main
Ray
Publish 0.1.0
059ec60
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213
{
"slug": "tlv75201pdsqt",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Linear Voltage Regulators (LDO), WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"tlv75201pdsqt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tlv75201pdsqt.kicad_sym",
"tlv75201pdsqt.kicad_mod",
"tlv75201pdsqt.glb",
"tlv75201pdsqt.step",
"tlv75201pdsqt.lbr",
"docs/hero.png",
"docs/tlv75201pdsqt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tlv75201pdsqt-hero.glb",
"tlv75201pdsqt-hero.overlay.json",
"tlv75201pdsqt-etched.glb"
],
"component": {
"mpn": "TLV75201PDSQT",
"manufacturer": "Texas Instruments",
"package": "WSON-10-EP(2x2)",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tlv752",
"parts": {
"symbol": "tlv75201pdsqt.kicad_sym",
"footprint": "tlv75201pdsqt.kicad_mod",
"model_3d": "tlv75201pdsqt-hero.glb",
"model_3d_plain": "tlv75201pdsqt-etched.glb",
"model_3d_step": "tlv75201pdsqt-etched.step",
"model_3d_step_plain": "tlv75201pdsqt.step",
"lbr": "tlv75201pdsqt.lbr"
},
"distributor_links": {
"lcsc": "C2870243",
"digikey": "296-TLV75201PDSQTTR-ND",
"mouser": "595-TLV75201PDSQT"
},
"distributor_check": {
"checked_at": "2026-10-26T19:11:44Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-TLV75201PDSQTTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TLV75201PDSQT",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "FB1",
"type": "input",
"description": "Input to the channel 1 control loop error amplifier, used with an external resistor divider to set the channel 1 output voltage (0.55 V to 5.5 V range)."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "3",
"name": "EN1",
"type": "input",
"description": "Channel 1 enable pin; drive greater than VEN1(HI) to turn on the regulator and less than VEN1(LO) to put the LDO into shutdown mode."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "5",
"name": "EN2",
"type": "input",
"description": "Channel 2 enable pin; drive greater than VEN1(HI) to turn on the regulator and less than VEN2(LO) to put the LDO into shutdown mode."
},
{
"number": "6",
"name": "IN2",
"type": "power_in",
"description": "Channel 2 input supply (1.5 V to 6.0 V); use at least the recommended 1 µF ceramic capacitor to ground placed close to the device."
},
{
"number": "7",
"name": "FB2",
"type": "input",
"description": "Input to the channel 2 control loop error amplifier, used with an external resistor divider to set the channel 2 output voltage (0.55 V to 5.5 V range)."
},
{
"number": "8",
"name": "OUT2",
"type": "power_out",
"description": "Channel 2 regulated output pin; a capacitor to ground is required for stability (recommended 1 µF to 220 µF, minimum derated 0.47 µF)."
},
{
"number": "9",
"name": "IN1",
"type": "power_in",
"description": "Channel 1 input supply (1.5 V to 6.0 V); use at least the recommended 1 µF ceramic capacitor to ground placed close to the device."
},
{
"number": "10",
"name": "OUT1",
"type": "power_out",
"description": "Channel 1 regulated output pin; a capacitor to ground is required for stability (recommended 1 µF to 220 µF, minimum derated 0.47 µF)."
},
{
"number": "11",
"name": "Thermal Pad",
"type": "passive",
"description": "Thermal pad; connect to a large area GND plane for improved thermal performance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Datasheet pin table does not assign a number to the thermal pad (listed as 'Pad'); '11' used as a pl; EN2 description in the datasheet refers to VEN1(HI) rather than VEN2(HI), likely a typo in the sourc"
],
"pages_sent": 7,
"cost_usd": 0.0808,
"at": "2026-10-26T19:11:32"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tlv752",
"pages": 31,
"sha256": "51fb9203a23738df",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tlv75201pdsqt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
1.975,
0.8
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f2001b3f9a6ae3d0c8b7e19aea57daac7f0bb7d40364983cd7bb958958273a6d",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tlv75201pdsqt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
1.975,
0.8
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cc84ebdbe9d9dee2db0f1b4021af048f4a22f94cd77cdab1281c12e5875167e9",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}