main
Ray
Publish 0.1.1
23370e0
TM7715
TM(Shenzhen Titan Micro Elec) · Analog To Digital Converters (ADCs) · TSSOP-16
TM7715 from TM(Shenzhen Titan Micro Elec), in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD). |
| 2 | XI | input | Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V. |
| 3 | XO | output | Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF). |
| 4 | CSN | input | Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation). |
| 5 | RESET | input | Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns. |
| 6 | AVDD | power_in | Analog supply, 3 V or 5 V with ±5% tolerance. |
| 7 | AINP | input | Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |
| 8 | AINN | input | Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |
| 9 | REF INP | input | Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance. |
| 10 | REF INN | input | Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions). |
| 11 | AGND | power_in | Analog ground. |
| 12 | OKL | output | ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read. |
| 13 | DOUT | output | Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK. |
| 14 | DIN | input | Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns. |
| 15 | DVDD | power_in | Digital supply, 3 V or 5 V with ±5% tolerance. |
| 16 | DGND | power_in | Digital ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | TSSOP-16 |
| Category | ADC/DAC/Data Conversion |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 逻辑电源电压 (Logic supply voltage) | VDD | -0.3 | 7 | V | 8 | ||
| 模拟输入电压 (Analog input voltage) | Vin | -0.3 | V | 8 | |||
| 数字输出电压 (Digital output voltage) | Vout | -0.3 | V | 8 | |||
| 工作温度范围 (Operating temperature range) | Topr | -40 | 85 | ℃ | 8 | ||
| 储存温度范围 (Storage temperature range) | Tstg | -65 | 150 | ℃ | 8 | ||
| 结温 (Junction temperature) | Tj | 150 | ℃ | 8 | |||
| 静电 ESD 人体模式 (ESD HBM) | 4000 | V | Human body model (HBM) | 8 | |||
| 积分非线性 (Integral nonlinearity) | 0 | 0.003 | %of FSR | 8 | |||
| 双极性负满标度误差 (Bipolar negative full-scale error) | 0 | 0.001 | 0.003 | %of FSR/℃ | 8 | ||
| REF IN 绝对/共模电压 (REF IN absolute/common-mode voltage) | 0 | V | 9 | ||||
| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) | -0.03 | V | BUFEN=0 | 9 | |||
| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) | 0.05 | V | BUFEN=1 | 9 | |||
| AIN 差分电压 单极性输入 (AIN differential voltage, unipolar) | 0 | V | 单极性输入 | 9 | |||
| REFINP, REFINN 差值 (REFINP-REFINN difference) | 1 | 1.75 | V | VDD=3V, Vref=1.225V | 9 | ||
| REFINP, REFINN 差值 (REFINP-REFINN difference) | 1 | 3.5 | V | VDD=5V, Vref=2.5V | 9 | ||
| 输入低电平 VIL (Input low voltage) | VIL | 0.8 | V | 除 SCLK and XI; VDD=5V | 9 | ||
| 输入低电平 VIL (Input low voltage) | VIL | 0.4 | V | 除 SCLK and XI; VDD=3V | 9 | ||
| 输入高电平 VIH (Input high voltage) | VIH | 2 | V | 除 SCLK and XI | 9 | ||
| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1.4 | 3 | V | SCLK, VDD=5V | 9 | |
| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.8 | 1.4 | V | SCLK, VDD=5V | 9 | |
| 施密特触发输入 SCLK VT+, VT- (Schmitt hysteresis SCLK) | VT+, VT_ | 0.4 | 0.8 | V | SCLK, VDD=5V | 9 | |
| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1 | 2.5 | V | SCLK, VDD=3V | 9 | |
| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.4 | 1.1 | V | SCLK, VDD=3V | 9 | |
| 施密特触发输入 SCLK VT+ VT- (Schmitt hysteresis SCLK) | VT+ VT_ | 0.375 | 0.8 | V | SCLK, VDD=3V | 9 | |
| XI 输入低电平 (XI input low) | 0.8 | V | XI, VDD=5V | 9 | |||
| XI 输入高电平 (XI input high) | 3.5 | V | XI, VDD=5V | 9 | |||
| XI 输入低电平 (XI input low) | 0.4 | V | XI, VDD=3V | 9 | |||
| XI 输入高电平 (XI input high) | 2.5 | V | XI, VDD=3V | 9 | |||
| 掉电模式电流 (Power-down current) | 8 | uA | VDD=3V, XI=0V/VDD | 10 | |||
| 单极性失调漂移 (Unipolar offset drift) | 0.5 | μV/℃ | 8 | ||||
| 双极性零漂移 (Bipolar zero drift) | 0.5 | μV/℃ | PGA=1-4 | 8 | |||
| 双极性零漂移 (Bipolar zero drift) | 0.1 | μV/℃ | PGA=8-128 | 8 | |||
| 满标度漂移 (Full-scale drift) | 0.5 | μV/℃ | 8 | ||||
| 增益误差漂移 (Gain error drift) | 0.5 | ppm of FSR/℃ | 8 | ||||
| AIN 输入电流 (AIN input current) | 1 | nA | 9 | ||||
| AIN 采集电容 (AIN acquisition capacitance) | 10 | pF | 9 | ||||
| 电源电流 (Supply current) | 0.32 | mA | 3V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 | |||
| 电源电流 (Supply current) | 0.6 | mA | 3V; BUFEN=1; fCLKIN=1 MHz; gain 1-128 | 10 | |||
| 电源电流 (Supply current) | 0.4 | mA | 3V; BUFEN=0; fCLKIN=2.4576 MHz; gain 1-4 | 10 | |||
| 电源电流 (Supply current) | 0.7 | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 | |||
| 电源电流 (Supply current) | 1.1 | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 | |||
| 电源电流 (Supply current) | 0.45 | mA | 5V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 | |||
| 电源电流 (Supply current) | 0.85 | mA | 5V; BUFEN=0; fCLKIN=2.4576 MHz; gain 8-128 | 10 | |||
| 电源电流 (Supply current) | 0.9 | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 | |||
| 电源电流 (Supply current) | 1.3 | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 | |||
| 主时钟频率 (Master clock frequency) | fCLKIN | 400 | 2500 | kHz | 4 | ||
| RESET 脉冲宽度 (RESET pulse width) | tR | 100 | ns | 4 | |||
| CSN↓→SCLK 第一个上升沿 (CSN falling to first SCLK rising edge) | Tcsn1 | 120 | ns | 4 | |||
| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 | 80 | ns | VDD=5V | 4 | |
| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 | 100 | ns | VDD=3V | 4 | |
| SCLK↑→CSN↑时间 (SCLK rising to CSN rising) | Tcsn2 | 0 | ns | 4 | |||
| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout | 10 | 60 | ns | VDD=5V | 4 | |
| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout | 100 | ns | VDD=3V | 4 | ||
| DIN 有效→SCLK↑采集时间 (DIN setup to SCLK rising) | tds | 30 | ns | 4 | |||
| DIN 有效→SCLK↑保持时间 (DIN hold after SCLK rising) | tdh | 20 | ns | 4 | |||
| OKL↓→CSN↓时间 (OKL falling to CSN falling) | toc | 0 | ns | 4 | |||
| Clock 脉冲宽度 (Clock pulse width) | tspw | 100 | ns | 4 |
CAD (KiCad official)
- Symbol:
TM7715 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tm7715-etched.step/tm7715-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm7715.step/tm7715.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (13 pp, sha256
7c1465ff053aadf2, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM7715
**TM(Shenzhen Titan Micro Elec)** · Analog To Digital Converters (ADCs) · TSSOP-16
TM7715 from TM(Shenzhen Titan Micro Elec), in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD). |
| 2 | XI | input | Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V. |
| 3 | XO | output | Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF). |
| 4 | CSN | input | Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation). |
| 5 | RESET | input | Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns. |
| 6 | AVDD | power_in | Analog supply, 3 V or 5 V with ±5% tolerance. |
| 7 | AINP | input | Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |
| 8 | AINN | input | Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |
| 9 | REF INP | input | Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance. |
| 10 | REF INN | input | Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions). |
| 11 | AGND | power_in | Analog ground. |
| 12 | OKL | output | ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read. |
| 13 | DOUT | output | Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK. |
| 14 | DIN | input | Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns. |
| 15 | DVDD | power_in | Digital supply, 3 V or 5 V with ±5% tolerance. |
| 16 | DGND | power_in | Digital ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | TSSOP-16 |
| Category | ADC/DAC/Data Conversion |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 逻辑电源电压 (Logic supply voltage) | VDD | -0.3 | | 7 | V | | 8 |
| 模拟输入电压 (Analog input voltage) | Vin | -0.3 | | | V | | 8 |
| 数字输出电压 (Digital output voltage) | Vout | -0.3 | | | V | | 8 |
| 工作温度范围 (Operating temperature range) | Topr | -40 | | 85 | ℃ | | 8 |
| 储存温度范围 (Storage temperature range) | Tstg | -65 | | 150 | ℃ | | 8 |
| 结温 (Junction temperature) | Tj | | | 150 | ℃ | | 8 |
| 静电 ESD 人体模式 (ESD HBM) | | | | 4000 | V | Human body model (HBM) | 8 |
| 积分非线性 (Integral nonlinearity) | | 0 | | 0.003 | %of FSR | | 8 |
| 双极性负满标度误差 (Bipolar negative full-scale error) | | 0 | 0.001 | 0.003 | %of FSR/℃ | | 8 |
| REF IN 绝对/共模电压 (REF IN absolute/common-mode voltage) | | 0 | | | V | | 9 |
| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) | | -0.03 | | | V | BUFEN=0 | 9 |
| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) | | 0.05 | | | V | BUFEN=1 | 9 |
| AIN 差分电压 单极性输入 (AIN differential voltage, unipolar) | | 0 | | | V | 单极性输入 | 9 |
| REFINP, REFINN 差值 (REFINP-REFINN difference) | | 1 | | 1.75 | V | VDD=3V, Vref=1.225V | 9 |
| REFINP, REFINN 差值 (REFINP-REFINN difference) | | 1 | | 3.5 | V | VDD=5V, Vref=2.5V | 9 |
| 输入低电平 VIL (Input low voltage) | VIL | | | 0.8 | V | 除 SCLK and XI; VDD=5V | 9 |
| 输入低电平 VIL (Input low voltage) | VIL | | | 0.4 | V | 除 SCLK and XI; VDD=3V | 9 |
| 输入高电平 VIH (Input high voltage) | VIH | 2 | | | V | 除 SCLK and XI | 9 |
| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1.4 | | 3 | V | SCLK, VDD=5V | 9 |
| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.8 | | 1.4 | V | SCLK, VDD=5V | 9 |
| 施密特触发输入 SCLK VT+, VT- (Schmitt hysteresis SCLK) | VT+, VT_ | 0.4 | | 0.8 | V | SCLK, VDD=5V | 9 |
| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1 | | 2.5 | V | SCLK, VDD=3V | 9 |
| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.4 | | 1.1 | V | SCLK, VDD=3V | 9 |
| 施密特触发输入 SCLK VT+ VT- (Schmitt hysteresis SCLK) | VT+ VT_ | 0.375 | | 0.8 | V | SCLK, VDD=3V | 9 |
| XI 输入低电平 (XI input low) | | | | 0.8 | V | XI, VDD=5V | 9 |
| XI 输入高电平 (XI input high) | | 3.5 | | | V | XI, VDD=5V | 9 |
| XI 输入低电平 (XI input low) | | | | 0.4 | V | XI, VDD=3V | 9 |
| XI 输入高电平 (XI input high) | | 2.5 | | | V | XI, VDD=3V | 9 |
| 掉电模式电流 (Power-down current) | | | | 8 | uA | VDD=3V, XI=0V/VDD | 10 |
| 单极性失调漂移 (Unipolar offset drift) | | | 0.5 | | μV/℃ | | 8 |
| 双极性零漂移 (Bipolar zero drift) | | | 0.5 | | μV/℃ | PGA=1-4 | 8 |
| 双极性零漂移 (Bipolar zero drift) | | | 0.1 | | μV/℃ | PGA=8-128 | 8 |
| 满标度漂移 (Full-scale drift) | | | 0.5 | | μV/℃ | | 8 |
| 增益误差漂移 (Gain error drift) | | | 0.5 | | ppm of FSR/℃ | | 8 |
| AIN 输入电流 (AIN input current) | | | 1 | | nA | | 9 |
| AIN 采集电容 (AIN acquisition capacitance) | | | 10 | | pF | | 9 |
| 电源电流 (Supply current) | | | 0.32 | | mA | 3V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 |
| 电源电流 (Supply current) | | | 0.6 | | mA | 3V; BUFEN=1; fCLKIN=1 MHz; gain 1-128 | 10 |
| 电源电流 (Supply current) | | | 0.4 | | mA | 3V; BUFEN=0; fCLKIN=2.4576 MHz; gain 1-4 | 10 |
| 电源电流 (Supply current) | | | 0.7 | | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 |
| 电源电流 (Supply current) | | | 1.1 | | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 |
| 电源电流 (Supply current) | | | 0.45 | | mA | 5V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 |
| 电源电流 (Supply current) | | | 0.85 | | mA | 5V; BUFEN=0; fCLKIN=2.4576 MHz; gain 8-128 | 10 |
| 电源电流 (Supply current) | | | 0.9 | | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 |
| 电源电流 (Supply current) | | | 1.3 | | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 |
| 主时钟频率 (Master clock frequency) | fCLKIN | 400 | | 2500 | kHz | | 4 |
| RESET 脉冲宽度 (RESET pulse width) | tR | 100 | | | ns | | 4 |
| CSN↓→SCLK 第一个上升沿 (CSN falling to first SCLK rising edge) | Tcsn1 | 120 | | | ns | | 4 |
| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 | | 80 | ns | VDD=5V | 4 |
| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 | | 100 | ns | VDD=3V | 4 |
| SCLK↑→CSN↑时间 (SCLK rising to CSN rising) | Tcsn2 | 0 | | | ns | | 4 |
| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout | 10 | | 60 | ns | VDD=5V | 4 |
| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout | | 100 | | ns | VDD=3V | 4 |
| DIN 有效→SCLK↑采集时间 (DIN setup to SCLK rising) | tds | 30 | | | ns | | 4 |
| DIN 有效→SCLK↑保持时间 (DIN hold after SCLK rising) | tdh | 20 | | | ns | | 4 |
| OKL↓→CSN↓时间 (OKL falling to CSN falling) | toc | 0 | | | ns | | 4 |
| Clock 脉冲宽度 (Clock pulse width) | tspw | 100 | | | ns | | 4 |
## CAD (KiCad official)
- Symbol: `TM7715`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `tm7715-etched.step` / `tm7715-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm7715.step` / `tm7715.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm7715-datasheet.pdf) (13 pp, sha256 `7c1465ff053aadf2`, retrieved 2026-11-11, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm7715-datasheet.pdf)