main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv75201pdsqt: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv75201pdsqt-etched.glb Publish 0.1.0 · Ray
tlv75201pdsqt-etched.step tlv75201pdsqt: factory component page (tier=lcsc) · Ray
tlv75201pdsqt-hero.glb tlv75201pdsqt: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv75201pdsqt-hero.overlay.json Publish 0.1.0 · Ray
tlv75201pdsqt.glb Publish 0.1.0 · Ray
tlv75201pdsqt.kicad_mod Publish 0.1.0 · Ray
tlv75201pdsqt.kicad_sym Publish 0.1.0 · Ray
tlv75201pdsqt.lbr Publish 0.1.0 · Ray
tlv75201pdsqt.step Publish 0.1.0 · Ray

TLV75201PDSQT

Texas Instruments · Linear Voltage Regulators (LDO) · WSON-10-EP(2x2)

TLV75201PDSQT from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB1 input Input to the channel 1 control loop error amplifier, used with an external resistor divider to set the channel 1 output voltage (0.55 V to 5.5 V range).
2 GND power_in Ground pin.
3 EN1 input Channel 1 enable pin; drive greater than VEN1(HI) to turn on the regulator and less than VEN1(LO) to put the LDO into shutdown mode.
4 GND power_in Ground pin.
5 EN2 input Channel 2 enable pin; drive greater than VEN1(HI) to turn on the regulator and less than VEN2(LO) to put the LDO into shutdown mode.
6 IN2 power_in Channel 2 input supply (1.5 V to 6.0 V); use at least the recommended 1 µF ceramic capacitor to ground placed close to the device.
7 FB2 input Input to the channel 2 control loop error amplifier, used with an external resistor divider to set the channel 2 output voltage (0.55 V to 5.5 V range).
8 OUT2 power_out Channel 2 regulated output pin; a capacitor to ground is required for stability (recommended 1 µF to 220 µF, minimum derated 0.47 µF).
9 IN1 power_in Channel 1 input supply (1.5 V to 6.0 V); use at least the recommended 1 µF ceramic capacitor to ground placed close to the device.
10 OUT1 power_out Channel 1 regulated output pin; a capacitor to ground is required for stability (recommended 1 µF to 220 µF, minimum derated 0.47 µF).
11 Thermal Pad passive Thermal pad; connect to a large area GND plane for improved thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2x2)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VIN -0.3 6.5 V 4
Enable voltage VEN -0.3 6.5 V 4
Feedback voltage VFB -0.3 2 V 4
Output voltage VOUT -0.3 6.3 V VIN + 0.3 V or 6.0 V, whichever is smaller 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4
Input voltage VIN 1.5 6 V 4
Output voltage VOUT 0.55 5.5 V 4
Output current IOUT 0 1 A 4
Input capacitor CIN 1 μF 4
Output capacitor COUT 1 220 μF Minimum derated capacitance of 0.47 μF required for stability 4
Enable voltage VEN 0 6 V 4
Enable toggle frequency fEN 10 kHz 4
Junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 74.6 °C/W DSQ (WSON) 10 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 90.5 °C/W 4
Junction-to-board thermal resistance RθJB 39.7 °C/W 4
Junction-to-top characterization parameter ψJT 3.8 °C/W 4
Junction-to-board characterization parameter ψJB 39.7 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 17 °C/W 4
Output accuracy -0.5 0.5 % TJ = 25°C 5
Output accuracy over temperature -1.5 1.5 % -40°C ≤ TJ ≤ +125°C; VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V 5
Feedback voltage VFBx 0.55 V TJ = 25°C 5
Line regulation 2 mV VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V 5
Load regulation 0.03 V/A 0.1 mA ≤ IOUT ≤ 1 A, VIN = VOUT + 0.5 V 5
Ground current IGND 10 25 31 µA IOUT = 0 mA, TJ = 25°C 5
Ground current over temperature IGND 35 µA IOUT = 0 mA, -40°C ≤ TJ ≤ +125°C 5
Shutdown current ISHDN 0.1 1 µA VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V 5
Feedback pin current IFB 0.01 0.1 µA 5
Output current limit ICL 1.22 1.54 1.83 A VOUT = 0.9 x VOUT(NOM), VOUT ≥ 1.5 V 5
Short-circuit current limit ISC 670 850 mA VOUT = 0 V 5
Dropout voltage 0.65 V ≤ VOUT < 0.8 V VDO 896 1050 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 0.8 V ≤ VOUT < 0.9 V VDO 765 920 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 0.9 V ≤ VOUT < 1.0 V VDO 700 850 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 1.0 V ≤ VOUT < 1.2 V VDO 600 750 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 1.2 V ≤ VOUT < 1.5 V VDO 464 585 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 1.5 V ≤ VOUT < 1.8 V VDO 332 440 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 1.8 V ≤ VOUT < 2.5 V VDO 264 360 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 2.5 V ≤ VOUT < 3.3 V VDO 193 270 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
Dropout voltage 3.3 V ≤ VOUT ≤ 5.5 V VDO 161 225 mV IOUT = 1 A, VOUT = 0.95 × VOUT(NOM) 5
UVLO rising VUVLO 1.21 1.33 1.47 V VIN rising 5
UVLO falling VUVLO 1.17 1.29 1.42 V VIN falling 5
UVLO hysteresis VUVLO,HYST 45 mV VIN hysteresis 5
Startup time tSTR 500 700 µs From EN low-to-high transition to VOUT = VOUT(NOM) x 95% 5
EN pin high voltage VENx(HI) 1 V 5
EN pin low voltage VENx(LO) 0.3 V 5
Enable pin current IENx 10 nA VIN = VEN = 6.0 V 5
Pulldown resistance RPULLDOWN 95 Ω VIN = 6.0 V 5
PSRR PSRR 50 dB VIN = VOUT(NOM) + 1 V, IOUT = 50 mA, f = 1 kHz 5
Output noise voltage Vn 53 µVRMS BW = 10 Hz to 100 kHz, VOUT = 0.9 V 5
Thermal shutdown TSD 170 °C Shutdown, temperature increasing 5

CAD (KiCad official)

  • Symbol: TLV75201PDSQT
  • Footprint: Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm
  • 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv75201pdsqt-etched.step / tlv75201pdsqt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv75201pdsqt.step / tlv75201pdsqt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 51fb9203a23738df, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF