main
Ray Initial commit: component/tms320f28069fpnt 08e9d6a

TMS320F28069FPNT

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-80(12x12)

TMS320F28069FPNT from Texas Instruments, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO23/EQEP1I/MFSXA/SCIRXDB bidirectional General-purpose I/O 23; alternate functions: eQEP1 index I/O, McBSP transmit frame sync I/O, SCI-B receive input; internal pullup enabled at reset.
2 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
3 VSS power_in Digital ground reference pin.
4 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
5 GPIO20/EQEP1A/MDXA/COMP1OUT bidirectional General-purpose I/O 20; alternate functions: eQEP1 input A, McBSP transmit serial data output, Comparator 1 direct output; internal pullup enabled at reset.
6 GPIO21/EQEP1B/MDRA/COMP2OUT bidirectional General-purpose I/O 21; alternate functions: eQEP1 input B, McBSP receive serial data input, Comparator 2 direct output; internal pullup enabled at reset.
7 GPIO4/EPWM3A bidirectional General-purpose I/O 4; alternate function: ePWM3 output A with HRPWM channel; pullup not enabled at reset.
8 GPIO5/EPWM3B/SPISIMOA/ECAP1 bidirectional General-purpose I/O 5; alternate functions: ePWM3 output B, SPI-A slave in/master out I/O, eCAP1 input/output; pullup not enabled at reset.
9 XRS bidirectional Device reset input and watchdog reset open-drain output; driven low by device during POR/BOR or watchdog reset (512 OSCCLK cycles); requires 2.2-kΩ to 10-kΩ pullup resistor to VDDIO; internal pullup.
10 TRST input JTAG test reset with internal pulldown; active-high: driven high grants scan system control; must be held low during normal operation with external 2.2-kΩ pulldown resistor.
11 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
12 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
13 VSS power_in Digital ground reference pin.
14 ADCINA6/COMP3A/AIO6 input ADC group A channel 6 analog input (0 V to 3.3 V fixed range); alternate: Comparator 3A input, Digital AIO6 bidirectional; no internal pullup on AIO pins.
15 ADCINA5 input ADC group A channel 5 analog input (0 V to 3.3 V fixed range, 12-bit, up to 3.46 MSPS).
16 ADCINA4/COMP2A/AIO4 input ADC group A channel 4 analog input (0 V to 3.3 V fixed range); alternate: Comparator 2A input, Digital AIO4 bidirectional; no internal pullup on AIO pins.
17 ADCINA2/COMP1A/AIO2 input ADC group A channel 2 analog input (0 V to 3.3 V fixed range); alternate: Comparator 1A input, Digital AIO2 bidirectional; no internal pullup on AIO pins.
18 ADCINA1 input ADC group A channel 1 analog input (0 V to 3.3 V fixed range).
19 ADCINA0/VREFHI passive ADC group A channel 0 input and ADC external reference high (for ratiometric mode) share this pin on the 80-pin PN package; their use is mutually exclusive.
20 VDDA power_in Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin.
21 VREFLO/VSSA power_in ADC external reference low and analog ground; VREFLO is always connected to VSSA on the 80-pin PN package.
22 ADCINB0 input ADC group B channel 0 analog input (0 V to 3.3 V fixed range).
23 ADCINB1 input ADC group B channel 1 analog input (0 V to 3.3 V fixed range).
24 ADCINB2/COMP1B/AIO10 input ADC group B channel 2 analog input (0 V to 3.3 V); alternate: Comparator 1B input, Digital AIO10 bidirectional; no internal pullup on AIO pins.
25 ADCINB4/COMP2B/AIO12 input ADC group B channel 4 analog input (0 V to 3.3 V); alternate: Comparator 2B input, Digital AIO12 bidirectional; no internal pullup on AIO pins.
26 ADCINB5 input ADC group B channel 5 analog input (0 V to 3.3 V fixed range).
27 ADCINB6/COMP3B/AIO14 input ADC group B channel 6 analog input (0 V to 3.3 V); alternate: Comparator 3B input, Digital AIO14 bidirectional; no internal pullup on AIO pins.
28 VSS power_in Digital ground reference pin.
29 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
30 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
31 GPIO25/ECAP2/EQEP2B/SPISOMIB bidirectional General-purpose I/O 25; alternate functions: eCAP2 I/O, eQEP2 input B (PZ/PZP packages only), SPI-B slave out/master in; internal pullup enabled at reset.
32 GPIO31/CANTXA/EQEP2S/EPWM8A bidirectional General-purpose I/O 31; alternate functions: CAN transmit output, eQEP2 strobe (PZ/PZP packages only), ePWM8 output A with HRPWM; internal pullup enabled at reset.
33 GPIO30/CANRXA/EQEP2I/EPWM7A bidirectional General-purpose I/O 30; alternate functions: CAN receive input, eQEP2 index I/O (PZ/PZP packages only), ePWM7 output A with HRPWM; internal pullup enabled at reset.
34 GPIO29/SCITXDA/SCLA/TZ3 bidirectional General-purpose I/O 29; alternate functions: SCI-A transmit output, I2C clock open-drain I/O, Trip Zone input 3; internal pullup enabled at reset.
35 GPIO12/TZ1/SCITXDA/SPISIMOB bidirectional General-purpose I/O 12; alternate functions: Trip Zone input 1, SCI-A transmit output, SPI-B slave in/master out; internal pullup enabled at reset.
36 TEST2 unconnected Test pin reserved for TI; must be left unconnected.
37 VDD3VFL power_in 3.3-V Flash core power pin; must be connected to 3.3 V at all times.
38 VSS power_in Digital ground reference pin.
39 GPIO9/EPWM5B/SCITXDB/ECAP3 bidirectional General-purpose I/O 9; alternate functions: ePWM5 output B, SCI-B transmit output, eCAP3 I/O; pullup not enabled at reset.
40 GPIO28/SCIRXDA/SDAA/TZ2 bidirectional General-purpose I/O 28; alternate functions: SCI-A receive input, I2C data open-drain bidirectional, Trip Zone input 2; internal pullup enabled at reset.
41 GPIO18/SPICLKA/SCITXDB/XCLKOUT bidirectional General-purpose I/O 18; alternate functions: SPI-A clock I/O, SCI-B transmit output, XCLKOUT (SYSCLKOUT/1, /2, or /4; default /4 at reset; tri-state when disabled via XCLKOUTDIV=3); internal pullup enabled.
42 GPIO17/SPISOMIA/TZ3 bidirectional General-purpose I/O 17; alternate functions: SPI-A slave out/master in I/O, Trip Zone input 3; internal pullup enabled at reset.
43 GPIO8/EPWM5A/ADCSOCAO bidirectional General-purpose I/O 8; alternate functions: ePWM5 output A with HRPWM, ADC start-of-conversion A output; pullup not enabled at reset.
44 GPIO16/SPISIMOA/TZ2 bidirectional General-purpose I/O 16; alternate functions: SPI-A slave in/master out I/O, Trip Zone input 2; internal pullup enabled at reset.
45 GPIO7/EPWM4B/SCIRXDA/ECAP2 bidirectional General-purpose I/O 7; alternate functions: ePWM4 output B, SCI-A receive input, eCAP2 I/O; pullup not enabled at reset.
46 GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO bidirectional General-purpose I/O 6; alternate functions: ePWM4 output A with HRPWM, external ePWM sync pulse input, external ePWM sync pulse output; pullup not enabled at reset.
47 X2 output On-chip crystal oscillator output; connect a quartz crystal or ceramic resonator between X1 and X2; leave unconnected if crystal oscillator is not used.
48 X1 input On-chip 1.8-V crystal oscillator input; connect a quartz crystal or resonator between X1 and X2; tie to GND if not used.
49 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
50 VSS power_in Digital ground reference pin.
51 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
52 GPIO19/XCLKIN/SPISTEA/SCIRXDB/ECAP1 bidirectional General-purpose I/O 19; XCLKIN path from this pin to the clock block is not gated by the mux; alternate: SPI-A slave transmit enable I/O, SCI-B receive input, eCAP1 I/O; may glitch during power-up when on-chip VREG is used.
53 GPIO39 bidirectional General-purpose I/O 39; no peripheral alternate functions defined; internal pullup enabled at reset.
54 GPIO38/XCLKIN/TCK bidirectional General-purpose I/O 38; alternate functions: external clock input (XCLKIN, default source via XCLKINSEL bit), JTAG test clock (TCK) with internal pullup; may glitch during power-up when on-chip VREG is used.
55 GPIO34/COMP2OUT/COMP3OUT bidirectional General-purpose I/O 34; alternate functions: Comparator 2 direct output, Comparator 3 direct output; may glitch during power-up when on-chip VREG is used.
56 GPIO37/TDO bidirectional General-purpose I/O 37; alternate function: JTAG scan-out test data output (TDO), contents shifted out on falling edge of TCK with 8-mA drive; may glitch during power-up when on-chip VREG is used.
57 GPIO35/TDI bidirectional General-purpose I/O 35; alternate function: JTAG test data input (TDI) with internal pullup, clocked into selected register on rising edge of TCK; may glitch during power-up when on-chip VREG is used.
58 GPIO36/TMS bidirectional General-purpose I/O 36; alternate function: JTAG test-mode select (TMS) with internal pullup, serial control input clocked into TAP controller on rising edge of TCK; may glitch during power-up when on-chip VREG is used.
59 GPIO11/EPWM6B/SCIRXDB/ECAP1 bidirectional General-purpose I/O 11; alternate functions: ePWM6 output B, SCI-B receive input, eCAP1 I/O; pullup not enabled at reset.
60 GPIO10/EPWM6A/ADCSOCBO bidirectional General-purpose I/O 10; alternate functions: ePWM6 output A with HRPWM, ADC start-of-conversion B output; pullup not enabled at reset.
61 GPIO27/HRCAP2/SPISTEB/USB0DM bidirectional General-purpose I/O 27; alternate functions: HRCAP2 input, SPI-B slave transmit enable I/O, USB0 negative differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used.
62 GPIO26/ECAP3/SPICLKB/USB0DP bidirectional General-purpose I/O 26; alternate functions: eCAP3 I/O, SPI-B clock I/O, USB0 positive differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used.
63 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
64 VSS power_in Digital ground reference pin.
65 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
66 GPIO3/EPWM2B/SPISOMIA/COMP2OUT bidirectional General-purpose I/O 3; alternate functions: ePWM2 output B, SPI-A slave out/master in I/O, Comparator 2 direct output; pullup not enabled at reset.
67 GPIO2/EPWM2A bidirectional General-purpose I/O 2; alternate function: ePWM2 output A with HRPWM channel; pullup not enabled at reset.
68 GPIO1/EPWM1B/COMP1OUT bidirectional General-purpose I/O 1; alternate functions: ePWM1 output B, Comparator 1 direct output; pullup not enabled at reset.
69 GPIO0/EPWM1A bidirectional General-purpose I/O 0; alternate function: ePWM1 output A with HRPWM channel; pullup not enabled at reset.
70 GPIO15/ECAP2/SCIRXDB/SPISTEB bidirectional General-purpose I/O 15; alternate functions: eCAP2 I/O, SCI-B receive input, SPI-B slave transmit enable I/O; internal pullup enabled at reset.
71 VREGENZ input Internal voltage regulator enable with internal pulldown; tie low (to VSS) to enable internal 1.8-V VREG; tie high (to VDDIO) to disable VREG and use an external 1.8-V supply.
72 VDD power_in 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground.
73 VSS power_in Digital ground reference pin.
74 VDDIO power_in 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin.
75 GPIO13/TZ2/SPISOMIB bidirectional General-purpose I/O 13; alternate functions: Trip Zone input 2, SPI-B slave out/master in I/O; internal pullup enabled at reset.
76 GPIO14/TZ3/SCITXDB/SPICLKB bidirectional General-purpose I/O 14; alternate functions: Trip Zone input 3, SCI-B transmit output, SPI-B clock I/O; internal pullup enabled at reset.
77 GPIO24/ECAP1/EQEP2A/SPISIMOB bidirectional General-purpose I/O 24; alternate functions: eCAP1 I/O, eQEP2 input A (PZ/PZP packages only), SPI-B slave in/master out I/O; internal pullup enabled at reset.
78 GPIO22/EQEP1S/MCLKXA/SCITXDB bidirectional General-purpose I/O 22; alternate functions: eQEP1 strobe I/O, McBSP transmit clock I/O, SCI-B transmit output; internal pullup enabled at reset.
79 GPIO32/SDAA/EPWMSYNCI/ADCSOCAO bidirectional General-purpose I/O 32; alternate functions: I2C data open-drain bidirectional, ePWM external sync pulse input, ADC start-of-conversion A output; internal pullup enabled at reset.
80 GPIO33/SCLA/EPWMSYNCO/ADCSOCBO bidirectional General-purpose I/O 33; alternate functions: I2C clock open-drain bidirectional, ePWM external sync pulse output, ADC start-of-conversion B output; internal pullup enabled at reset.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-80(12x12)
Category Embedded Processors & Controllers
Pins 80

CAD (KiCad official)

  • Symbol: TMS320F28069FPNT
  • Footprint: Package_QFP:LQFP-80_12x12mm_P0.5mm
  • 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
  • 3D model files: tms320f28069fpnt-etched.step / tms320f28069fpnt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tms320f28069fpnt.step / tms320f28069fpnt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (206 pp, sha256 3033efed856fc72a, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF