Generated by kicad-footprint-generator · KiCad file format 20260206
TLD5190QV
Infineon Technologies · LED Drivers · VQFN-48-EP(7x7)
TLD5190QV from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | n.c. | unconnected | Not connected; tie to AGND on the layout. |
| 2 | HSGD1 | output | High-side gate driver output 1 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN1 and connects to the gate of the external switching MOSFET. |
| 3 | BST1 | bidirectional | Bootstrap capacitor pin for internal biasing and high-side drive of HSGD1; bypass to SWN1 with a capacitor close to the pin and do not leave it open. |
| 4 | SWN1 | bidirectional | Switch node 1 swings from a diode voltage drop below ground up to VIN. |
| 5 | PGND1 | power_in | Power ground 1 for the power potential; connect externally close to the chip. |
| 6 | LSGD1 | output | Low-side gate driver output 1 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET. |
| 7 | LSGD2 | output | Low-side gate driver output 2 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET. |
| 8 | PGND2 | power_in | Power ground 2 for the power potential; connect externally close to the chip. |
| 9 | SWN2 | bidirectional | Switch node 2 swings from ground up to a diode voltage drop above VOUT. |
| 10 | BST2 | bidirectional | Bootstrap capacitor pin for internal biasing and high-side drive of HSGD2; bypass to SWN2 with a capacitor close to the pin and do not leave it open. |
| 11 | HSGD2 | output | High-side gate driver output 2 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN2 and connects to the gate of the external switching MOSFET. |
| 12 | n.c. | unconnected | Not connected; no function in the application. |
| 13 | FBH | input | Output current feedback positive, non-inverting (+) input. |
| 14 | FBL | input | Output current feedback negative, inverting (-) input. |
| 15 | n.c. | unconnected | Not connected; no function in the application. |
| 16 | IOUTMON | output | Output current monitor producing 200 mV + 8 times VFBH-FBL, equal to 1.4 V at VFBH-FBL = 150 mV. |
| 17 | SWCS | input | Inductor current measurement non-inverting (+) input; route as a differential net with SGND. |
| 18 | SGND | power_in | Inductor current sense inverting (-) input; route as a differential net with SWCS. |
| 19 | COMP | output | Compensation network pin; connect an R and C network for stability and phase margin adjustment. |
| 20 | VFB | input | Voltage loop feedback pin intended to set output protection functions. |
| 21 | VREF | power_out | Voltage reference output supplying an accurate 2 V for analog dimming and LED temperature compensation; bypass with 100 nF close to the pin and do not leave it open. |
| 22 | SET | input | Analog current sense adjustment pin; a voltage between 0.2 V and 1.5 V adjusts ILED or VOUT in a linear relation. |
| 23 | TEST1 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 24 | PWMI | input | Digital PWM control input for 5 V or 3.3 V logic, with integrated pull-down. |
| 25 | TEST2 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 26 | VSS | power_in | Digital GPIO ground for the GPIO pins. |
| 27 | CLKOUT | output | Switching oscillator clock output used to supply the SYNC inputs of other DC/DC devices. |
| 28 | TEST3 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 29 | TEST4 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 30 | TEST5 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 31 | TEST6 | passive | Test pin for Infineon end-of-line test; connect to GND in the application. |
| 32 | EF2 | output | Open-drain error flag 2 is pulled LOW when an open load, overvoltage or overtemperature occurs. |
| 33 | EF1 | output | Open-drain error flag 1 is pulled LOW when an output short to GND or overtemperature occurs. |
| 34 | SYNC | input | Synchronization input for an external clock signal, with integrated pull-down. |
| 35 | FREQ | input | Frequency select input; connect an external resistor to GND to set the switching frequency. |
| 36 | INOVLO | input | Input overvoltage protection pin that defines an upper VIN threshold and switches the device off on overvoltage; must not be left open. |
| 37 | SPREAD_SPECTRUM | input | Enables and disables the spread spectrum function for EMC performance, with integrated pull-down. |
| 38 | SOFT_START | output | Soft-start configuration pin; connect a capacitor CSOFT_START to GND to fix the soft start ramp time. |
| 39 | IINMON | output | Input current monitor output producing 20 times VIIN1-IIN2, equal to 1 V at VIIN1-IIN2 = 50 mV. |
| 40 | AGND | power_in | Analog ground; ground reference for the device. |
| 41 | EN/INUVLO | input | Enable and input undervoltage lockout pin for low current consumption mode with an external undervoltage threshold; must not be left open and has integrated pull-down. |
| 42 | IIN1 | input | Input current monitor positive, non-inverting (+) input; connect to VIN if the input current monitor is not needed. |
| 43 | IIN2 | input | Input current monitor negative, inverting (-) input; connect to VIN if the input current monitor is not needed. |
| 44 | VIN | power_in | Power supply voltage for internal biasing; absolute maximum rating VVIN is -0.3 V to 60 V. |
| 45 | n.c. | unconnected | Not connected; tie to AGND on the layout. |
| 46 | IVCC | power_out | Internal LDO output used for internal biasing and gate driver supply; bypass with a capacitor close to the pin and do not leave it open. |
| 47 | IVCC_EXT | input | External LDO input to alternatively supply the gate drivers; must not be left open, and connect to IVCC to use the internal LDO. |
| 48 | n.c. | unconnected | Not connected; tie to AGND on the layout. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | VQFN-48-EP(7x7) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Input Voltage | VVIN | -0.3 | 60 | V | 8 | ||
| Internal Linear Voltage Regulator Output voltage | VIVCC | -0.3 | 6 | V | 8 | ||
| External Linear Voltage Regulator Input voltage | VIVCC_EXT | -0.3 | 6 | V | 8 | ||
| Voltage reference output | VREF | -0.3 | 3.6 | V | 8 | ||
| SWN1, SWN2 switching node voltage | VSWN1,2 | -1 | 60 | V | 8 | ||
| Bootstrap voltage (BST1-SWN1), (BST2-SWN2) | VBST1,2-SWN1,2 | -0.3 | 6 | V | 8 | ||
| BST1, BST2 Bootstrap voltage related to GND | VBST1,2 | -0.3 | 65 | V | 8 | ||
| IIN1, IIN2 Input Current monitor voltage | VIIN1,2 | -0.3 | 60 | V | 8 | ||
| FBH, FBL Feedback Error Amplifier voltage | VFBH,FBL | -0.3 | 60 | V | 9 | ||
| Device enable/input undervoltage lockout | VEN/INUVLO | -0.3 | 60 | V | 9 | ||
| Junction Temperature (functional range) | Tj | -40 | 150 | °C | 10 | ||
| Device Extended Supply Voltage Range | VVIN | 4.5 | 40 | V | Not subject to production test, specified by design | 10 | |
| Device Nominal Supply Voltage Range | VVIN | 8 | 36 | V | 10 | ||
| Power Stage Voltage Range | VPOW | 4.5 | 55 | V | Not subject to production test, specified by design | 10 | |
| Input Voltage Startup | VVIN(ON) | 4.7 | V | VIN increasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA | 15 | ||
| Input Undervoltage switch OFF | VVIN(OFF) | 4.5 | V | VIN decreasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA | 15 | ||
| Device operating current | IVIN(ACTIVE) | 4.4 | 6 | mA | ACTIVE mode; CLKOUT freq. 300 KHz; VPWMI = 0 V | 15 | |
| VIN Sleep mode supply current | IVIN(SLEEP) | 1.5 | µA | VEN/INUVLO = 0 V; VIN = 13.5 V; VIVCC = VIVCC_EXT = 0 V | 15 | ||
| EN/INUVLO Input Undervoltage falling Threshold | VEN/INUVLOth | 1.6 | 1.75 | 1.9 | V | 15 | |
| EN/INUVLO input Current LOW | IEN/INUVLO(LOW) | 0.45 | 0.89 | 1.34 | µA | VEN/INUVLO = 0.8 V | 15 |
| EN/INUVLO input Current HIGH | IEN/INUVLO(HIGH) | 1.1 | 2.2 | 3.3 | µA | VEN/INUVLO = 2 V | 15 |
| SLEEP mode to ACTIVE time | tACTIVE | 0.7 | ms | VIVCC = VIVCC_EXT; CIVCC = 10 µF; VIN = 13.5 V | 15 | ||
| V(FBH-FBL) threshold | V(FBH-FBL) | 145.5 | 150 | 154.5 | mV | VSET = 2 V | 25 |
| V(FBH-FBL) threshold @ analog dimming 10% | V(FBH-FBL)_10 | 10 | 15 | 20 | mV | VSET = 0.32 V | 25 |
| Output Monitor Voltage | VIOUTMON | 1.33 | 1.4 | 1.47 | V | VFBH - FBL = 150 mV | 25 |
| Maximum BOOST Duty Cycle | DBOOST_MAX | 89 | 91 | 93 | % | fsw = 300 kHZ | 25 |
| Input Current Sense threshold | VIIN1-IIN2 | 46 | 50 | 54 | mV | 25 | |
| Input current Monitor Voltage | VIINMON | 0.95 | 1 | 1.05 | V | VIIN1 - IIN2 = 50 mV; VIIN1 = VVIN(ON) to 55 V | 25 |
| Switch Peak Over Current Threshold - BOOST | VSWCS_boost | 40 | 50 | 60 | mV | 25 | |
| Switch Peak Over Current Threshold - BUCK | VSWCS_buck | -60 | -50 | -40 | mV | 25 | |
| Gate Driver undervoltage threshold | VBST1,2-VSWN1,2_UVth | 3.4 | 4 | V | VBST1,2 - VSWN1,2 decreasing | 26 | |
| Oscillator Switching Frequency | fSW | 285 | 300 | 315 | kHz | Tj = 25°C; RFREQ = 37.4 kΩ | 26 |
| SYNC Frequency | fSYNC | 200 | 700 | kHz | 26 | ||
| SYNC Turn On Threshold | VSYNC,ON | 2 | V | 26 | |||
| SYNC Turn Off Threshold | VSYNC,OFF | 0.8 | V | 26 | |||
| HSGD1,2 Gate Driver peak sourcing current | IHSGD1,2_SRC | 380 | mA | VHSGD1,2 - VSWN1,2 = 1 V to 4 V; VBST1,2 - VSWN1,2 = 5 V | 26 | ||
| HSGD1,2 Gate Driver peak sinking current | IHSGD1,2_SNK | 410 | mA | VHSGD1,2 - VSWN1,2 = 4 V to 1 V; VBST1,2 - VSWN1,2 = 5 V | 26 | ||
| PWMI Turn On Threshold | VPWMI,ON | 2 | V | 30 | |||
| PWMI Turn Off Threshold | VPWMI,OFF | 0.8 | V | 30 | |||
| Source current on SET Pin | ISET_source | 1 | µA | VSET = 0.2 V to 1.4 V | 33 | ||
| IVCC Output Voltage | VIVCC | 4.8 | 5 | 5.2 | V | VIN = 13.5 V; 0.1 mA ≤ IIVCC ≤ 50 mA | 35 |
| Output Current Limitation | ILIM | 70 | 90 | 110 | mA | VIVCC = 4 V | 35 |
| Drop out Voltage (VIN - VIVCC) | VDR | 200 | 350 | mV | VIN = 5 V; IIVCC = 10 mA | 35 | |
| IVCC_EXT Undervoltage Reset switch OFF Threshold | VIVCC_EXT_RTH,d | 3.7 | 3.9 | 4.1 | V | VIVCC_EXT decreasing | 35 |
| IVCC Undervoltage Reset switch OFF Threshold | VIVCC_RTH,d | 3.7 | 3.9 | 4.1 | V | VIVCC decreasing | 35 |
| VREF voltage | VREF | 1.94 | 2 | 2.06 | V | 0 ≤ IVREF ≤ 200 µA | 35 |
| Short to GND threshold | VVFB_S2G | 0.53 | 0.563 | 0.59 | V | VVFB decreasing | 42 |
| Over Temperature Shutdown | Tj,SD | 160 | 175 | 190 | °C | 42 | |
| VFB Over Voltage Feedback Threshold | VVFB_OVTH | 1.42 | 1.46 | 1.5 | V | 42 | |
| Output Over Voltage Feedback Hysteresis | VVFB_OVTH,HYS | 25 | 40 | 58 | mV | Output Voltage decreasing | 42 |
| Open Load rising Threshold | VVFB_OL,rise | 1.29 | 1.34 | 1.39 | V | VFBH-FBL = 0 V | 42 |
| Open Load reference Voltage VFBH-FBL | VFBH_FBL_OL | 15 | 22.5 | mV | VFB = 1.4 V | 42 | |
| Open Load falling Threshold | VVFB_OL,fall | 1.23 | 1.28 | 1.33 | V | VFBH-FBL = 0 V | 42 |
| Input Overvoltage rising Threshold | VINOVLOth | 1.9 | 2 | 2.1 | V | 42 | |
| Input Overvoltage Threshold Hysteresis | VINOVLO(hyst) | 18 | 40 | 62 | mV | 42 | |
| SPREAD_SPECTRUM Turn On Threshold | VSPREAD_SPECTRUM,ON | 2 | V | 47 | |||
| SPREAD_SPECTRUM Turn Off Threshold | VSPREAD_SPECTRUM,OFF | 0.8 | V | 47 | |||
| L level output voltage (CLKOUT) | VCLKOUT(L) | 0 | 0.4 | V | ICLKOUT = -2 mA | 47 | |
| Junction to Case thermal resistance | RthJC | 0.9 | K/W | Ta = 25°C; IC dissipating 1 W; cold plate setup | 11 | ||
| Junction to Ambient thermal resistance | RthJA | 25 | K/W | JEDEC 2s2p; Ta = 25°C; IC dissipating 1 W | 11 |
CAD (KiCad official)
- Symbol:
TLD5190QV - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
tld5190qv-etched.step/tld5190qv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tld5190qv.step/tld5190qv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (59 pp, sha256
d8c4b2c9af0b84e5, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).