main
Ray Publish 0.1.0 4740248
{
  "slug": "tm1925",
  "version": "0.1.0",
  "type": "component",
  "description": "TM(Shenzhen Titan Micro Elec) LED Drivers, SOP-14-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "tm1925",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tm1925.kicad_sym",
    "tm1925.kicad_mod",
    "tm1925.glb",
    "tm1925.step",
    "tm1925.lbr",
    "docs/hero.png",
    "docs/tm1925-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tm1925-hero.glb",
    "tm1925-hero.overlay.json",
    "tm1925-etched.glb"
  ],
  "component": {
    "mpn": "TM1925",
    "manufacturer": "TM(Shenzhen Titan Micro Elec)",
    "package": "SOP-14-150mil",
    "pin_count": 14,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6f1c77305281fbf5c4118b55adea74c4.pdf",
    "parts": {
      "symbol": "tm1925.kicad_sym",
      "footprint": "tm1925.kicad_mod",
      "model_3d": "tm1925-hero.glb",
      "model_3d_plain": "tm1925-etched.glb",
      "model_3d_step": "tm1925-etched.step",
      "model_3d_step_plain": "tm1925.step",
      "lbr": "tm1925.lbr"
    },
    "distributor_links": {
      "lcsc": "C5174540"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T01:17:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V, and 6 to 24 V is supported through a series resistor."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection (listed as 空脚 in the pin function table), so the pin is left unconnected."
      },
      {
        "number": "3",
        "name": "DO",
        "type": "output",
        "description": "Data output that re-transmits the DIN data stream to the next cascaded chip after the first 24×3 bits are received; VOH is VDD−0.5 V minimum at IOH = −6 mA and VOL is 0.4 V maximum at IOL = 10 mA."
      },
      {
        "number": "4",
        "name": "OUTR3",
        "type": "output",
        "description": "Red channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "5",
        "name": "OUTG3",
        "type": "output",
        "description": "Green channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "6",
        "name": "OUTB3",
        "type": "output",
        "description": "Blue channel 3 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "System ground; all voltages are specified relative to this pin."
      },
      {
        "number": "8",
        "name": "OUTR2",
        "type": "output",
        "description": "Red channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "9",
        "name": "OUTG2",
        "type": "output",
        "description": "Green channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "10",
        "name": "OUTB2",
        "type": "output",
        "description": "Blue channel 2 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "11",
        "name": "OUTR1",
        "type": "output",
        "description": "Red channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "12",
        "name": "OUTG1",
        "type": "output",
        "description": "Green channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "13",
        "name": "OUTB1",
        "type": "output",
        "description": "Blue channel 1 PWM constant-current output, rated 20 mA typical (19 to 21 mA) with an output voltage limit of −0.4 to +30 V absolute maximum."
      },
      {
        "number": "14",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input with a VIH minimum of 3.5 V and VIL maximum of 1.35 V at VDD = 5 V, and an input voltage range of −0.5 to VDD+0.4 V when a 1 kΩ series resistor is used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-number-to-position mapping comes from the pin function table on page 2. The top-view pin dia; Pin descriptions for OUT pins combine the absolute maximum output voltage (−0.4 to +30 V, page 3) wi; The datasheet gives no separate pinout for the DIP14 variant beyond the same pin table, so the SOP-1"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0491,
        "at": "2026-11-05T01:17:33"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6f1c77305281fbf5c4118b55adea74c4.pdf",
        "pages": 11,
        "sha256": "9158b371a72122c4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tm1925.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tm1925-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f4217b5fdaee9621edd658ee5a7aa0b9dc4f7d1057164dc0108aaa1a3fb8a2ff",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOP14",
      "source_page": 10,
      "D": {
        "nom_mm": 8.56,
        "range_mm": [
          8.36,
          8.76
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.55,
        "range_mm": [
          1.35,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tm1925.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}