← Commit history

Publish 0.1.1

Ray ·23370e0877 · ·parent 7304cc4
5 files changed +572−542
README.md+73−54
@@ -8,21 +8,21 @@ TM7715 from TM(Shenzhen Titan Micro Elec), in a TSSOP-16. Pinout and pin descrip  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | SCLK | input | Serial clock input for register read/write; data is written on the rising edge and output on the falling edge, with Schmitt-trigger input. |-| 2 | XI | input | Clock input for a crystal or external clock, with fCLKIN of 400 kHz to 2500 kHz. |-| 3 | XO | output | Clock output for the crystal oscillator. |-| 4 | CSN | input | Active-low chip select; must be pulled low to read/write registers and returned high afterwards. |-| 5 | RESET | input | Active-low reset input that resets logic, digital filter, modulator and registers to defaults, minimum pulse width 100 ns. |-| 6 | AVDD | power_in | Analog supply, 3V or 5V operation with ±5% tolerance. |-| 7 | AINP | input | Positive differential analog input of the channel. |-| 8 | AINN | input | Negative differential analog input of the channel. |-| 9 | REF INP | input | Positive reference input; must be greater than REF INN, with reference of 2.5V at 5V supply or 1.225V at 3V supply. |-| 10 | REF INN | input | Negative reference input; REF INP must be greater than REF INN. |+| 1 | SCLK | input | Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD). |+| 2 | XI | input | Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V. |+| 3 | XO | output | Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF). |+| 4 | CSN | input | Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation). |+| 5 | RESET | input | Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns. |+| 6 | AVDD | power_in | Analog supply, 3 V or 5 V with ±5% tolerance. |+| 7 | AINP | input | Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |+| 8 | AINN | input | Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V. |+| 9 | REF INP | input | Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance. |+| 10 | REF INN | input | Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions). | | 11 | AGND | power_in | Analog ground. |-| 12 | OKL | output | Conversion-complete logic output flag; low means ADC data is ready to read, high means conversion or update in progress. |-| 13 | DOUT | output | Serial data output, data is shifted out on the falling edge of SCLK, MSB first. |-| 14 | DIN | input | Serial data input, data is written on the rising edge of SCLK, MSB first. |-| 15 | DVDD | power_in | Digital supply, 3V or 5V operation with ±5% tolerance. |+| 12 | OKL | output | ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read. |+| 13 | DOUT | output | Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK. |+| 14 | DIN | input | Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns. |+| 15 | DVDD | power_in | Digital supply, 3 V or 5 V with ±5% tolerance. | | 16 | DGND | power_in | Digital ground. |  ## Key specifications@@ -40,44 +40,63 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Logic supply voltage 逻辑电源电压 | VDD | -0.3 |  | 7 | V | TA = +25℃ unless otherwise noted | 8 |-| Analog input voltage 模拟输入电压 | Vin | -0.3 |  |  | V | TA = +25℃ unless otherwise noted | 8 |-| Digital input voltage 数字输入电压 |  | -0.3 |  |  | V | TA = +25℃ unless otherwise noted | 8 |-| Digital output voltage 数字输出电压 | Vout | -0.3 |  |  | V | TA = +25℃ unless otherwise noted | 8 |-| Operating temperature range 工作温度范围 | Topr | -40 |  | 85 | ℃ | TA = +25℃ unless otherwise noted | 8 |-| Storage temperature range 储存温度范围 | Tstg | -65 |  | 150 | ℃ | TA = +25℃ unless otherwise noted | 8 |-| Junction temperature 结温 | Tj |  |  | 150 | ℃ | TA = +25℃ unless otherwise noted | 8 |-| ESD human body model 静电 ESD 人体模式 |  |  |  | 4000 | V | human body model (HBM) | 8 |-| REFINP, REFINN differential reference voltage |  | 1 |  | 1.75 | V | VDD=3V, Vref=1.225V | 9 |-| REFINP, REFINN differential reference voltage |  | 1 |  | 3.5 | V | VDD=5V, Vref=2.5V | 9 |-| Schmitt trigger positive threshold VT+ (SCLK) | VT+ | 1.4 |  | 3 | V | VDD=5V | 9 |-| Schmitt trigger negative threshold VT_ (SCLK) | VT_ | 0.8 |  | 1.4 | V | VDD=5V | 9 |-| Schmitt trigger hysteresis VT+, VT_ (SCLK) | VT+, VT_ | 0.4 |  | 0.8 | V | VDD=5V | 9 |-| Schmitt trigger positive threshold VT+ (SCLK) | VT+ | 1 |  | 2.5 | V | VDD=3V | 9 |-| Schmitt trigger negative threshold VT_ (SCLK) | VT_ | 0.4 |  | 1.1 | V | VDD=3V | 9 |-| Schmitt trigger hysteresis VT+ VT_ (SCLK) | VT+, VT_ | 0.375 |  | 0.8 | V | VDD=3V | 9 |-| Digital input low voltage VIL (except SCLK and XI) | VIL |  |  | 0.8 | V | VDD=5V | 9 |-| Digital input low voltage VIL (except SCLK and XI) | VIL |  |  | 0.4 | V | VDD=3V | 9 |-| Digital input high voltage VIH (except SCLK and XI) | VIH | 2 |  |  | V |  | 9 |-| XI input low voltage |  |  |  | 0.8 | V | VDD=5V | 9 |-| XI input high voltage |  | 3.5 |  |  | V | VDD=5V | 9 |-| XI input low voltage |  |  |  | 0.4 | V | VDD=3V | 9 |-| XI input high voltage |  | 2.5 |  |  | V | VDD=3V | 9 |-| Integral nonlinearity 积分非线性 |  | -0.003 |  | 0.003 | %of FSR |  | 8 |-| Master clock frequency fCLKIN | fCLKIN | 400 |  | 2500 | kHz |  | 4 |-| Data output valid after SCLK falling edge tdo | tdo | 0 |  | 80 | ns | VDD=5V | 4 |-| Data output valid after SCLK falling edge tdo | tdo | 0 |  | 100 | ns | VDD=3V | 4 |-| Bus release time after SCLK rising edge tsout | tsout | 10 |  | 60 | ns | VDD=5V | 4 |-| DIN setup time to SCLK rising edge tds | tds | 30 |  |  | ns |  | 4 |-| DIN hold time after SCLK rising edge tdh | tdh | 20 |  |  | ns |  | 4 |-| Clock pulse width high (low) tspw | tspw | 100 |  |  | ns |  | 4 |-| RESET pulse width tR | tR | 100 |  |  | ns |  | 4 |-| CSN falling to first SCLK rising edge Tcsn1 | Tcsn1 | 120 |  |  | ns |  | 4 |-| SCLK rising to CSN rising Tcsn2 | Tcsn2 | 0 |  |  | ns |  | 4 |-| OKL falling to CSN falling toc | toc | 0 |  |  | ns |  | 4 |-| Supply voltage tolerance (3V or 5V operation) 工作电压范围 |  | -5 |  | 5 | % | 3V or 5V operating voltage | 1 |-| Maximum power dissipation 最大功耗 |  |  |  | 1 | mW | 3V supply | 1 |-| Power-down mode maximum current 掉电模式电流最大值 |  |  |  | 8 | μA | power-down mode | 1 |+| 逻辑电源电压 (Logic supply voltage) | VDD | -0.3 |  | 7 | V |  | 8 |+| 模拟输入电压 (Analog input voltage) | Vin | -0.3 |  |  | V |  | 8 |+| 数字输出电压 (Digital output voltage) | Vout | -0.3 |  |  | V |  | 8 |+| 工作温度范围 (Operating temperature range) | Topr | -40 |  | 85 | ℃ |  | 8 |+| 储存温度范围 (Storage temperature range) | Tstg | -65 |  | 150 | ℃ |  | 8 |+| 结温 (Junction temperature) | Tj |  |  | 150 | ℃ |  | 8 |+| 静电 ESD 人体模式 (ESD HBM) |  |  |  | 4000 | V | Human body model (HBM) | 8 |+| 积分非线性 (Integral nonlinearity) |  | 0 |  | 0.003 | %of FSR |  | 8 |+| 双极性负满标度误差 (Bipolar negative full-scale error) |  | 0 | 0.001 | 0.003 | %of FSR/℃ |  | 8 |+| REF IN 绝对/共模电压 (REF IN absolute/common-mode voltage) |  | 0 |  |  | V |  | 9 |+| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) |  | -0.03 |  |  | V | BUFEN=0 | 9 |+| AIN 绝对/共模电压 (AIN absolute/common-mode voltage) |  | 0.05 |  |  | V | BUFEN=1 | 9 |+| AIN 差分电压 单极性输入 (AIN differential voltage, unipolar) |  | 0 |  |  | V | 单极性输入 | 9 |+| REFINP, REFINN 差值 (REFINP-REFINN difference) |  | 1 |  | 1.75 | V | VDD=3V, Vref=1.225V | 9 |+| REFINP, REFINN 差值 (REFINP-REFINN difference) |  | 1 |  | 3.5 | V | VDD=5V, Vref=2.5V | 9 |+| 输入低电平 VIL (Input low voltage) | VIL |  |  | 0.8 | V | 除 SCLK and XI; VDD=5V | 9 |+| 输入低电平 VIL (Input low voltage) | VIL |  |  | 0.4 | V | 除 SCLK and XI; VDD=3V | 9 |+| 输入高电平 VIH (Input high voltage) | VIH | 2 |  |  | V | 除 SCLK and XI | 9 |+| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1.4 |  | 3 | V | SCLK, VDD=5V | 9 |+| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.8 |  | 1.4 | V | SCLK, VDD=5V | 9 |+| 施密特触发输入 SCLK VT+, VT- (Schmitt hysteresis SCLK) | VT+, VT_ | 0.4 |  | 0.8 | V | SCLK, VDD=5V | 9 |+| 施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) | VT+ | 1 |  | 2.5 | V | SCLK, VDD=3V | 9 |+| 施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) | VT_ | 0.4 |  | 1.1 | V | SCLK, VDD=3V | 9 |+| 施密特触发输入 SCLK VT+ VT- (Schmitt hysteresis SCLK) | VT+ VT_ | 0.375 |  | 0.8 | V | SCLK, VDD=3V | 9 |+| XI 输入低电平 (XI input low) |  |  |  | 0.8 | V | XI, VDD=5V | 9 |+| XI 输入高电平 (XI input high) |  | 3.5 |  |  | V | XI, VDD=5V | 9 |+| XI 输入低电平 (XI input low) |  |  |  | 0.4 | V | XI, VDD=3V | 9 |+| XI 输入高电平 (XI input high) |  | 2.5 |  |  | V | XI, VDD=3V | 9 |+| 掉电模式电流 (Power-down current) |  |  |  | 8 | uA | VDD=3V, XI=0V/VDD | 10 |+| 单极性失调漂移 (Unipolar offset drift) |  |  | 0.5 |  | μV/℃ |  | 8 |+| 双极性零漂移 (Bipolar zero drift) |  |  | 0.5 |  | μV/℃ | PGA=1-4 | 8 |+| 双极性零漂移 (Bipolar zero drift) |  |  | 0.1 |  | μV/℃ | PGA=8-128 | 8 |+| 满标度漂移 (Full-scale drift) |  |  | 0.5 |  | μV/℃ |  | 8 |+| 增益误差漂移 (Gain error drift) |  |  | 0.5 |  | ppm of FSR/℃ |  | 8 |+| AIN 输入电流 (AIN input current) |  |  | 1 |  | nA |  | 9 |+| AIN 采集电容 (AIN acquisition capacitance) |  |  | 10 |  | pF |  | 9 |+| 电源电流 (Supply current) |  |  | 0.32 |  | mA | 3V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 |+| 电源电流 (Supply current) |  |  | 0.6 |  | mA | 3V; BUFEN=1; fCLKIN=1 MHz; gain 1-128 | 10 |+| 电源电流 (Supply current) |  |  | 0.4 |  | mA | 3V; BUFEN=0; fCLKIN=2.4576 MHz; gain 1-4 | 10 |+| 电源电流 (Supply current) |  |  | 0.7 |  | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 |+| 电源电流 (Supply current) |  |  | 1.1 |  | mA | 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 |+| 电源电流 (Supply current) |  |  | 0.45 |  | mA | 5V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 | 10 |+| 电源电流 (Supply current) |  |  | 0.85 |  | mA | 5V; BUFEN=0; fCLKIN=2.4576 MHz; gain 8-128 | 10 |+| 电源电流 (Supply current) |  |  | 0.9 |  | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 | 10 |+| 电源电流 (Supply current) |  |  | 1.3 |  | mA | 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 | 10 |+| 主时钟频率 (Master clock frequency) | fCLKIN | 400 |  | 2500 | kHz |  | 4 |+| RESET 脉冲宽度 (RESET pulse width) | tR | 100 |  |  | ns |  | 4 |+| CSN↓→SCLK 第一个上升沿 (CSN falling to first SCLK rising edge) | Tcsn1 | 120 |  |  | ns |  | 4 |+| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 |  | 80 | ns | VDD=5V | 4 |+| SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) | tdo | 0 |  | 100 | ns | VDD=3V | 4 |+| SCLK↑→CSN↑时间 (SCLK rising to CSN rising) | Tcsn2 | 0 |  |  | ns |  | 4 |+| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout | 10 |  | 60 | ns | VDD=5V | 4 |+| SCLK↑后总线撤回时间 (Bus release time after SCLK rising) | tsout |  | 100 |  | ns | VDD=3V | 4 |+| DIN 有效→SCLK↑采集时间 (DIN setup to SCLK rising) | tds | 30 |  |  | ns |  | 4 |+| DIN 有效→SCLK↑保持时间 (DIN hold after SCLK rising) | tdh | 20 |  |  | ns |  | 4 |+| OKL↓→CSN↓时间 (OKL falling to CSN falling) | toc | 0 |  |  | ns |  | 4 |+| Clock 脉冲宽度 (Clock pulse width) | tspw | 100 |  |  | ns |  | 4 |  ## CAD (KiCad official) @@ -90,9 +109,9 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm7715-datasheet.pdf) (13 pp, sha256 `7c1465ff053aadf2`, retrieved 2026-11-10, tier: lcsc)+- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm7715-datasheet.pdf) (13 pp, sha256 `7c1465ff053aadf2`, retrieved 2026-11-11, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/tm7715-datasheet.pdf)
package.json+24−25
@@ -1,6 +1,6 @@ {   "slug": "tm7715",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,12 +52,11 @@       "lcsc": "C5174520"     },     "distributor_check": {-      "checked_at": "2026-11-10T08:07:43Z",+      "checked_at": "2026-11-11T02:07:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,-        "status": "deferred",-        "error": "shared DigiKey quota guard: 997 calls left today"+        "status": "no match"       },       "mouser": {         "pn": null,@@ -69,61 +68,61 @@         "number": "1",         "name": "SCLK",         "type": "input",-        "description": "Serial clock input for register read/write; data is written on the rising edge and output on the falling edge, with Schmitt-trigger input."+        "description": "Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD)."       },       {         "number": "2",         "name": "XI",         "type": "input",-        "description": "Clock input for a crystal or external clock, with fCLKIN of 400 kHz to 2500 kHz."+        "description": "Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V."       },       {         "number": "3",         "name": "XO",         "type": "output",-        "description": "Clock output for the crystal oscillator."+        "description": "Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF)."       },       {         "number": "4",         "name": "CSN",         "type": "input",-        "description": "Active-low chip select; must be pulled low to read/write registers and returned high afterwards."+        "description": "Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation)."       },       {         "number": "5",         "name": "RESET",         "type": "input",-        "description": "Active-low reset input that resets logic, digital filter, modulator and registers to defaults, minimum pulse width 100 ns."+        "description": "Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns."       },       {         "number": "6",         "name": "AVDD",         "type": "power_in",-        "description": "Analog supply, 3V or 5V operation with ±5% tolerance."+        "description": "Analog supply, 3 V or 5 V with ±5% tolerance."       },       {         "number": "7",         "name": "AINP",         "type": "input",-        "description": "Positive differential analog input of the channel."+        "description": "Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V."       },       {         "number": "8",         "name": "AINN",         "type": "input",-        "description": "Negative differential analog input of the channel."+        "description": "Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V."       },       {         "number": "9",         "name": "REF INP",         "type": "input",-        "description": "Positive reference input; must be greater than REF INN, with reference of 2.5V at 5V supply or 1.225V at 3V supply."+        "description": "Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance."       },       {         "number": "10",         "name": "REF INN",         "type": "input",-        "description": "Negative reference input; REF INP must be greater than REF INN."+        "description": "Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions)."       },       {         "number": "11",@@ -135,25 +134,25 @@         "number": "12",         "name": "OKL",         "type": "output",-        "description": "Conversion-complete logic output flag; low means ADC data is ready to read, high means conversion or update in progress."+        "description": "ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read."       },       {         "number": "13",         "name": "DOUT",         "type": "output",-        "description": "Serial data output, data is shifted out on the falling edge of SCLK, MSB first."+        "description": "Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK."       },       {         "number": "14",         "name": "DIN",         "type": "input",-        "description": "Serial data input, data is written on the rising edge of SCLK, MSB first."+        "description": "Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns."       },       {         "number": "15",         "name": "DVDD",         "type": "power_in",-        "description": "Digital supply, 3V or 5V operation with ±5% tolerance."+        "description": "Digital supply, 3 V or 5 V with ±5% tolerance."       },       {         "number": "16",@@ -167,17 +166,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet pinout table is shared across DIP16, SOIC16 and TSSOP16 and the TSSOP drawing has no p"+          "extractor flagged: The pin table (section 5) is a single numbering for the 16-pin family and does not name the package ; The datasheet lists AVDD with type I (input). It is an analog supply, so it is mapped to power_in pe; The datasheet does not state which package or ordering code the MPN TM7715 is sold in; the TSSOP-16 "         ],         "pages_sent": 13,-        "cost_usd": 0.0979,-        "at": "2026-11-10T08:07:28"+        "cost_usd": 0.0553,+        "at": "2026-11-11T02:07:19"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/0d7dc9103b451c3aab3ba06b662f009d.pdf",@@ -214,7 +213,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -232,8 +231,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "bb4495176aa444a11ec682b604853e5bf29305ab6cff4e64bcc00b941b66e621",-        "checked": "2026-11-10",+        "sha256": "50a061372307e9f71c0214c77d1700ed692eabac177fe98d630985de624a4514",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+27−26
@@ -4,7 +4,7 @@   "slug": "tm7715",   "title": "TM7715",   "brief": "TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,12 +34,11 @@       "lcsc": "C5174520"     },     "distributor_check": {-      "checked_at": "2026-11-10T08:07:43Z",+      "checked_at": "2026-11-11T02:07:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,-        "status": "deferred",-        "error": "shared DigiKey quota guard: 997 calls left today"+        "status": "no match"       },       "mouser": {         "pn": null,@@ -51,61 +50,61 @@         "number": "1",         "name": "SCLK",         "type": "input",-        "description": "Serial clock input for register read/write; data is written on the rising edge and output on the falling edge, with Schmitt-trigger input."+        "description": "Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD)."       },       {         "number": "2",         "name": "XI",         "type": "input",-        "description": "Clock input for a crystal or external clock, with fCLKIN of 400 kHz to 2500 kHz."+        "description": "Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V."       },       {         "number": "3",         "name": "XO",         "type": "output",-        "description": "Clock output for the crystal oscillator."+        "description": "Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF)."       },       {         "number": "4",         "name": "CSN",         "type": "input",-        "description": "Active-low chip select; must be pulled low to read/write registers and returned high afterwards."+        "description": "Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation)."       },       {         "number": "5",         "name": "RESET",         "type": "input",-        "description": "Active-low reset input that resets logic, digital filter, modulator and registers to defaults, minimum pulse width 100 ns."+        "description": "Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns."       },       {         "number": "6",         "name": "AVDD",         "type": "power_in",-        "description": "Analog supply, 3V or 5V operation with ±5% tolerance."+        "description": "Analog supply, 3 V or 5 V with ±5% tolerance."       },       {         "number": "7",         "name": "AINP",         "type": "input",-        "description": "Positive differential analog input of the channel."+        "description": "Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V."       },       {         "number": "8",         "name": "AINN",         "type": "input",-        "description": "Negative differential analog input of the channel."+        "description": "Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V."       },       {         "number": "9",         "name": "REF INP",         "type": "input",-        "description": "Positive reference input; must be greater than REF INN, with reference of 2.5V at 5V supply or 1.225V at 3V supply."+        "description": "Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance."       },       {         "number": "10",         "name": "REF INN",         "type": "input",-        "description": "Negative reference input; REF INP must be greater than REF INN."+        "description": "Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions)."       },       {         "number": "11",@@ -117,25 +116,25 @@         "number": "12",         "name": "OKL",         "type": "output",-        "description": "Conversion-complete logic output flag; low means ADC data is ready to read, high means conversion or update in progress."+        "description": "ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read."       },       {         "number": "13",         "name": "DOUT",         "type": "output",-        "description": "Serial data output, data is shifted out on the falling edge of SCLK, MSB first."+        "description": "Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK."       },       {         "number": "14",         "name": "DIN",         "type": "input",-        "description": "Serial data input, data is written on the rising edge of SCLK, MSB first."+        "description": "Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns."       },       {         "number": "15",         "name": "DVDD",         "type": "power_in",-        "description": "Digital supply, 3V or 5V operation with ±5% tolerance."+        "description": "Digital supply, 3 V or 5 V with ±5% tolerance."       },       {         "number": "16",@@ -149,17 +148,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet pinout table is shared across DIP16, SOIC16 and TSSOP16 and the TSSOP drawing has no p"+          "extractor flagged: The pin table (section 5) is a single numbering for the 16-pin family and does not name the package ; The datasheet lists AVDD with type I (input). It is an analog supply, so it is mapped to power_in pe; The datasheet does not state which package or ordering code the MPN TM7715 is sold in; the TSSOP-16 "         ],         "pages_sent": 13,-        "cost_usd": 0.0979,-        "at": "2026-11-10T08:07:28"+        "cost_usd": 0.0553,+        "at": "2026-11-11T02:07:19"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/0d7dc9103b451c3aab3ba06b662f009d.pdf",@@ -196,7 +195,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -214,8 +213,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "bb4495176aa444a11ec682b604853e5bf29305ab6cff4e64bcc00b941b66e621",-        "checked": "2026-11-10",+        "sha256": "50a061372307e9f71c0214c77d1700ed692eabac177fe98d630985de624a4514",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -778,5 +777,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
tm7715-hero.overlay.json+436−434
@@ -1,436 +1,438 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "TM7715",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 16,-      "span_mm": 7.2,-      "dash_mm": 0.18,-      "gap_mm": 0.108,-      "pad_stroke_mm": 0.0432-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 3,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 16,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.576,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.2,-      3.2,-      -2.405,-      2.405-    ],-    "pads_bbox_mm": [-      -3.6,-      3.6,-      -2.475,-      2.475-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "tm7715-etched.glb",-    "glb_sha256": "37cb5e61a10af3c9d3ac0ce47c23a6cd37233e3a42103cc86c2f31ac00cbdb41",-    "footprint": "tm7715.kicad_mod",-    "footprint_sha256": "fbac79fc5f310754726589d67071a422c429216f843ecd6013bbe2e6a49e7064",-    "pins": "page.json component.pins",-    "pins_sha256": "253065a5a0728a0b2d808fa0f693f6f5add907e0057ac20fd5169d25b2c02ea5"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "SCLK",-      "x": -4.29,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "XI",-      "x": -3.7,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "XO",-      "x": -3.7,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "CSN",-      "x": -3.7,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "RESET",-      "x": -3.7,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "AVDD",-      "x": -3.7,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "AINP",-      "x": -3.7,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "AINN",-      "x": -3.7,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "REF INP",-      "x": 3.7,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "REF INN",-      "x": 3.7,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "AGND",-      "x": 3.7,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "OKL",-      "x": 3.7,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "DOUT",-      "x": 3.7,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "DIN",-      "x": 3.7,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "DVDD",-      "x": 3.7,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "DGND",-      "x": 3.7,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "TM7715",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 16,+   "span_mm": 7.2,+   "dash_mm": 0.18,+   "gap_mm": 0.108,+   "pad_stroke_mm": 0.0432+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 3,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 16,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.576,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.2,+   3.2,+   -2.405,+   2.405+  ],+  "pads_bbox_mm": [+   -3.6,+   3.6,+   -2.475,+   2.475   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        -2.275-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        -1.625-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        -0.975-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        -0.325-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        0.325-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        0.975-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        1.625-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -2.8625,-        2.275-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        2.275-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        1.625-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        0.975-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        0.325-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        -0.325-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        -0.975-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        -1.625-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        2.8625,-        -2.275-      ],-      "size_mm": [-        1.475,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "tm7715-etched.glb",+  "glb_sha256": "37cb5e61a10af3c9d3ac0ce47c23a6cd37233e3a42103cc86c2f31ac00cbdb41",+  "footprint": "tm7715.kicad_mod",+  "footprint_sha256": "fbac79fc5f310754726589d67071a422c429216f843ecd6013bbe2e6a49e7064",+  "pins": "page.json component.pins",+  "pins_sha256": "253065a5a0728a0b2d808fa0f693f6f5add907e0057ac20fd5169d25b2c02ea5"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "SCLK",+   "x": -4.29,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "XI",+   "x": -3.7,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "XO",+   "x": -3.7,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "CSN",+   "x": -3.7,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "RESET",+   "x": -3.7,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "AVDD",+   "x": -3.7,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "AINP",+   "x": -3.7,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "AINN",+   "x": -3.7,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "REF INP",+   "x": 3.7,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "REF INN",+   "x": 3.7,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "AGND",+   "x": 3.7,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "OKL",+   "x": 3.7,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "DOUT",+   "x": 3.7,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "DIN",+   "x": 3.7,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "DVDD",+   "x": 3.7,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "DGND",+   "x": 3.7,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    -2.275+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    -1.625+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    -0.975+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    -0.325+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    0.325+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    0.975+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    1.625+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -2.8625,+    2.275+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    2.275+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    1.625+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    0.975+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    0.325+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    -0.325+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    -0.975+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    -1.625+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    2.8625,+    -2.275+   ],+   "size_mm": [+    1.475,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
tm7715.lbr+12−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="TSSOP-16_4.4x5mm_P0.65mm">   <description>TSSOP-16, 4.4 x 5 mm, 0.65 mm pitch</description>@@ -90,6 +90,7 @@ </packages> <symbols> <symbol name="TM7715">+  <description>TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>   <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -116,7 +117,7 @@ </symbols> <devicesets> <deviceset name="TM7715" prefix="U">-  <description></description>+  <description>TM(Shenzhen Titan Micro Elec) Analog To Digital Converters (ADCs), TSSOP-16. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="TM7715" x="0" y="0"/>   </gates>@@ -140,7 +141,15 @@         <connect gate="G$1" pin="REF_INN" pad="10"/>         <connect gate="G$1" pin="REF_INP" pad="9"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="TM7715" constant="no"/>+          <attribute name="MANUFACTURER" value="TM(Shenzhen Titan Micro Elec)" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/0d7dc9103b451c3aab3ba06b662f009d.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/tm7715" constant="no"/>+          <attribute name="LCSC_PN" value="C5174520" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>