main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tm1925: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tm1925-etched.glb Publish 0.1.0 · Ray
tm1925-etched.step tm1925: factory component page (tier=lcsc) · Ray
tm1925-hero.glb tm1925: hero GLB from the etched model (keeps the MPN mark) · Ray
tm1925-hero.overlay.json Publish 0.1.0 · Ray
tm1925.glb Publish 0.1.0 · Ray
tm1925.kicad_mod Publish 0.1.0 · Ray
tm1925.kicad_sym Publish 0.1.0 · Ray
tm1925.lbr Publish 0.1.0 · Ray
tm1925.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 14 pins · Ray

TM1925

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-14-150mil

TM1925 from TM(Shenzhen Titan Micro Elec), in a SOP-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V, and 6 to 24 V is supported through a series resistor.
2 NC unconnected No connection (listed as 空脚 in the pin function table), so the pin is left unconnected.
3 DO output Data output that re-transmits the DIN data stream to the next cascaded chip after the first 24×3 bits are received; VOH is VDD−0.5 V minimum at IOH = −6 mA and VOL is 0.4 V maximum at IOL = 10 mA.
4 OUTR3 output Red channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
5 OUTG3 output Green channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
6 OUTB3 output Blue channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
7 GND power_in System ground; all voltages are specified relative to this pin.
8 OUTR2 output Red channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
9 OUTG2 output Green channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
10 OUTB2 output Blue channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
11 OUTR1 output Red channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
12 OUTG1 output Green channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
13 OUTB1 output Blue channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum.
14 DIN input Serial data input with a VIH minimum of 3.5 V and VIL maximum of 1.35 V at VDD = 5 V, and an input voltage range of −0.5 to VDD+0.4 V when a 1 kΩ series resistor is used.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-14-150mil
Category Nixie Tube Driver/LED Driver
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage VDD -0.4 7 V 3
Input voltage range DIN Vin -0.4 V DIN 3
Output current DC OUTR, OUTG, OUTB Iout 19 21 mA 3
Output voltage range OUTR, OUTG, OUTB Vout -0.4 30 V 3
DIN clock rate range Fosc 400 900 KHz DIN 3
Operating temperature range Topr -40 85 ℃ 3
Storage temperature range Tstg -55 150 ℃ 3
ESD Human Body Model (HBM) 3000 V 3
ESD Machine Model (MM) 200 V 3
Logic supply voltage VDD 4.5 5 5.5 V 3
DIN input voltage range VDIN -0.5 V VDD=5V, DIN series 1K resistor 3
DO output voltage range VDO -0.5 V VDD=5V, DIN series 1K resistor 3
OUT output voltage range VOUT -0.5 24 V OUT=OFF 3
Operating temperature range TA -40 85 ℃ 3
Operating junction temperature range TJ -40 125 ℃ 3
Low-level output voltage DO VOL 0.4 V IOL=10mA: DO 4
High-level input voltage VIH 3.5 V VDD=5.0V 4
Low-level input voltage VIL 0 1.35 V VDD=5.0V 4
High-level output current DO IOH 1 mA VDD=5.0V, SDO=5.0V 4
Low-level output current DO IOL 10 mA VDD=5.0V, SDO=1.0V 4
Input current DIN Iin -1 1 μA DIN connected to VDD or GND 4
Logic supply current (VDD) Icco 1.2 3 4.2 mA OUTR,OUTG,OUTB,DIN,DO = open 4
Constant output current range Iolc 19 20 21 mA OUTR,OUTG,OUTB = 3.0V 4
Output leakage current Iolkg 0 0.3 μA OUTR,OUTG,OUTB = OFF 4
OUT PWM period Tpwm 135 140 145 μs OUT pulled up by resistor 4
Constant current error (channel to channel) ΔIolco -3 3 % OUTR,OUTG,OUTB = ON, VOUTn = 1V 4
Constant current error (chip to chip) ΔIolc1 -6 6 % OUTR,OUTG,OUTB = ON, VOUTn = 1V 4
Line regulation ΔIolc2 -1 0.5 1 %/V OUTR,OUTG,OUTB = ON, VOUTn = 1V 4
Load regulation ΔIolc3 -3 1 3 %/V OUTR,OUTG,OUTB = ON, VOUTn = 1V to 3V 4
Dynamic current consumption IDDdyn 3 mA OUTR,OUTG,OUTB = OFF, DO = open 4
Thermal resistance junction-to-ambient Rth(j-a) 79.2 190 ℃/W 4
Power dissipation PD 1.15 W Ta=25°C 4
DIN clock rate Fosc 800 KHz VDD=5.0V 4
OUT PWM output frequency FOUT 6.5 7 7.5 KHz OUTR, OUTG, OUTB 4
Propagation delay DIN to DOUT tPLZ 200 ns DIN to DOUT 4
Propagation delay tPZL 100 ns CL = 15pF, RL = 10KΩ 4
Fall time TTHZ 80 μs CL = 300pF, OUTR, OUTG, OUTB 4
Input capacitance CI 15 pF 4
Input 0 code low-level time T0L 150 300 450 ns VDD=5V, GND=0V 5
Input 1 code low-level time T1L 600 750 900 ns VDD=5V, GND=0V 5
Reset code high-level time Treset 140 500 μs 5
Output 0 code low-level time T0L' 340 ns 5
Output 1 code low-level time T1L' 680 ns 5
Bit period (0 or 1 code) T 1200 ns 5

CAD (KiCad official)

  • Symbol: TM1925
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14-150mil (KiCad packages3D, STEP)
  • 3D model files: tm1925-etched.step / tm1925-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1925.step / tm1925.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (11 pp, sha256 9158b371a72122c4, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF