20 kΩ | tTON_GPU | 282 | 323 | 377 | ns | GF= 20 kΩ, VBAT= 12 V, VDAC= 1.1 V (275 kHz) | 7 |
| GPU on-time 24 kΩ | tTON_GPU | 233 | 270 | 319 | ns | GF= 24 kΩ, VBAT= 12 V, VDAC= 1.1 V (330 kHz) | 7 |
| GPU on-time 30 kΩ | tTON_GPU | 208 | 236 | 280 | ns | GF= 30 kΩ, VBAT= 12 V, VDAC= 1.1 V (385 kHz) | 7 |
| GPU on-time 39 kΩ | tTON_GPU | 185 | 210 | 248 | ns | GF= 39 kΩ, VBAT= 12 V, VDAC= 1.1 V (440 kHz) | 7 |
| GPU on-time 56 kΩ | tTON_GPU | 172 | 195 | 230 | ns | GF= 56 kΩ, VBAT= 12 V, VDAC= 1.1 V (495 kHz) | 7 |
| GPU on-time 75 kΩ | tTON_GPU | 158 | 178 | 211 | ns | GF= 75 kΩ, VBAT= 12 V, VDAC= 1.1 V (550 kHz) | 7 |
| GPU on-time 100 kΩ | tTON_GPU | 147 | 166 | 203 | ns | GF= 100 kΩ, VBAT= 12 V, VDAC= 1.1 V (605 kHz) | 7 |
| GPU on-time 150 kΩ | tTON_GPU | 141 | 157 | 193 | ns | GF= 150 kΩ, VBAT= 12 V, VDAC= 1.1 V (660 kHz) | 7 |
| Controller minimum off time | tMIN | | 150 | 225 | ns | Fixed value | 7 |
| VID change to xVFB change | tVCCVID | | | 2 | µs | ACK of SetVID-x to start of voltage ramp; specified by design | 7 |
| VR_ON low to xPGOOD low | tVRONPGD | | 60 | 100 | ns | | 7 |
| VR_HOT deglitch time | tVRTDGLT | | 0.2 | 0.5 | ms | | 7 |
| Soft-stop transistor resistance | RSFTSTP | 500 | 740 | 1100 | Ω | Connect to CVFB, GVFB | 7 |
| Fixed OVP voltage threshold | VOVPH | 1.67 | 1.72 | 1.77 | V | VCSN1 or VGCSN > VOVPH for 1 µs, DRVL → ON | 7 |
| xPGOOD high threshold | VPGDH | 190 | 220 | 245 | mV | Measured at xVFB pin wrt VID code, device latches OFF | 7 |
| xPGOOD low threshold | VPGDL | -348 | -315 | -278 | mV | Measured at xVFB pin wrt VID code, device latches OFF | 7 |
| THERM bit0 voltage | VTHERM | 755 | 783 | 810 | mV | bit0 of xTHERM register = high | 7 |
| THERM bit1 voltage | VTHERM | 657 | 680 | 707 | mV | bit1 of xTHERM register also is high | 7 |
| THERM bit2 voltage | VTHERM | 611 | 638 | 665 | mV | bit2 of xTHERM register also is high | 7 |
| THERM bit3 voltage | VTHERM | 569 | 598 | 624 | mV | bit3 of xTHERM register also is high | 7 |
| THERM bit4 voltage | VTHERM | 532 | 559 | 585 | mV | bit4 of xTHERM register also is high | 7 |
| THERM bit5 voltage | VTHERM | 498 | 523 | 549 | mV | bit5 of xTHERM register also is high | 7 |
| THERM bit6 voltage | VTHERM | 462 | 455 | 514 | mV | bit6 of xTHERM register also is high, ALERT goes low | 7 |
| THERM bit7 voltage | VTHERM | 430 | 455 | 481 | mV | bit7 of xTHERM register also is high, VR_HOT goes low | 7 |
| CDLx/CDHx low THERM voltage | VTHERM | 373 | 410 | 428 | mV | CDLx goes low, CDHx goes low | 7 |
| THERM current | ITHRM | -2 | | 2 | µA | Leakage current, VxTHERM = 1 V | 7 |
| Internal controller thermal shutdown | THINT | | 155 | | °C | Latch off controller; specified by design | 7 |
| Thermal shutdown hysteresis | THHYS | | 20 | | °C | Cooling required before converter can be reset; specified by design | 7 |
| VDIO/ALERT/VR_HOT open drain pull-down resistance | RRSVIDL | 4 | 8 | 13 | Ω | at 0.31 V | 8 |
| xPGOOD pull-down resistance | RRPGDL | | 36 | 50 | Ω | at 0.31 V | 8 |
| Open drain leakage current | IVRTTLK | -2 | 0.2 | 2 | µA | Hi-Z leakage, apply 3.3-V in off state | 8 |
| Input logic low | VIL | | | 0.45 | V | VCLK, VDIO | 8 |
| Input logic high | VIH | 0.65 | | | V | VCLK, VDIO | 8 |
| VR_ON logic low | VVR_ONL | | | 0.3 | V | | 8 |
| VR_ON logic high | VVR_ONH | 0.8 | | | V | | 8 |
| I/O 3.3 V leakage | IVR_ONH | | 8 | 25 | µA | VVR_ON = 1.1 V | 8 |
| DRVH on-resistance HI | RDRVH | | 1.2 | 2.5 | Ω | (VCBSTx, VCSWx) = 5 V, HI state | 9 |
| DRVH on-resistance LO | RDRVH | | 0.8 | 2.5 | Ω | (VCBSTx, VCSWx) = 5 V, LO state | 9 |
| DRVH transition time | tDRVH | | 15 | 40 | ns | CDHx 10% to 90% or 90% to 10%, CCDHx = 3 nF | 9 |
| DRVL on resistance HI | RDRVL | | 0.9 | 2 | Ω | HI state, (VV5DRV, VVDRVL) = 0.25 V | 9 |
| DRVL on resistance LO | RDRVL | | 0.4 | 1 | Ω | LO state, (VVDRVL, VPGND)= 0.2 V | 9 |
| DRVL transition time | tDRVL | | 15 | 40 | ns | CCDLx = 3 nF | 9 |
| Driver non overlap time | tNONOVLP | | 8 | 25 | ns | VCSWx falls to 1 V to VCDLx rises to 1 V | 9 |
| BST on-resistance | RDS(on) | 5 | 10 | 22 | Ω | (VV5DRV, VVBST), IF = 5 mA | 9 |
| BST switch leakage current | IBSTLK | | 0.1 | 1 | µA | VVBST = 34 V, VCSWx= 28 V | 9 |
| xPWMy output low level | VPWML | | | 0.3 | V | | 9 |
| xPWMy output high level | VPWMH | 4.2 | | | V | | 9 |
| xPWM leakage | VPW(leak) | | | 0.1 | µA | Tri-state, VxPWMx = 5 V | 9 |
## CAD (KiCad official)
- Symbol: `TPS51650RSLR`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm`
- 3D model: VQFN-48-EP(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `tps51650rslr-etched.step` / `tps51650rslr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps51650rslr.step` / `tps51650rslr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps51650) (50 pp, sha256 `d8b71e3a95647d43`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps51650rslr-datasheet.pdf)