TMC2262

{
 "schema": "adom/mark-plan@1",
 "mpn": "TMC2262AFV+",
 "step": "/home/adom/project/chip-fetcher/library/TMC2262AFV+/TMC2262AFV+.step",
 "footprint": "/home/adom/project/chip-fetcher/library/TMC2262AFV+/TMC2262AFV+.kicad_mod",
 "standUp": [],
 "standUpSource": "as-is (Z up)",
 "face": "top",
 "pin1": {
  "source": "footprint pad 1",
  "xyMm": [
   -2.1625,
   1.73
  ],
  "corner": "left/lower"
 },
 "existingMarks": [],
 "vendorMarking": {
  "present": false,
  "glyphFaces": 2
 },
 "faceNormal": [
  0,
  0,
  1
 ],
 "longAxis": {
  "axis": "y",
  "vector": [
   0.0,
   1.0,
   0.0
  ],
  "why": "longest usable top dimension (6.00 mm vs 5.03 mm)",
  "override": null
 },
 "readingDirection": {
  "vector": [
   -0.0,
   -1.0,
   0.0
  ],
  "angleDeg": 270,
  "textUp": [
   1.0,
   -0.0,
   0.0
  ],
  "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
 },
 "band": {
  "regionMm": [
   -2.03,
   -3.0,
   3.0,
   3.0
  ],
  "zMm": 0.75,
  "lengthMm": 6.0,
  "heightMm": 5.03,
  "why": "highest flat face over the body centre",
  "terminationsExcludedBy": null,
  "trimmedEnds": [],
  "keepouts": [
   [
    -2.55,
    2.05,
    -2.05,
    2.55
   ]
  ],
  "sideTurn": null,
  "margins": {
   "lengthEachSide": 0.12,
   "heightEachSide": 0.15
  }
 },
 "text": {
  "lines": [
   "TMC2262",
   "AFV+"
  ],
  "chars": 11,
  "capHeightMm": 0.8201,
  "smallestLineMm": 0.8201,
  "heightPctOfBand": 37.5,
  "why": "two lines: the smaller line (0.820 mm) beats one line (0.516 mm) by 1.59x",
  "alternative": {
   "lines": [
    "TMC2262AFV+"
   ],
   "capHeightMm": 0.5158,
   "smallestLineMm": 0.5158
  },
  "font": "service-step2glb /laser-etch (single-stroke outline font)"
 },
 "etch": {
  "poseQuarterTurnsZ": 1,
  "service": "/laser-etch?mode=flat",
  "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
 },
 "outline": {
  "upAxis": "z",
  "poseRotZDeg": 180,
  "rot": 90,
  "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn TMC2262AFV+ (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws TMC2262 / AFV+ on the planned band, rot 90)",
  "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
 },
 "widget": {
  "px": 320,
  "pxPerMm": 33.94,
  "capHeightPx": 22.7
 },
 "hints": [],
 "warnings": [],
 "summary": "Mark along the 6.00 mm axis (-Y), 0.82 mm text (2 lines), upright with pin 1 left lower, outline rot 90 after a 180 deg pose turn; ~23 px caps at 320 px"
}