main
History Download
Ray Initial commit: component/tps2411pwr f7d7f88

TPS2411PWR

Texas Instruments · Power Distribution Switches · TSSOP-14

TPS2411PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage input for gate drive charge pump and internal control circuits; must be connected to ≥3V source.
2 RSET input Resistor connection to ground programs the fast turn-off comparator threshold; leaving open results in slightly positive V(A-C) threshold.
3 STAT bidirectional Multifunction pin with weak internal pull-up to VDD; outputs high when MOSFET gate is driven high and V(GATE) exceeds V(A) plus 0.4V; pulling low shifts fast turn-off threshold negative by approximately 157mV.
4 FLTB tri_state Open-drain fault output, active low when VDD is insufficient, GATE should be high but is not, or forward voltage exceeds 0.4V; 3ms deglitch filter on falling edge.
5 OV input Overvoltage monitor input with 0.6V threshold and 7mV hysteresis; excess voltage contributes to PG output and forces MOSFET off when above threshold.
6 UV input Undervoltage monitor input with 0.6V threshold and 7mV hysteresis; programmable via external resistor divider and contributes to PG output.
7 GND power_in Device ground reference; must have low impedance connection to ground plane.
8 GATE output Gate drive output for external N-channel MOSFET; driven positive with respect to A by charge pump referenced to BYP, with programmable fast turn-off to ground.
9 RSVD power_in Reserved pin; must be connected to GND for proper device operation.
10 C input Voltage sense cathode input for diode emulation; connect to MOSFET drain in typical configuration; protected by internal clamp diode.
11 A input Voltage sense anode input for diode emulation; serves as reference for charge pump bias supply on BYP; connect to MOSFET source in typical configuration.
12 FLTR input Filter input for fast comparator; capacitor from FLTR to A filters spurious transients; clamped to C voltage and may be left open for fastest response.
13 BYP bidirectional Charge pump output and internal bias supply for comparators and gate driver; 2200pF ceramic capacitor from BYP to A required for filtering; must not be shorted below A voltage.
14 PG tri_state Open-drain power-good indicator output; sinks to ground if UV above threshold, OV below threshold, or internal UVLO not satisfied; multiple PG pins may be wire-ORed.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Power Management (PMIC)
Pins 14

CAD (KiCad official)

  • Symbol: TPS2411PWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: tps2411pwr-etched.step / tps2411pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2411pwr.step / tps2411pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 6edb4f17085af239, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF