main
History Download
Ray Initial commit: component/tps2320ipwr a90789e

TPS2320IPWR

Texas Instruments · Supervisor And Reset ICs · TSSOP-16

TPS2320IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GATE1 output Gate drive output for channel 1 high-side MOSFET, 10-20 µA source and 50-100 µA sink current, 9-12 V gate-to-source clamp, 30 V maximum rating.
2 GATE2 output Gate drive output for channel 2 high-side MOSFET, 10-20 µA source and 50-100 µA sink current, 9-12 V gate-to-source clamp, 22 V maximum rating.
3 DGND power_in Digital ground reference, connect to AGND as close as possible.
4 TIMER output Overcurrent timing node with 50 µA charge current and 2.5 mA discharge current, capacitor charging to 0.5 V threshold triggers circuit-breaker latch.
5 VREG power_out Regulated 3.5-5.5 V regulator output powered from IN1, requires 0.1 µF bypass capacitor to ground for stable operation.
6 AGND power_in Analog ground reference, connect to DGND as close as possible.
7 ISENSE2 input Channel 2 current-sense input connected to voltage across sense resistor between IN2 and MOSFET drain, voltage must not exceed VI(IN2).
8 ISENSE1 input Channel 1 current-sense input connected to voltage across sense resistor between IN1 and MOSFET drain, voltage must not exceed VI(IN1).
9 IN1 power_in Primary power input 3-13 V, supplies device operating current for both channels and feeds internal LDO for VREG regulator.
10 IN2 power_in Secondary power input 3-5.5 V for channel 2 only, independent power rail from IN1.
11 ISET2 input Channel 2 current-limit setting input, external resistor to IN2 sets overcurrent threshold with 50 µA internal current source pulldown.
12 ISET1 input Channel 1 current-limit setting input, external resistor to IN1 sets overcurrent threshold with 50 µA internal current source pulldown.
13 FAULT output Open-drain overcurrent fault output pulled low when overcurrent condition persists until TIMER reaches 0.5 V, latches until device reset or enable toggle.
14 ENABLE input Active-low TTL/CMOS compatible enable input for TPS2320, 2 V high threshold and 0.8 V low threshold, disables gates when pulled high.
15 DISCH2 output Channel 2 discharge transistor output connected to external MOSFET source, provides gate voltage clamping reference and 10 mA discharge current for load capacitance.
16 DISCH1 output Channel 1 discharge transistor output connected to external MOSFET source, provides gate voltage clamping reference and 10 mA discharge current for load capacitance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Power Management (PMIC)
Pins 16

CAD (KiCad official)

  • Symbol: TPS2320IPWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tps2320ipwr-etched.step / tps2320ipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2320ipwr.step / tps2320ipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 0c4eed4165426632, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF