main
Ray Publish 0.1.0 3b611ef
{
  "slug": "tp4066-4-2v-dfn228",
  "version": "0.1.0",
  "type": "component",
  "description": "TOPPOWER(Nanjing Extension Microelectronics) Battery Management, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tp4066-4.2v-dfn228",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tp4066-4-2v-dfn228.kicad_sym",
    "tp4066-4-2v-dfn228.kicad_mod",
    "tp4066-4-2v-dfn228.glb",
    "tp4066-4-2v-dfn228.step",
    "tp4066-4-2v-dfn228.lbr",
    "docs/hero.png",
    "docs/tp4066-4-2v-dfn228-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tp4066-4-2v-dfn228-hero.glb",
    "tp4066-4-2v-dfn228-hero.overlay.json",
    "tp4066-4-2v-dfn228-etched.glb"
  ],
  "component": {
    "mpn": "TP4066-4.2V-DFN228",
    "manufacturer": "TOPPOWER(Nanjing Extension Microelectronics)",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/fb2d859a0f13ff60d920823f32c0de04.pdf",
    "parts": {
      "symbol": "tp4066-4-2v-dfn228.kicad_sym",
      "footprint": "tp4066-4-2v-dfn228.kicad_mod",
      "model_3d": "tp4066-4-2v-dfn228-hero.glb",
      "model_3d_plain": "tp4066-4-2v-dfn228-etched.glb",
      "model_3d_step": "tp4066-4-2v-dfn228-etched.step",
      "model_3d_step_plain": "tp4066-4-2v-dfn228.step",
      "lbr": "tp4066-4-2v-dfn228.lbr"
    },
    "distributor_links": {
      "lcsc": "C41413023"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T03:37:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TEMP",
        "type": "input",
        "description": "Temperature sense input connected to the battery NTC; charging is suspended if TEMP is below 45% or above 80% of VIN, and the function is disabled by grounding TEMP."
      },
      {
        "number": "2",
        "name": "PROG",
        "type": "passive",
        "description": "Sets the constant charge current via a resistor RPROG to GND, with the pin regulated to 1V in constant current mode and 0.2V in precharge mode."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input supply voltage; the operating range is 4.35V to 12.0V, and the chip enters sleep mode when VCC drops to within 50mV of the BAT pin voltage."
      },
      {
        "number": "5",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery connection that supplies charge current to the battery and provides the 4.2V regulation voltage; it draws less than 1uA in shutdown or sleep mode."
      },
      {
        "number": "6",
        "name": "STDBY",
        "type": "output",
        "description": "Open-drain charge termination status output that is pulled low when charging is terminated and is otherwise high impedance."
      },
      {
        "number": "7",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that is pulled low while the battery is being charged and is otherwise high impedance."
      },
      {
        "number": "8",
        "name": "CE",
        "type": "input",
        "description": "Chip enable input where a high level enables normal operation and a low level puts the device into disable mode; it can be driven by TTL or CMOS logic levels."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the DFN2*2-8 ordering diagram on page 2 (top row TEMP/PROG/GND/VCC = pins 1-4, bot"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0222,
        "at": "2026-11-10T03:37:34"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/fb2d859a0f13ff60d920823f32c0de04.pdf",
        "pages": 15,
        "sha256": "3bf04897aaa9e7ef",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tp4066-4-2v-dfn228.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "914cd301aa2efff54a7c18fe40fe21c25b277d6109b6cb10afb266387128ddd0",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tp4066-4-2v-dfn228-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "560466095de92c5aab9be53dfff2ddbe361690e30d85dfbf31582f551c2035a5",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}