component
TMS320F28069FPNT
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+117@@ -0,0 +1,117 @@+# TMS320F28069FPNT++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-80(12x12)++TMS320F28069FPNT from Texas Instruments, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GPIO23/EQEP1I/MFSXA/SCIRXDB | bidirectional | General-purpose I/O 23; alternate functions: eQEP1 index I/O, McBSP transmit frame sync I/O, SCI-B receive input; internal pullup enabled at reset. |+| 2 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 3 | VSS | power_in | Digital ground reference pin. |+| 4 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 5 | GPIO20/EQEP1A/MDXA/COMP1OUT | bidirectional | General-purpose I/O 20; alternate functions: eQEP1 input A, McBSP transmit serial data output, Comparator 1 direct output; internal pullup enabled at reset. |+| 6 | GPIO21/EQEP1B/MDRA/COMP2OUT | bidirectional | General-purpose I/O 21; alternate functions: eQEP1 input B, McBSP receive serial data input, Comparator 2 direct output; internal pullup enabled at reset. |+| 7 | GPIO4/EPWM3A | bidirectional | General-purpose I/O 4; alternate function: ePWM3 output A with HRPWM channel; pullup not enabled at reset. |+| 8 | GPIO5/EPWM3B/SPISIMOA/ECAP1 | bidirectional | General-purpose I/O 5; alternate functions: ePWM3 output B, SPI-A slave in/master out I/O, eCAP1 input/output; pullup not enabled at reset. |+| 9 | XRS | bidirectional | Device reset input and watchdog reset open-drain output; driven low by device during POR/BOR or watchdog reset (512 OSCCLK cycles); requires 2.2-kΩ to 10-kΩ pullup resistor to VDDIO; internal pullup. |+| 10 | TRST | input | JTAG test reset with internal pulldown; active-high: driven high grants scan system control; must be held low during normal operation with external 2.2-kΩ pulldown resistor. |+| 11 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 12 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 13 | VSS | power_in | Digital ground reference pin. |+| 14 | ADCINA6/COMP3A/AIO6 | input | ADC group A channel 6 analog input (0 V to 3.3 V fixed range); alternate: Comparator 3A input, Digital AIO6 bidirectional; no internal pullup on AIO pins. |+| 15 | ADCINA5 | input | ADC group A channel 5 analog input (0 V to 3.3 V fixed range, 12-bit, up to 3.46 MSPS). |+| 16 | ADCINA4/COMP2A/AIO4 | input | ADC group A channel 4 analog input (0 V to 3.3 V fixed range); alternate: Comparator 2A input, Digital AIO4 bidirectional; no internal pullup on AIO pins. |+| 17 | ADCINA2/COMP1A/AIO2 | input | ADC group A channel 2 analog input (0 V to 3.3 V fixed range); alternate: Comparator 1A input, Digital AIO2 bidirectional; no internal pullup on AIO pins. |+| 18 | ADCINA1 | input | ADC group A channel 1 analog input (0 V to 3.3 V fixed range). |+| 19 | ADCINA0/VREFHI | passive | ADC group A channel 0 input and ADC external reference high (for ratiometric mode) share this pin on the 80-pin PN package; their use is mutually exclusive. |+| 20 | VDDA | power_in | Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin. |+| 21 | VREFLO/VSSA | power_in | ADC external reference low and analog ground; VREFLO is always connected to VSSA on the 80-pin PN package. |+| 22 | ADCINB0 | input | ADC group B channel 0 analog input (0 V to 3.3 V fixed range). |+| 23 | ADCINB1 | input | ADC group B channel 1 analog input (0 V to 3.3 V fixed range). |+| 24 | ADCINB2/COMP1B/AIO10 | input | ADC group B channel 2 analog input (0 V to 3.3 V); alternate: Comparator 1B input, Digital AIO10 bidirectional; no internal pullup on AIO pins. |+| 25 | ADCINB4/COMP2B/AIO12 | input | ADC group B channel 4 analog input (0 V to 3.3 V); alternate: Comparator 2B input, Digital AIO12 bidirectional; no internal pullup on AIO pins. |+| 26 | ADCINB5 | input | ADC group B channel 5 analog input (0 V to 3.3 V fixed range). |+| 27 | ADCINB6/COMP3B/AIO14 | input | ADC group B channel 6 analog input (0 V to 3.3 V); alternate: Comparator 3B input, Digital AIO14 bidirectional; no internal pullup on AIO pins. |+| 28 | VSS | power_in | Digital ground reference pin. |+| 29 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 30 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 31 | GPIO25/ECAP2/EQEP2B/SPISOMIB | bidirectional | General-purpose I/O 25; alternate functions: eCAP2 I/O, eQEP2 input B (PZ/PZP packages only), SPI-B slave out/master in; internal pullup enabled at reset. |+| 32 | GPIO31/CANTXA/EQEP2S/EPWM8A | bidirectional | General-purpose I/O 31; alternate functions: CAN transmit output, eQEP2 strobe (PZ/PZP packages only), ePWM8 output A with HRPWM; internal pullup enabled at reset. |+| 33 | GPIO30/CANRXA/EQEP2I/EPWM7A | bidirectional | General-purpose I/O 30; alternate functions: CAN receive input, eQEP2 index I/O (PZ/PZP packages only), ePWM7 output A with HRPWM; internal pullup enabled at reset. |+| 34 | GPIO29/SCITXDA/SCLA/TZ3 | bidirectional | General-purpose I/O 29; alternate functions: SCI-A transmit output, I2C clock open-drain I/O, Trip Zone input 3; internal pullup enabled at reset. |+| 35 | GPIO12/TZ1/SCITXDA/SPISIMOB | bidirectional | General-purpose I/O 12; alternate functions: Trip Zone input 1, SCI-A transmit output, SPI-B slave in/master out; internal pullup enabled at reset. |+| 36 | TEST2 | unconnected | Test pin reserved for TI; must be left unconnected. |+| 37 | VDD3VFL | power_in | 3.3-V Flash core power pin; must be connected to 3.3 V at all times. |+| 38 | VSS | power_in | Digital ground reference pin. |+| 39 | GPIO9/EPWM5B/SCITXDB/ECAP3 | bidirectional | General-purpose I/O 9; alternate functions: ePWM5 output B, SCI-B transmit output, eCAP3 I/O; pullup not enabled at reset. |+| 40 | GPIO28/SCIRXDA/SDAA/TZ2 | bidirectional | General-purpose I/O 28; alternate functions: SCI-A receive input, I2C data open-drain bidirectional, Trip Zone input 2; internal pullup enabled at reset. |+| 41 | GPIO18/SPICLKA/SCITXDB/XCLKOUT | bidirectional | General-purpose I/O 18; alternate functions: SPI-A clock I/O, SCI-B transmit output, XCLKOUT (SYSCLKOUT/1, /2, or /4; default /4 at reset; tri-state when disabled via XCLKOUTDIV=3); internal pullup enabled. |+| 42 | GPIO17/SPISOMIA/TZ3 | bidirectional | General-purpose I/O 17; alternate functions: SPI-A slave out/master in I/O, Trip Zone input 3; internal pullup enabled at reset. |+| 43 | GPIO8/EPWM5A/ADCSOCAO | bidirectional | General-purpose I/O 8; alternate functions: ePWM5 output A with HRPWM, ADC start-of-conversion A output; pullup not enabled at reset. |+| 44 | GPIO16/SPISIMOA/TZ2 | bidirectional | General-purpose I/O 16; alternate functions: SPI-A slave in/master out I/O, Trip Zone input 2; internal pullup enabled at reset. |+| 45 | GPIO7/EPWM4B/SCIRXDA/ECAP2 | bidirectional | General-purpose I/O 7; alternate functions: ePWM4 output B, SCI-A receive input, eCAP2 I/O; pullup not enabled at reset. |+| 46 | GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO | bidirectional | General-purpose I/O 6; alternate functions: ePWM4 output A with HRPWM, external ePWM sync pulse input, external ePWM sync pulse output; pullup not enabled at reset. |+| 47 | X2 | output | On-chip crystal oscillator output; connect a quartz crystal or ceramic resonator between X1 and X2; leave unconnected if crystal oscillator is not used. |+| 48 | X1 | input | On-chip 1.8-V crystal oscillator input; connect a quartz crystal or resonator between X1 and X2; tie to GND if not used. |+| 49 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 50 | VSS | power_in | Digital ground reference pin. |+| 51 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 52 | GPIO19/XCLKIN/SPISTEA/SCIRXDB/ECAP1 | bidirectional | General-purpose I/O 19; XCLKIN path from this pin to the clock block is not gated by the mux; alternate: SPI-A slave transmit enable I/O, SCI-B receive input, eCAP1 I/O; may glitch during power-up when on-chip VREG is used. |+| 53 | GPIO39 | bidirectional | General-purpose I/O 39; no peripheral alternate functions defined; internal pullup enabled at reset. |+| 54 | GPIO38/XCLKIN/TCK | bidirectional | General-purpose I/O 38; alternate functions: external clock input (XCLKIN, default source via XCLKINSEL bit), JTAG test clock (TCK) with internal pullup; may glitch during power-up when on-chip VREG is used. |+| 55 | GPIO34/COMP2OUT/COMP3OUT | bidirectional | General-purpose I/O 34; alternate functions: Comparator 2 direct output, Comparator 3 direct output; may glitch during power-up when on-chip VREG is used. |+| 56 | GPIO37/TDO | bidirectional | General-purpose I/O 37; alternate function: JTAG scan-out test data output (TDO), contents shifted out on falling edge of TCK with 8-mA drive; may glitch during power-up when on-chip VREG is used. |+| 57 | GPIO35/TDI | bidirectional | General-purpose I/O 35; alternate function: JTAG test data input (TDI) with internal pullup, clocked into selected register on rising edge of TCK; may glitch during power-up when on-chip VREG is used. |+| 58 | GPIO36/TMS | bidirectional | General-purpose I/O 36; alternate function: JTAG test-mode select (TMS) with internal pullup, serial control input clocked into TAP controller on rising edge of TCK; may glitch during power-up when on-chip VREG is used. |+| 59 | GPIO11/EPWM6B/SCIRXDB/ECAP1 | bidirectional | General-purpose I/O 11; alternate functions: ePWM6 output B, SCI-B receive input, eCAP1 I/O; pullup not enabled at reset. |+| 60 | GPIO10/EPWM6A/ADCSOCBO | bidirectional | General-purpose I/O 10; alternate functions: ePWM6 output A with HRPWM, ADC start-of-conversion B output; pullup not enabled at reset. |+| 61 | GPIO27/HRCAP2/SPISTEB/USB0DM | bidirectional | General-purpose I/O 27; alternate functions: HRCAP2 input, SPI-B slave transmit enable I/O, USB0 negative differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used. |+| 62 | GPIO26/ECAP3/SPICLKB/USB0DP | bidirectional | General-purpose I/O 26; alternate functions: eCAP3 I/O, SPI-B clock I/O, USB0 positive differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used. |+| 63 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 64 | VSS | power_in | Digital ground reference pin. |+| 65 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 66 | GPIO3/EPWM2B/SPISOMIA/COMP2OUT | bidirectional | General-purpose I/O 3; alternate functions: ePWM2 output B, SPI-A slave out/master in I/O, Comparator 2 direct output; pullup not enabled at reset. |+| 67 | GPIO2/EPWM2A | bidirectional | General-purpose I/O 2; alternate function: ePWM2 output A with HRPWM channel; pullup not enabled at reset. |+| 68 | GPIO1/EPWM1B/COMP1OUT | bidirectional | General-purpose I/O 1; alternate functions: ePWM1 output B, Comparator 1 direct output; pullup not enabled at reset. |+| 69 | GPIO0/EPWM1A | bidirectional | General-purpose I/O 0; alternate function: ePWM1 output A with HRPWM channel; pullup not enabled at reset. |+| 70 | GPIO15/ECAP2/SCIRXDB/SPISTEB | bidirectional | General-purpose I/O 15; alternate functions: eCAP2 I/O, SCI-B receive input, SPI-B slave transmit enable I/O; internal pullup enabled at reset. |+| 71 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie low (to VSS) to enable internal 1.8-V VREG; tie high (to VDDIO) to disable VREG and use an external 1.8-V supply. |+| 72 | VDD | power_in | 1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground. |+| 73 | VSS | power_in | Digital ground reference pin. |+| 74 | VDDIO | power_in | 3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin. |+| 75 | GPIO13/TZ2/SPISOMIB | bidirectional | General-purpose I/O 13; alternate functions: Trip Zone input 2, SPI-B slave out/master in I/O; internal pullup enabled at reset. |+| 76 | GPIO14/TZ3/SCITXDB/SPICLKB | bidirectional | General-purpose I/O 14; alternate functions: Trip Zone input 3, SCI-B transmit output, SPI-B clock I/O; internal pullup enabled at reset. |+| 77 | GPIO24/ECAP1/EQEP2A/SPISIMOB | bidirectional | General-purpose I/O 24; alternate functions: eCAP1 I/O, eQEP2 input A (PZ/PZP packages only), SPI-B slave in/master out I/O; internal pullup enabled at reset. |+| 78 | GPIO22/EQEP1S/MCLKXA/SCITXDB | bidirectional | General-purpose I/O 22; alternate functions: eQEP1 strobe I/O, McBSP transmit clock I/O, SCI-B transmit output; internal pullup enabled at reset. |+| 79 | GPIO32/SDAA/EPWMSYNCI/ADCSOCAO | bidirectional | General-purpose I/O 32; alternate functions: I2C data open-drain bidirectional, ePWM external sync pulse input, ADC start-of-conversion A output; internal pullup enabled at reset. |+| 80 | GPIO33/SCLA/EPWMSYNCO/ADCSOCBO | bidirectional | General-purpose I/O 33; alternate functions: I2C clock open-drain bidirectional, ePWM external sync pulse output, ADC start-of-conversion B output; internal pullup enabled at reset. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | LQFP-80(12x12) |+| Category | Embedded Processors & Controllers |+| Pins | 80 |++## CAD (KiCad official)++- Symbol: `TMS320F28069FPNT`+- Footprint: `Package_QFP:LQFP-80_12x12mm_P0.5mm`+- 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)+- 3D model files: `tms320f28069fpnt-etched.step` / `tms320f28069fpnt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tms320f28069fpnt.step` / `tms320f28069fpnt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tms320f28062f) (206 pp, sha256 `3033efed856fc72a`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tms320f28069fpnt-datasheet.pdf)
page.jsonadded+589@@ -0,0 +1,589 @@+{+ "slug": "tms320f28069fpnt",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "tms320f28069fpnt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tms320f28069fpnt.kicad_sym",+ "tms320f28069fpnt.kicad_mod",+ "tms320f28069fpnt.glb",+ "tms320f28069fpnt.step",+ "tms320f28069fpnt.lbr",+ "docs/hero.png",+ "docs/tms320f28069fpnt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TMS320F28069FPNT",+ "manufacturer": "Texas Instruments",+ "package": "LQFP-80(12x12)",+ "pin_count": 80,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tms320f28062f",+ "parts": {+ "symbol": "tms320f28069fpnt.kicad_sym",+ "footprint": "tms320f28069fpnt.kicad_mod",+ "model_3d": "tms320f28069fpnt-etched.glb",+ "model_3d_plain": "tms320f28069fpnt.glb",+ "model_3d_step": "tms320f28069fpnt-etched.step",+ "model_3d_step_plain": "tms320f28069fpnt.step",+ "lbr": "tms320f28069fpnt.lbr"+ },+ "distributor_links": {+ "lcsc": "C1338906",+ "digikey": "296-41094-ND",+ "mouser": "595-TMS320F28069FPNT"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T03:50:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-41094-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TMS320F28069FPNT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GPIO23/EQEP1I/MFSXA/SCIRXDB",+ "type": "bidirectional",+ "description": "General-purpose I/O 23; alternate functions: eQEP1 index I/O, McBSP transmit frame sync I/O, SCI-B receive input; internal pullup enabled at reset."+ },+ {+ "number": "2",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "3",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "4",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "5",+ "name": "GPIO20/EQEP1A/MDXA/COMP1OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 20; alternate functions: eQEP1 input A, McBSP transmit serial data output, Comparator 1 direct output; internal pullup enabled at reset."+ },+ {+ "number": "6",+ "name": "GPIO21/EQEP1B/MDRA/COMP2OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 21; alternate functions: eQEP1 input B, McBSP receive serial data input, Comparator 2 direct output; internal pullup enabled at reset."+ },+ {+ "number": "7",+ "name": "GPIO4/EPWM3A",+ "type": "bidirectional",+ "description": "General-purpose I/O 4; alternate function: ePWM3 output A with HRPWM channel; pullup not enabled at reset."+ },+ {+ "number": "8",+ "name": "GPIO5/EPWM3B/SPISIMOA/ECAP1",+ "type": "bidirectional",+ "description": "General-purpose I/O 5; alternate functions: ePWM3 output B, SPI-A slave in/master out I/O, eCAP1 input/output; pullup not enabled at reset."+ },+ {+ "number": "9",+ "name": "XRS",+ "type": "bidirectional",+ "description": "Device reset input and watchdog reset open-drain output; driven low by device during POR/BOR or watchdog reset (512 OSCCLK cycles); requires 2.2-kΩ to 10-kΩ pullup resistor to VDDIO; internal pullup."+ },+ {+ "number": "10",+ "name": "TRST",+ "type": "input",+ "description": "JTAG test reset with internal pulldown; active-high: driven high grants scan system control; must be held low during normal operation with external 2.2-kΩ pulldown resistor."+ },+ {+ "number": "11",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "12",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "13",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "14",+ "name": "ADCINA6/COMP3A/AIO6",+ "type": "input",+ "description": "ADC group A channel 6 analog input (0 V to 3.3 V fixed range); alternate: Comparator 3A input, Digital AIO6 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "15",+ "name": "ADCINA5",+ "type": "input",+ "description": "ADC group A channel 5 analog input (0 V to 3.3 V fixed range, 12-bit, up to 3.46 MSPS)."+ },+ {+ "number": "16",+ "name": "ADCINA4/COMP2A/AIO4",+ "type": "input",+ "description": "ADC group A channel 4 analog input (0 V to 3.3 V fixed range); alternate: Comparator 2A input, Digital AIO4 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "17",+ "name": "ADCINA2/COMP1A/AIO2",+ "type": "input",+ "description": "ADC group A channel 2 analog input (0 V to 3.3 V fixed range); alternate: Comparator 1A input, Digital AIO2 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "18",+ "name": "ADCINA1",+ "type": "input",+ "description": "ADC group A channel 1 analog input (0 V to 3.3 V fixed range)."+ },+ {+ "number": "19",+ "name": "ADCINA0/VREFHI",+ "type": "passive",+ "description": "ADC group A channel 0 input and ADC external reference high (for ratiometric mode) share this pin on the 80-pin PN package; their use is mutually exclusive."+ },+ {+ "number": "20",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin."+ },+ {+ "number": "21",+ "name": "VREFLO/VSSA",+ "type": "power_in",+ "description": "ADC external reference low and analog ground; VREFLO is always connected to VSSA on the 80-pin PN package."+ },+ {+ "number": "22",+ "name": "ADCINB0",+ "type": "input",+ "description": "ADC group B channel 0 analog input (0 V to 3.3 V fixed range)."+ },+ {+ "number": "23",+ "name": "ADCINB1",+ "type": "input",+ "description": "ADC group B channel 1 analog input (0 V to 3.3 V fixed range)."+ },+ {+ "number": "24",+ "name": "ADCINB2/COMP1B/AIO10",+ "type": "input",+ "description": "ADC group B channel 2 analog input (0 V to 3.3 V); alternate: Comparator 1B input, Digital AIO10 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "25",+ "name": "ADCINB4/COMP2B/AIO12",+ "type": "input",+ "description": "ADC group B channel 4 analog input (0 V to 3.3 V); alternate: Comparator 2B input, Digital AIO12 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "26",+ "name": "ADCINB5",+ "type": "input",+ "description": "ADC group B channel 5 analog input (0 V to 3.3 V fixed range)."+ },+ {+ "number": "27",+ "name": "ADCINB6/COMP3B/AIO14",+ "type": "input",+ "description": "ADC group B channel 6 analog input (0 V to 3.3 V); alternate: Comparator 3B input, Digital AIO14 bidirectional; no internal pullup on AIO pins."+ },+ {+ "number": "28",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "29",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "30",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "31",+ "name": "GPIO25/ECAP2/EQEP2B/SPISOMIB",+ "type": "bidirectional",+ "description": "General-purpose I/O 25; alternate functions: eCAP2 I/O, eQEP2 input B (PZ/PZP packages only), SPI-B slave out/master in; internal pullup enabled at reset."+ },+ {+ "number": "32",+ "name": "GPIO31/CANTXA/EQEP2S/EPWM8A",+ "type": "bidirectional",+ "description": "General-purpose I/O 31; alternate functions: CAN transmit output, eQEP2 strobe (PZ/PZP packages only), ePWM8 output A with HRPWM; internal pullup enabled at reset."+ },+ {+ "number": "33",+ "name": "GPIO30/CANRXA/EQEP2I/EPWM7A",+ "type": "bidirectional",+ "description": "General-purpose I/O 30; alternate functions: CAN receive input, eQEP2 index I/O (PZ/PZP packages only), ePWM7 output A with HRPWM; internal pullup enabled at reset."+ },+ {+ "number": "34",+ "name": "GPIO29/SCITXDA/SCLA/TZ3",+ "type": "bidirectional",+ "description": "General-purpose I/O 29; alternate functions: SCI-A transmit output, I2C clock open-drain I/O, Trip Zone input 3; internal pullup enabled at reset."+ },+ {+ "number": "35",+ "name": "GPIO12/TZ1/SCITXDA/SPISIMOB",+ "type": "bidirectional",+ "description": "General-purpose I/O 12; alternate functions: Trip Zone input 1, SCI-A transmit output, SPI-B slave in/master out; internal pullup enabled at reset."+ },+ {+ "number": "36",+ "name": "TEST2",+ "type": "unconnected",+ "description": "Test pin reserved for TI; must be left unconnected."+ },+ {+ "number": "37",+ "name": "VDD3VFL",+ "type": "power_in",+ "description": "3.3-V Flash core power pin; must be connected to 3.3 V at all times."+ },+ {+ "number": "38",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "39",+ "name": "GPIO9/EPWM5B/SCITXDB/ECAP3",+ "type": "bidirectional",+ "description": "General-purpose I/O 9; alternate functions: ePWM5 output B, SCI-B transmit output, eCAP3 I/O; pullup not enabled at reset."+ },+ {+ "number": "40",+ "name": "GPIO28/SCIRXDA/SDAA/TZ2",+ "type": "bidirectional",+ "description": "General-purpose I/O 28; alternate functions: SCI-A receive input, I2C data open-drain bidirectional, Trip Zone input 2; internal pullup enabled at reset."+ },+ {+ "number": "41",+ "name": "GPIO18/SPICLKA/SCITXDB/XCLKOUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 18; alternate functions: SPI-A clock I/O, SCI-B transmit output, XCLKOUT (SYSCLKOUT/1, /2, or /4; default /4 at reset; tri-state when disabled via XCLKOUTDIV=3); internal pullup enabled."+ },+ {+ "number": "42",+ "name": "GPIO17/SPISOMIA/TZ3",+ "type": "bidirectional",+ "description": "General-purpose I/O 17; alternate functions: SPI-A slave out/master in I/O, Trip Zone input 3; internal pullup enabled at reset."+ },+ {+ "number": "43",+ "name": "GPIO8/EPWM5A/ADCSOCAO",+ "type": "bidirectional",+ "description": "General-purpose I/O 8; alternate functions: ePWM5 output A with HRPWM, ADC start-of-conversion A output; pullup not enabled at reset."+ },+ {+ "number": "44",+ "name": "GPIO16/SPISIMOA/TZ2",+ "type": "bidirectional",+ "description": "General-purpose I/O 16; alternate functions: SPI-A slave in/master out I/O, Trip Zone input 2; internal pullup enabled at reset."+ },+ {+ "number": "45",+ "name": "GPIO7/EPWM4B/SCIRXDA/ECAP2",+ "type": "bidirectional",+ "description": "General-purpose I/O 7; alternate functions: ePWM4 output B, SCI-A receive input, eCAP2 I/O; pullup not enabled at reset."+ },+ {+ "number": "46",+ "name": "GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO",+ "type": "bidirectional",+ "description": "General-purpose I/O 6; alternate functions: ePWM4 output A with HRPWM, external ePWM sync pulse input, external ePWM sync pulse output; pullup not enabled at reset."+ },+ {+ "number": "47",+ "name": "X2",+ "type": "output",+ "description": "On-chip crystal oscillator output; connect a quartz crystal or ceramic resonator between X1 and X2; leave unconnected if crystal oscillator is not used."+ },+ {+ "number": "48",+ "name": "X1",+ "type": "input",+ "description": "On-chip 1.8-V crystal oscillator input; connect a quartz crystal or resonator between X1 and X2; tie to GND if not used."+ },+ {+ "number": "49",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "50",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "51",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "52",+ "name": "GPIO19/XCLKIN/SPISTEA/SCIRXDB/ECAP1",+ "type": "bidirectional",+ "description": "General-purpose I/O 19; XCLKIN path from this pin to the clock block is not gated by the mux; alternate: SPI-A slave transmit enable I/O, SCI-B receive input, eCAP1 I/O; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "53",+ "name": "GPIO39",+ "type": "bidirectional",+ "description": "General-purpose I/O 39; no peripheral alternate functions defined; internal pullup enabled at reset."+ },+ {+ "number": "54",+ "name": "GPIO38/XCLKIN/TCK",+ "type": "bidirectional",+ "description": "General-purpose I/O 38; alternate functions: external clock input (XCLKIN, default source via XCLKINSEL bit), JTAG test clock (TCK) with internal pullup; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "55",+ "name": "GPIO34/COMP2OUT/COMP3OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 34; alternate functions: Comparator 2 direct output, Comparator 3 direct output; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "56",+ "name": "GPIO37/TDO",+ "type": "bidirectional",+ "description": "General-purpose I/O 37; alternate function: JTAG scan-out test data output (TDO), contents shifted out on falling edge of TCK with 8-mA drive; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "57",+ "name": "GPIO35/TDI",+ "type": "bidirectional",+ "description": "General-purpose I/O 35; alternate function: JTAG test data input (TDI) with internal pullup, clocked into selected register on rising edge of TCK; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "58",+ "name": "GPIO36/TMS",+ "type": "bidirectional",+ "description": "General-purpose I/O 36; alternate function: JTAG test-mode select (TMS) with internal pullup, serial control input clocked into TAP controller on rising edge of TCK; may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "59",+ "name": "GPIO11/EPWM6B/SCIRXDB/ECAP1",+ "type": "bidirectional",+ "description": "General-purpose I/O 11; alternate functions: ePWM6 output B, SCI-B receive input, eCAP1 I/O; pullup not enabled at reset."+ },+ {+ "number": "60",+ "name": "GPIO10/EPWM6A/ADCSOCBO",+ "type": "bidirectional",+ "description": "General-purpose I/O 10; alternate functions: ePWM6 output A with HRPWM, ADC start-of-conversion B output; pullup not enabled at reset."+ },+ {+ "number": "61",+ "name": "GPIO27/HRCAP2/SPISTEB/USB0DM",+ "type": "bidirectional",+ "description": "General-purpose I/O 27; alternate functions: HRCAP2 input, SPI-B slave transmit enable I/O, USB0 negative differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "62",+ "name": "GPIO26/ECAP3/SPICLKB/USB0DP",+ "type": "bidirectional",+ "description": "General-purpose I/O 26; alternate functions: eCAP3 I/O, SPI-B clock I/O, USB0 positive differential signal (enabled via USBIOEN bit in GPACTRL2); may glitch during power-up when on-chip VREG is used."+ },+ {+ "number": "63",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "64",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "65",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "66",+ "name": "GPIO3/EPWM2B/SPISOMIA/COMP2OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 3; alternate functions: ePWM2 output B, SPI-A slave out/master in I/O, Comparator 2 direct output; pullup not enabled at reset."+ },+ {+ "number": "67",+ "name": "GPIO2/EPWM2A",+ "type": "bidirectional",+ "description": "General-purpose I/O 2; alternate function: ePWM2 output A with HRPWM channel; pullup not enabled at reset."+ },+ {+ "number": "68",+ "name": "GPIO1/EPWM1B/COMP1OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O 1; alternate functions: ePWM1 output B, Comparator 1 direct output; pullup not enabled at reset."+ },+ {+ "number": "69",+ "name": "GPIO0/EPWM1A",+ "type": "bidirectional",+ "description": "General-purpose I/O 0; alternate function: ePWM1 output A with HRPWM channel; pullup not enabled at reset."+ },+ {+ "number": "70",+ "name": "GPIO15/ECAP2/SCIRXDB/SPISTEB",+ "type": "bidirectional",+ "description": "General-purpose I/O 15; alternate functions: eCAP2 I/O, SCI-B receive input, SPI-B slave transmit enable I/O; internal pullup enabled at reset."+ },+ {+ "number": "71",+ "name": "VREGENZ",+ "type": "input",+ "description": "Internal voltage regulator enable with internal pulldown; tie low (to VSS) to enable internal 1.8-V VREG; tie high (to VDDIO) to disable VREG and use an external 1.8-V supply."+ },+ {+ "number": "72",+ "name": "VDD",+ "type": "power_in",+ "description": "1.8-V CPU and logic digital power; place one 1.2-µF decoupling capacitor between each VDD pin and ground."+ },+ {+ "number": "73",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference pin."+ },+ {+ "number": "74",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3-V digital I/O buffer power; single supply source when VREG is enabled; place a decoupling capacitor on each pin."+ },+ {+ "number": "75",+ "name": "GPIO13/TZ2/SPISOMIB",+ "type": "bidirectional",+ "description": "General-purpose I/O 13; alternate functions: Trip Zone input 2, SPI-B slave out/master in I/O; internal pullup enabled at reset."+ },+ {+ "number": "76",+ "name": "GPIO14/TZ3/SCITXDB/SPICLKB",+ "type": "bidirectional",+ "description": "General-purpose I/O 14; alternate functions: Trip Zone input 3, SCI-B transmit output, SPI-B clock I/O; internal pullup enabled at reset."+ },+ {+ "number": "77",+ "name": "GPIO24/ECAP1/EQEP2A/SPISIMOB",+ "type": "bidirectional",+ "description": "General-purpose I/O 24; alternate functions: eCAP1 I/O, eQEP2 input A (PZ/PZP packages only), SPI-B slave in/master out I/O; internal pullup enabled at reset."+ },+ {+ "number": "78",+ "name": "GPIO22/EQEP1S/MCLKXA/SCITXDB",+ "type": "bidirectional",+ "description": "General-purpose I/O 22; alternate functions: eQEP1 strobe I/O, McBSP transmit clock I/O, SCI-B transmit output; internal pullup enabled at reset."+ },+ {+ "number": "79",+ "name": "GPIO32/SDAA/EPWMSYNCI/ADCSOCAO",+ "type": "bidirectional",+ "description": "General-purpose I/O 32; alternate functions: I2C data open-drain bidirectional, ePWM external sync pulse input, ADC start-of-conversion A output; internal pullup enabled at reset."+ },+ {+ "number": "80",+ "name": "GPIO33/SCLA/EPWMSYNCO/ADCSOCBO",+ "type": "bidirectional",+ "description": "General-purpose I/O 33; alternate functions: I2C clock open-drain bidirectional, ePWM external sync pulse output, ADC start-of-conversion B output; internal pullup enabled at reset."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 19 shares ADCINA0 and VREFHI functions that are mutually exclusive on 80-pin PN package; pin lis; Pin 21 permanently connects VREFLO to VSSA on 80-pin PN package per datasheet note; listed as VREFLO; ADCINA3 and ADCINB3, ADCINB7 are not available on 80-pin PN package; only available on 100-pin PZ/PZ"+ ],+ "pages_sent": 42,+ "cost_usd": 1.4647,+ "at": "2026-09-27T03:49:37"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tms320f28062f",+ "pages": 206,+ "sha256": "3033efed856fc72a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 80,+ "described": 80,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}