main
Ray tps51220artvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 591b1b1
{
  "slug": "tps51220artvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps51220artvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps51220artvr.kicad_sym",
    "tps51220artvr.kicad_mod",
    "tps51220artvr.glb",
    "tps51220artvr.step",
    "tps51220artvr.lbr",
    "docs/hero.png",
    "docs/tps51220artvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS51220ARTVR",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps51220a",
    "parts": {
      "symbol": "tps51220artvr.kicad_sym",
      "footprint": "tps51220artvr.kicad_mod",
      "model_3d": "tps51220artvr-etched.glb",
      "model_3d_plain": "tps51220artvr.glb",
      "model_3d_step": "tps51220artvr-etched.step",
      "model_3d_step_plain": "tps51220artvr.step",
      "lbr": "tps51220artvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C201651"
    },
    "pins": [
      {
        "number": "1",
        "name": "DRVH1",
        "type": "output",
        "description": "High-side MOSFET gate driver output for channel 1; source 1.7 Ω, sink 1.0 Ω, SW1-node referenced floating driver, drive voltage corresponds to VBST1 to SW1 voltage."
      },
      {
        "number": "2",
        "name": "V5SW",
        "type": "power_in",
        "description": "VREG5 switchover power supply input; when EN1 is high, PGOOD1 is good and V5SW > 4.8 V, the internal 5-V LDO is shut off and VREG5 is switched to V5SW."
      },
      {
        "number": "3",
        "name": "RF",
        "type": "bidirectional",
        "description": "Frequency setting pin; connect a resistor to signal GND to set switching frequency, or connect to an external clock for synchronization."
      },
      {
        "number": "4",
        "name": "EN1",
        "type": "input",
        "description": "Channel 1 SMPS enable pin; apply greater than 0.55 V and less than 6 V to turn on, or leave floating; connect to GND to disable; adjustable soft-start capacitance may be attached here."
      },
      {
        "number": "5",
        "name": "PGOOD1",
        "type": "output",
        "description": "Powergood window comparator output for channel 1; recommended applied voltage less than 6 V, recommended pull-up resistance 100 kΩ to 1 MΩ."
      },
      {
        "number": "6",
        "name": "SKIPSEL1",
        "type": "input",
        "description": "Skip mode selection pin for channel 1; GND=continuous conduction, VREF2=Auto Skip, VREG3=OOA Auto Skip max 7 skips, VREG5=OOA Auto Skip max 15 skips."
      },
      {
        "number": "7",
        "name": "CSP1",
        "type": "bidirectional",
        "description": "Current sense comparator (+) input for channel 1; use an RC network with X5R/X7R ceramic capacitor (0.1 µF typical) to extract voltage drop across DCR."
      },
      {
        "number": "8",
        "name": "CSN1",
        "type": "input",
        "description": "Current sense comparator (-) input for channel 1; used as power supply for the channel-1 current sense circuit at 5 V or higher output settings, and as the output discharge terminal."
      },
      {
        "number": "9",
        "name": "VFB1",
        "type": "input",
        "description": "SMPS voltage feedback input for channel 1; connect the feedback resistor divider, referenced to signal GND."
      },
      {
        "number": "10",
        "name": "COMP1",
        "type": "input",
        "description": "Loop compensation pin for channel 1 current-mode error amplifier output; connect R (and C if required) from this pin to VREF2 for loop compensation."
      },
      {
        "number": "11",
        "name": "FUNC",
        "type": "input",
        "description": "Control architecture and OVP selection pin: GND=Current mode/OVP enable, VREF2=D-CAP mode/OVP disable, VREG3=D-CAP mode/OVP enable, VREG5=Current mode/OVP disable."
      },
      {
        "number": "12",
        "name": "EN",
        "type": "input",
        "description": "VREF2 and VREG5 linear regulator enable pin; apply greater than 1.2 V and less than 6 V to turn on; connect to GND to disable."
      },
      {
        "number": "13",
        "name": "VREF2",
        "type": "power_out",
        "description": "2-V reference output; bypass to signal GND with 0.22-µF ceramic capacitance."
      },
      {
        "number": "14",
        "name": "TRIP",
        "type": "input",
        "description": "Overcurrent trip level and discharge mode selection pin: GND=V(OCL-ULV) discharge on, VREF2=V(OCL-ULV) discharge off, VREG3=V(OCL-LV) discharge off, VREG5=V(OCL-LV) discharge on."
      },
      {
        "number": "15",
        "name": "COMP2",
        "type": "input",
        "description": "Ramp compensation/loop compensation pin for channel 2; connect R (10 kΩ typical, 6 kΩ-20 kΩ range) from this pin to VREF2 for D-CAP mode ramp compensation or current-mode loop compensation."
      },
      {
        "number": "16",
        "name": "VFB2",
        "type": "input",
        "description": "SMPS voltage feedback input for channel 2; connect the feedback resistor divider, referenced to signal GND."
      },
      {
        "number": "17",
        "name": "CSN2",
        "type": "input",
        "description": "Current sense comparator (-) input for channel 2; used as power supply for the channel-2 current sense circuit at 5 V or higher output settings, and as the output discharge terminal."
      },
      {
        "number": "18",
        "name": "CSP2",
        "type": "bidirectional",
        "description": "Current sense comparator (+) input for channel 2; use an RC network with X5R/X7R ceramic capacitor (0.1 µF typical) to extract voltage drop across DCR."
      },
      {
        "number": "19",
        "name": "SKIPSEL2",
        "type": "input",
        "description": "Skip mode selection pin for channel 2; GND=continuous conduction, VREF2=Auto Skip, VREG3=OOA Auto Skip max 7 skips, VREG5=OOA Auto Skip max 15 skips."
      },
      {
        "number": "20",
        "name": "PGOOD2",
        "type": "output",
        "description": "Powergood window comparator output for channel 2; recommended applied voltage less than 6 V, recommended pull-up resistance 100 kΩ to 1 MΩ."
      },
      {
        "number": "21",
        "name": "EN2",
        "type": "input",
        "description": "Channel 2 SMPS enable pin; apply greater than 0.55 V and less than 6 V to turn on, or leave floating; connect to GND to disable; adjustable soft-start capacitance may be attached here."
      },
      {
        "number": "22",
        "name": "VREG3",
        "type": "power_out",
        "description": "Always-alive 3.3-V, 10-mA LDO output; bypass to signal GND with more than 1-µF ceramic capacitance; runs from VIN or from VREG5 when switched over to V5SW."
      },
      {
        "number": "23",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for the 5-V and 3.3-V linear regulators; typically connected to VBAT."
      },
      {
        "number": "24",
        "name": "DRVH2",
        "type": "output",
        "description": "High-side MOSFET gate driver output for channel 2; source 1.7 Ω, sink 1.0 Ω, SW2-node referenced floating driver, drive voltage corresponds to VBST2 to SW2 voltage."
      },
      {
        "number": "25",
        "name": "SW2",
        "type": "bidirectional",
        "description": "High-side MOSFET gate driver return for channel 2 (switch node)."
      },
      {
        "number": "26",
        "name": "VBST2",
        "type": "power_in",
        "description": "Supply input for channel-2 high-side N-channel FET driver (boot strap terminal); connect a capacitor (0.1 µF or greater recommended) from this pin to SW2; an optional Schottky diode from VREG5 is allowed."
      },
      {
        "number": "27",
        "name": "DRVL2",
        "type": "output",
        "description": "Low-side MOSFET gate driver output for channel 2; source 1.3 Ω, sink 0.7 Ω, GND-referenced driver."
      },
      {
        "number": "28",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground reference for the device."
      },
      {
        "number": "29",
        "name": "VREG5",
        "type": "power_out",
        "description": "5-V, 100-mA LDO output; bypass to power GND with a 10-µF (min 4.7-µF) ceramic capacitor; runs from VIN, internally connected to VBST and DRVL, shuts off with EN, switches over to V5SW when 4.8 V or above is provided."
      },
      {
        "number": "30",
        "name": "DRVL1",
        "type": "output",
        "description": "Low-side MOSFET gate driver output for channel 1; source 1.3 Ω, sink 0.7 Ω, GND-referenced driver."
      },
      {
        "number": "31",
        "name": "VBST1",
        "type": "power_in",
        "description": "Supply input for channel-1 high-side N-channel FET driver (boot strap terminal); connect a capacitor (0.1 µF or greater recommended) from this pin to SW1; an optional Schottky diode from VREG5 is allowed."
      },
      {
        "number": "32",
        "name": "SW1",
        "type": "bidirectional",
        "description": "High-side MOSFET gate driver return for channel 1 (switch node)."
      },
      {
        "number": "33",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Exposed thermal pad (PowerPAD); must be soldered to the PCB and connected to the internal GND plane through five or more 0.33-mm vias for thermal dissipation; do not connect the GND pin to this pad on the surface layer."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 55,
        "cost_usd": 0.5489,
        "at": "2026-09-23T13:06:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps51220a",
        "pages": 55,
        "sha256": "6e980b37451f3708",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps51220artvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps51220artvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7a14d7231a748a83e13410e2ee29800896580a15f7a83f4018abb168c42ba4cb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}