main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tm7715: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
tm7715-etched.glb Publish 0.1.0 · Ray
tm7715-etched.step tm7715: factory component page (tier=lcsc) · Ray
tm7715-hero.glb tm7715: hero GLB from the etched model (keeps the MPN mark) · Ray
tm7715-hero.overlay.json Publish 0.1.1 · Ray
tm7715.glb Publish 0.1.0 · Ray
tm7715.kicad_mod Publish 0.1.0 · Ray
tm7715.kicad_sym Publish 0.1.0 · Ray
tm7715.lbr Publish 0.1.1 · Ray
tm7715.step Publish 0.1.0 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 16 pins · Ray

TM7715

TM(Shenzhen Titan Micro Elec) · Analog To Digital Converters (ADCs) · TSSOP-16

TM7715 from TM(Shenzhen Titan Micro Elec), in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Serial clock input for register read/write; DIN is sampled on its rising edge and DOUT changes on its falling edge, with Schmitt-trigger thresholds given for SCLK (VT+ up to 3 V at 5 V VDD, 2.5 V at 3 V VDD).
2 XI input Clock input for the crystal or an external clock (2.4576 MHz used in the characterization); input low is at most 0.8 V and input high at least 3.5 V at 5 V, and 0.4 V and 2.5 V at 3 V.
3 XO output Clock output of the crystal oscillator, connected to the second crystal load capacitor in the application circuit (C1/C2, typically 30 pF to 50 pF).
4 CSN input Active-low chip select; registers can only be accessed while CSN is held low and it must be returned high after the transfer (tied to ground in 3-wire operation).
5 RESET input Active-low reset that resets the logic, digital filter and modulator and returns all registers to default; minimum pulse width is 100 ns.
6 AVDD power_in Analog supply, 3 V or 5 V with ±5% tolerance.
7 AINP input Positive differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V.
8 AINN input Negative differential analog input of the single channel; with the buffer disabled (BUFEN=0) the absolute/common-mode range is -0.03 V to VDD+0.03 V.
9 REF INP input Positive differential reference input; it must be greater than REF INN, with a reference of +2.5 V (5 V supply) or +1.225 V (3 V supply), and references below 1 V degrade noise performance.
10 REF INN input Negative differential reference input, with an absolute/common-mode range of 0 to VDD and normally tied to GND (REF INN=GND in the characterization conditions).
11 AGND power_in Analog ground.
12 OKL output ADC conversion-complete flag: low means the ADC result register is updated and can be read, high means a conversion or update is in progress and data cannot be read.
13 DOUT output Serial data output, shifting the result or register data out MSB first on the falling edge of SCLK.
14 DIN input Serial data input, written on the rising edge of SCLK with setup time tds of 30 ns and hold time tdh of 20 ns.
15 DVDD power_in Digital supply, 3 V or 5 V with ±5% tolerance.
16 DGND power_in Digital ground.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package TSSOP-16
Category ADC/DAC/Data Conversion
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
逻辑电源电压 (Logic supply voltage) VDD -0.3 7 V 8
模拟输入电压 (Analog input voltage) Vin -0.3 V 8
数字输出电压 (Digital output voltage) Vout -0.3 V 8
工作温度范围 (Operating temperature range) Topr -40 85 ℃ 8
储存温度范围 (Storage temperature range) Tstg -65 150 ℃ 8
结温 (Junction temperature) Tj 150 ℃ 8
静电 ESD 人体模式 (ESD HBM) 4000 V Human body model (HBM) 8
积分非线性 (Integral nonlinearity) 0 0.003 %of FSR 8
双极性负满标度误差 (Bipolar negative full-scale error) 0 0.001 0.003 %of FSR/℃ 8
REF IN 绝对/共模电压 (REF IN absolute/common-mode voltage) 0 V 9
AIN 绝对/共模电压 (AIN absolute/common-mode voltage) -0.03 V BUFEN=0 9
AIN 绝对/共模电压 (AIN absolute/common-mode voltage) 0.05 V BUFEN=1 9
AIN 差分电压 单极性输入 (AIN differential voltage, unipolar) 0 V 单极性输入 9
REFINP, REFINN 差值 (REFINP-REFINN difference) 1 1.75 V VDD=3V, Vref=1.225V 9
REFINP, REFINN 差值 (REFINP-REFINN difference) 1 3.5 V VDD=5V, Vref=2.5V 9
输入低电平 VIL (Input low voltage) VIL 0.8 V 除 SCLK and XI; VDD=5V 9
输入低电平 VIL (Input low voltage) VIL 0.4 V 除 SCLK and XI; VDD=3V 9
输入高电平 VIH (Input high voltage) VIH 2 V 除 SCLK and XI 9
施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) VT+ 1.4 3 V SCLK, VDD=5V 9
施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) VT_ 0.8 1.4 V SCLK, VDD=5V 9
施密特触发输入 SCLK VT+, VT- (Schmitt hysteresis SCLK) VT+, VT_ 0.4 0.8 V SCLK, VDD=5V 9
施密特触发输入 SCLK VT+ (Schmitt trigger input SCLK) VT+ 1 2.5 V SCLK, VDD=3V 9
施密特触发输入 SCLK VT- (Schmitt trigger input SCLK) VT_ 0.4 1.1 V SCLK, VDD=3V 9
施密特触发输入 SCLK VT+ VT- (Schmitt hysteresis SCLK) VT+ VT_ 0.375 0.8 V SCLK, VDD=3V 9
XI 输入低电平 (XI input low) 0.8 V XI, VDD=5V 9
XI 输入高电平 (XI input high) 3.5 V XI, VDD=5V 9
XI 输入低电平 (XI input low) 0.4 V XI, VDD=3V 9
XI 输入高电平 (XI input high) 2.5 V XI, VDD=3V 9
掉电模式电流 (Power-down current) 8 uA VDD=3V, XI=0V/VDD 10
单极性失调漂移 (Unipolar offset drift) 0.5 μV/℃ 8
双极性零漂移 (Bipolar zero drift) 0.5 μV/℃ PGA=1-4 8
双极性零漂移 (Bipolar zero drift) 0.1 μV/℃ PGA=8-128 8
满标度漂移 (Full-scale drift) 0.5 μV/℃ 8
增益误差漂移 (Gain error drift) 0.5 ppm of FSR/℃ 8
AIN 输入电流 (AIN input current) 1 nA 9
AIN 采集电容 (AIN acquisition capacitance) 10 pF 9
电源电流 (Supply current) 0.32 mA 3V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 10
电源电流 (Supply current) 0.6 mA 3V; BUFEN=1; fCLKIN=1 MHz; gain 1-128 10
电源电流 (Supply current) 0.4 mA 3V; BUFEN=0; fCLKIN=2.4576 MHz; gain 1-4 10
电源电流 (Supply current) 0.7 mA 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 10
电源电流 (Supply current) 1.1 mA 3V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 10
电源电流 (Supply current) 0.45 mA 5V; BUFEN=0; fCLKIN=1 MHz; gain 1-128 10
电源电流 (Supply current) 0.85 mA 5V; BUFEN=0; fCLKIN=2.4576 MHz; gain 8-128 10
电源电流 (Supply current) 0.9 mA 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 1-4 10
电源电流 (Supply current) 1.3 mA 5V; BUFEN=1; fCLKIN=2.4576 MHz; gain 8-128 10
主时钟频率 (Master clock frequency) fCLKIN 400 2500 kHz 4
RESET 脉冲宽度 (RESET pulse width) tR 100 ns 4
CSN↓→SCLK 第一个上升沿 (CSN falling to first SCLK rising edge) Tcsn1 120 ns 4
SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) tdo 0 80 ns VDD=5V 4
SCLK↓→DIN 有效采集间隔时间 (SCLK falling to DIN valid) tdo 0 100 ns VDD=3V 4
SCLK↑→CSN↑时间 (SCLK rising to CSN rising) Tcsn2 0 ns 4
SCLK↑后总线撤回时间 (Bus release time after SCLK rising) tsout 10 60 ns VDD=5V 4
SCLK↑后总线撤回时间 (Bus release time after SCLK rising) tsout 100 ns VDD=3V 4
DIN 有效→SCLK↑采集时间 (DIN setup to SCLK rising) tds 30 ns 4
DIN 有效→SCLK↑保持时间 (DIN hold after SCLK rising) tdh 20 ns 4
OKL↓→CSN↓时间 (OKL falling to CSN falling) toc 0 ns 4
Clock 脉冲宽度 (Clock pulse width) tspw 100 ns 4

CAD (KiCad official)

  • Symbol: TM7715
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tm7715-etched.step / tm7715-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm7715.step / tm7715.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (13 pp, sha256 7c1465ff053aadf2, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF