main
Ray
Publish 0.1.0
4740248
TM1925
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-14-150mil
TM1925 from TM(Shenzhen Titan Micro Elec), in a SOP-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V, and 6 to 24 V is supported through a series resistor. |
| 2 | NC | unconnected | No connection (listed as 空脚 in the pin function table), so the pin is left unconnected. |
| 3 | DO | output | Data output that re-transmits the DIN data stream to the next cascaded chip after the first 24×3 bits are received; VOH is VDD−0.5 V minimum at IOH = −6 mA and VOL is 0.4 V maximum at IOL = 10 mA. |
| 4 | OUTR3 | output | Red channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 5 | OUTG3 | output | Green channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 6 | OUTB3 | output | Blue channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 7 | GND | power_in | System ground; all voltages are specified relative to this pin. |
| 8 | OUTR2 | output | Red channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 9 | OUTG2 | output | Green channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 10 | OUTB2 | output | Blue channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 11 | OUTR1 | output | Red channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 12 | OUTG1 | output | Green channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 13 | OUTB1 | output | Blue channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 14 | DIN | input | Serial data input with a VIH minimum of 3.5 V and VIL maximum of 1.35 V at VDD = 5 V, and an input voltage range of −0.5 to VDD+0.4 V when a 1 kΩ series resistor is used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-14-150mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | -0.4 | 7 | V | 3 | ||
| Input voltage range DIN | Vin | -0.4 | V | DIN | 3 | ||
| Output current DC OUTR, OUTG, OUTB | Iout | 19 | 21 | mA | 3 | ||
| Output voltage range OUTR, OUTG, OUTB | Vout | -0.4 | 30 | V | 3 | ||
| DIN clock rate range | Fosc | 400 | 900 | KHz | DIN | 3 | |
| Operating temperature range | Topr | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstg | -55 | 150 | ℃ | 3 | ||
| ESD Human Body Model (HBM) | 3000 | V | 3 | ||||
| ESD Machine Model (MM) | 200 | V | 3 | ||||
| Logic supply voltage | VDD | 4.5 | 5 | 5.5 | V | 3 | |
| DIN input voltage range | VDIN | -0.5 | V | VDD=5V, DIN series 1K resistor | 3 | ||
| DO output voltage range | VDO | -0.5 | V | VDD=5V, DIN series 1K resistor | 3 | ||
| OUT output voltage range | VOUT | -0.5 | 24 | V | OUT=OFF | 3 | |
| Operating temperature range | TA | -40 | 85 | ℃ | 3 | ||
| Operating junction temperature range | TJ | -40 | 125 | ℃ | 3 | ||
| Low-level output voltage DO | VOL | 0.4 | V | IOL=10mA: DO | 4 | ||
| High-level input voltage | VIH | 3.5 | V | VDD=5.0V | 4 | ||
| Low-level input voltage | VIL | 0 | 1.35 | V | VDD=5.0V | 4 | |
| High-level output current DO | IOH | 1 | mA | VDD=5.0V, SDO=5.0V | 4 | ||
| Low-level output current DO | IOL | 10 | mA | VDD=5.0V, SDO=1.0V | 4 | ||
| Input current DIN | Iin | -1 | 1 | μA | DIN connected to VDD or GND | 4 | |
| Logic supply current (VDD) | Icco | 1.2 | 3 | 4.2 | mA | OUTR,OUTG,OUTB,DIN,DO = open | 4 |
| Constant output current range | Iolc | 19 | 20 | 21 | mA | OUTR,OUTG,OUTB = 3.0V | 4 |
| Output leakage current | Iolkg | 0 | 0.3 | μA | OUTR,OUTG,OUTB = OFF | 4 | |
| OUT PWM period | Tpwm | 135 | 140 | 145 | μs | OUT pulled up by resistor | 4 |
| Constant current error (channel to channel) | ΔIolco | -3 | 3 | % | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 | |
| Constant current error (chip to chip) | ΔIolc1 | -6 | 6 | % | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 | |
| Line regulation | ΔIolc2 | -1 | 0.5 | 1 | %/V | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 |
| Load regulation | ΔIolc3 | -3 | 1 | 3 | %/V | OUTR,OUTG,OUTB = ON, VOUTn = 1V to 3V | 4 |
| Dynamic current consumption | IDDdyn | 3 | mA | OUTR,OUTG,OUTB = OFF, DO = open | 4 | ||
| Thermal resistance junction-to-ambient | Rth(j-a) | 79.2 | 190 | ℃/W | 4 | ||
| Power dissipation | PD | 1.15 | W | Ta=25°C | 4 | ||
| DIN clock rate | Fosc | 800 | KHz | VDD=5.0V | 4 | ||
| OUT PWM output frequency | FOUT | 6.5 | 7 | 7.5 | KHz | OUTR, OUTG, OUTB | 4 |
| Propagation delay DIN to DOUT | tPLZ | 200 | ns | DIN to DOUT | 4 | ||
| Propagation delay | tPZL | 100 | ns | CL = 15pF, RL = 10KΩ | 4 | ||
| Fall time | TTHZ | 80 | μs | CL = 300pF, OUTR, OUTG, OUTB | 4 | ||
| Input capacitance | CI | 15 | pF | 4 | |||
| Input 0 code low-level time | T0L | 150 | 300 | 450 | ns | VDD=5V, GND=0V | 5 |
| Input 1 code low-level time | T1L | 600 | 750 | 900 | ns | VDD=5V, GND=0V | 5 |
| Reset code high-level time | Treset | 140 | 500 | μs | 5 | ||
| Output 0 code low-level time | T0L' | 340 | ns | 5 | |||
| Output 1 code low-level time | T1L' | 680 | ns | 5 | |||
| Bit period (0 or 1 code) | T | 1200 | ns | 5 |
CAD (KiCad official)
- Symbol:
TM1925 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14-150mil (KiCad packages3D, STEP)
- 3D model files:
tm1925-etched.step/tm1925-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1925.step/tm1925.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (11 pp, sha256
9158b371a72122c4, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM1925
**TM(Shenzhen Titan Micro Elec)** · LED Drivers · SOP-14-150mil
TM1925 from TM(Shenzhen Titan Micro Elec), in a SOP-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V, and 6 to 24 V is supported through a series resistor. |
| 2 | NC | unconnected | No connection (listed as 空脚 in the pin function table), so the pin is left unconnected. |
| 3 | DO | output | Data output that re-transmits the DIN data stream to the next cascaded chip after the first 24×3 bits are received; VOH is VDD−0.5 V minimum at IOH = −6 mA and VOL is 0.4 V maximum at IOL = 10 mA. |
| 4 | OUTR3 | output | Red channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 5 | OUTG3 | output | Green channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 6 | OUTB3 | output | Blue channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 7 | GND | power_in | System ground; all voltages are specified relative to this pin. |
| 8 | OUTR2 | output | Red channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 9 | OUTG2 | output | Green channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 10 | OUTB2 | output | Blue channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 11 | OUTR1 | output | Red channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 12 | OUTG1 | output | Green channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 13 | OUTB1 | output | Blue channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum. |
| 14 | DIN | input | Serial data input with a VIH minimum of 3.5 V and VIL maximum of 1.35 V at VDD = 5 V, and an input voltage range of −0.5 to VDD+0.4 V when a 1 kΩ series resistor is used. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-14-150mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | -0.4 | | 7 | V | | 3 |
| Input voltage range DIN | Vin | -0.4 | | | V | DIN | 3 |
| Output current DC OUTR, OUTG, OUTB | Iout | 19 | | 21 | mA | | 3 |
| Output voltage range OUTR, OUTG, OUTB | Vout | -0.4 | | 30 | V | | 3 |
| DIN clock rate range | Fosc | 400 | | 900 | KHz | DIN | 3 |
| Operating temperature range | Topr | -40 | | 85 | ℃ | | 3 |
| Storage temperature range | Tstg | -55 | | 150 | ℃ | | 3 |
| ESD Human Body Model (HBM) | | | | 3000 | V | | 3 |
| ESD Machine Model (MM) | | | | 200 | V | | 3 |
| Logic supply voltage | VDD | 4.5 | 5 | 5.5 | V | | 3 |
| DIN input voltage range | VDIN | -0.5 | | | V | VDD=5V, DIN series 1K resistor | 3 |
| DO output voltage range | VDO | -0.5 | | | V | VDD=5V, DIN series 1K resistor | 3 |
| OUT output voltage range | VOUT | -0.5 | | 24 | V | OUT=OFF | 3 |
| Operating temperature range | TA | -40 | | 85 | ℃ | | 3 |
| Operating junction temperature range | TJ | -40 | | 125 | ℃ | | 3 |
| Low-level output voltage DO | VOL | | | 0.4 | V | IOL=10mA: DO | 4 |
| High-level input voltage | VIH | 3.5 | | | V | VDD=5.0V | 4 |
| Low-level input voltage | VIL | 0 | | 1.35 | V | VDD=5.0V | 4 |
| High-level output current DO | IOH | 1 | | | mA | VDD=5.0V, SDO=5.0V | 4 |
| Low-level output current DO | IOL | 10 | | | mA | VDD=5.0V, SDO=1.0V | 4 |
| Input current DIN | Iin | -1 | | 1 | μA | DIN connected to VDD or GND | 4 |
| Logic supply current (VDD) | Icco | 1.2 | 3 | 4.2 | mA | OUTR,OUTG,OUTB,DIN,DO = open | 4 |
| Constant output current range | Iolc | 19 | 20 | 21 | mA | OUTR,OUTG,OUTB = 3.0V | 4 |
| Output leakage current | Iolkg | 0 | | 0.3 | μA | OUTR,OUTG,OUTB = OFF | 4 |
| OUT PWM period | Tpwm | 135 | 140 | 145 | μs | OUT pulled up by resistor | 4 |
| Constant current error (channel to channel) | ΔIolco | -3 | | 3 | % | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 |
| Constant current error (chip to chip) | ΔIolc1 | -6 | | 6 | % | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 |
| Line regulation | ΔIolc2 | -1 | 0.5 | 1 | %/V | OUTR,OUTG,OUTB = ON, VOUTn = 1V | 4 |
| Load regulation | ΔIolc3 | -3 | 1 | 3 | %/V | OUTR,OUTG,OUTB = ON, VOUTn = 1V to 3V | 4 |
| Dynamic current consumption | IDDdyn | | | 3 | mA | OUTR,OUTG,OUTB = OFF, DO = open | 4 |
| Thermal resistance junction-to-ambient | Rth(j-a) | | 79.2 | 190 | ℃/W | | 4 |
| Power dissipation | PD | | | 1.15 | W | Ta=25°C | 4 |
| DIN clock rate | Fosc | | 800 | | KHz | VDD=5.0V | 4 |
| OUT PWM output frequency | FOUT | 6.5 | 7 | 7.5 | KHz | OUTR, OUTG, OUTB | 4 |
| Propagation delay DIN to DOUT | tPLZ | | | 200 | ns | DIN to DOUT | 4 |
| Propagation delay | tPZL | | | 100 | ns | CL = 15pF, RL = 10KΩ | 4 |
| Fall time | TTHZ | | | 80 | μs | CL = 300pF, OUTR, OUTG, OUTB | 4 |
| Input capacitance | CI | | | 15 | pF | | 4 |
| Input 0 code low-level time | T0L | 150 | 300 | 450 | ns | VDD=5V, GND=0V | 5 |
| Input 1 code low-level time | T1L | 600 | 750 | 900 | ns | VDD=5V, GND=0V | 5 |
| Reset code high-level time | Treset | 140 | | 500 | μs | | 5 |
| Output 0 code low-level time | T0L' | | 340 | | ns | | 5 |
| Output 1 code low-level time | T1L' | | 680 | | ns | | 5 |
| Bit period (0 or 1 code) | T | | 1200 | | ns | | 5 |
## CAD (KiCad official)
- Symbol: `TM1925`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOP-14-150mil (KiCad packages3D, STEP)
- 3D model files: `tm1925-etched.step` / `tm1925-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm1925.step` / `tm1925.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm1925-datasheet.pdf) (11 pp, sha256 `9158b371a72122c4`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm1925-datasheet.pdf)