main
History Download
Ray Publish 0.1.0 60eb887

TLD5190QV

Infineon Technologies · LED Drivers · VQFN-48-EP(7x7)

TLD5190QV from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 n.c. unconnected Not connected; tie to AGND on the layout.
2 HSGD1 output High-side gate driver output 1 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN1 and connects to the gate of the external switching MOSFET.
3 BST1 bidirectional Bootstrap capacitor pin for internal biasing and high-side drive of HSGD1; bypass to SWN1 with a capacitor close to the pin and do not leave it open.
4 SWN1 bidirectional Switch node 1 swings from a diode voltage drop below ground up to VIN.
5 PGND1 power_in Power ground 1 for the power potential; connect externally close to the chip.
6 LSGD1 output Low-side gate driver output 1 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET.
7 LSGD2 output Low-side gate driver output 2 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET.
8 PGND2 power_in Power ground 2 for the power potential; connect externally close to the chip.
9 SWN2 bidirectional Switch node 2 swings from ground up to a diode voltage drop above VOUT.
10 BST2 bidirectional Bootstrap capacitor pin for internal biasing and high-side drive of HSGD2; bypass to SWN2 with a capacitor close to the pin and do not leave it open.
11 HSGD2 output High-side gate driver output 2 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN2 and connects to the gate of the external switching MOSFET.
12 n.c. unconnected Not connected; no function in the application.
13 FBH input Output current feedback positive, non-inverting (+) input.
14 FBL input Output current feedback negative, inverting (-) input.
15 n.c. unconnected Not connected; no function in the application.
16 IOUTMON output Output current monitor producing 200 mV + 8 times VFBH-FBL, equal to 1.4 V at VFBH-FBL = 150 mV.
17 SWCS input Inductor current measurement non-inverting (+) input; route as a differential net with SGND.
18 SGND power_in Inductor current sense inverting (-) input; route as a differential net with SWCS.
19 COMP output Compensation network pin; connect an R and C network for stability and phase margin adjustment.
20 VFB input Voltage loop feedback pin intended to set output protection functions.
21 VREF power_out Voltage reference output supplying an accurate 2 V for analog dimming and LED temperature compensation; bypass with 100 nF close to the pin and do not leave it open.
22 SET input Analog current sense adjustment pin; a voltage between 0.2 V and 1.5 V adjusts ILED or VOUT in a linear relation.
23 TEST1 passive Test pin for Infineon end-of-line test; connect to GND in the application.
24 PWMI input Digital PWM control input for 5 V or 3.3 V logic, with integrated pull-down.
25 TEST2 passive Test pin for Infineon end-of-line test; connect to GND in the application.
26 VSS power_in Digital GPIO ground for the GPIO pins.
27 CLKOUT output Switching oscillator clock output used to supply the SYNC inputs of other DC/DC devices.
28 TEST3 passive Test pin for Infineon end-of-line test; connect to GND in the application.
29 TEST4 passive Test pin for Infineon end-of-line test; connect to GND in the application.
30 TEST5 passive Test pin for Infineon end-of-line test; connect to GND in the application.
31 TEST6 passive Test pin for Infineon end-of-line test; connect to GND in the application.
32 EF2 output Open-drain error flag 2 is pulled LOW when an open load, overvoltage or overtemperature occurs.
33 EF1 output Open-drain error flag 1 is pulled LOW when an output short to GND or overtemperature occurs.
34 SYNC input Synchronization input for an external clock signal, with integrated pull-down.
35 FREQ input Frequency select input; connect an external resistor to GND to set the switching frequency.
36 INOVLO input Input overvoltage protection pin that defines an upper VIN threshold and switches the device off on overvoltage; must not be left open.
37 SPREAD_SPECTRUM input Enables and disables the spread spectrum function for EMC performance, with integrated pull-down.
38 SOFT_START output Soft-start configuration pin; connect a capacitor CSOFT_START to GND to fix the soft start ramp time.
39 IINMON output Input current monitor output producing 20 times VIIN1-IIN2, equal to 1 V at VIIN1-IIN2 = 50 mV.
40 AGND power_in Analog ground; ground reference for the device.
41 EN/INUVLO input Enable and input undervoltage lockout pin for low current consumption mode with an external undervoltage threshold; must not be left open and has integrated pull-down.
42 IIN1 input Input current monitor positive, non-inverting (+) input; connect to VIN if the input current monitor is not needed.
43 IIN2 input Input current monitor negative, inverting (-) input; connect to VIN if the input current monitor is not needed.
44 VIN power_in Power supply voltage for internal biasing; absolute maximum rating VVIN is -0.3 V to 60 V.
45 n.c. unconnected Not connected; tie to AGND on the layout.
46 IVCC power_out Internal LDO output used for internal biasing and gate driver supply; bypass with a capacitor close to the pin and do not leave it open.
47 IVCC_EXT input External LDO input to alternatively supply the gate drivers; must not be left open, and connect to IVCC to use the internal LDO.
48 n.c. unconnected Not connected; tie to AGND on the layout.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package VQFN-48-EP(7x7)
Category Display Modules / LED Drivers / Display Drivers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Input Voltage VVIN -0.3 60 V 8
Internal Linear Voltage Regulator Output voltage VIVCC -0.3 6 V 8
External Linear Voltage Regulator Input voltage VIVCC_EXT -0.3 6 V 8
Voltage reference output VREF -0.3 3.6 V 8
SWN1, SWN2 switching node voltage VSWN1,2 -1 60 V 8
Bootstrap voltage (BST1-SWN1), (BST2-SWN2) VBST1,2-SWN1,2 -0.3 6 V 8
BST1, BST2 Bootstrap voltage related to GND VBST1,2 -0.3 65 V 8
IIN1, IIN2 Input Current monitor voltage VIIN1,2 -0.3 60 V 8
FBH, FBL Feedback Error Amplifier voltage VFBH,FBL -0.3 60 V 9
Device enable/input undervoltage lockout VEN/INUVLO -0.3 60 V 9
Junction Temperature (functional range) Tj -40 150 °C 10
Device Extended Supply Voltage Range VVIN 4.5 40 V Not subject to production test, specified by design 10
Device Nominal Supply Voltage Range VVIN 8 36 V 10
Power Stage Voltage Range VPOW 4.5 55 V Not subject to production test, specified by design 10
Input Voltage Startup VVIN(ON) 4.7 V VIN increasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA 15
Input Undervoltage switch OFF VVIN(OFF) 4.5 V VIN decreasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA 15
Device operating current IVIN(ACTIVE) 4.4 6 mA ACTIVE mode; CLKOUT freq. 300 KHz; VPWMI = 0 V 15
VIN Sleep mode supply current IVIN(SLEEP) 1.5 µA VEN/INUVLO = 0 V; VIN = 13.5 V; VIVCC = VIVCC_EXT = 0 V 15
EN/INUVLO Input Undervoltage falling Threshold VEN/INUVLOth 1.6 1.75 1.9 V 15
EN/INUVLO input Current LOW IEN/INUVLO(LOW) 0.45 0.89 1.34 µA VEN/INUVLO = 0.8 V 15
EN/INUVLO input Current HIGH IEN/INUVLO(HIGH) 1.1 2.2 3.3 µA VEN/INUVLO = 2 V 15
SLEEP mode to ACTIVE time tACTIVE 0.7 ms VIVCC = VIVCC_EXT; CIVCC = 10 µF; VIN = 13.5 V 15
V(FBH-FBL) threshold V(FBH-FBL) 145.5 150 154.5 mV VSET = 2 V 25
V(FBH-FBL) threshold @ analog dimming 10% V(FBH-FBL)_10 10 15 20 mV VSET = 0.32 V 25
Output Monitor Voltage VIOUTMON 1.33 1.4 1.47 V VFBH - FBL = 150 mV 25
Maximum BOOST Duty Cycle DBOOST_MAX 89 91 93 % fsw = 300 kHZ 25
Input Current Sense threshold VIIN1-IIN2 46 50 54 mV 25
Input current Monitor Voltage VIINMON 0.95 1 1.05 V VIIN1 - IIN2 = 50 mV; VIIN1 = VVIN(ON) to 55 V 25
Switch Peak Over Current Threshold - BOOST VSWCS_boost 40 50 60 mV 25
Switch Peak Over Current Threshold - BUCK VSWCS_buck -60 -50 -40 mV 25
Gate Driver undervoltage threshold VBST1,2-VSWN1,2_UVth 3.4 4 V VBST1,2 - VSWN1,2 decreasing 26
Oscillator Switching Frequency fSW 285 300 315 kHz Tj = 25°C; RFREQ = 37.4 kΩ 26
SYNC Frequency fSYNC 200 700 kHz 26
SYNC Turn On Threshold VSYNC,ON 2 V 26
SYNC Turn Off Threshold VSYNC,OFF 0.8 V 26
HSGD1,2 Gate Driver peak sourcing current IHSGD1,2_SRC 380 mA VHSGD1,2 - VSWN1,2 = 1 V to 4 V; VBST1,2 - VSWN1,2 = 5 V 26
HSGD1,2 Gate Driver peak sinking current IHSGD1,2_SNK 410 mA VHSGD1,2 - VSWN1,2 = 4 V to 1 V; VBST1,2 - VSWN1,2 = 5 V 26
PWMI Turn On Threshold VPWMI,ON 2 V 30
PWMI Turn Off Threshold VPWMI,OFF 0.8 V 30
Source current on SET Pin ISET_source 1 µA VSET = 0.2 V to 1.4 V 33
IVCC Output Voltage VIVCC 4.8 5 5.2 V VIN = 13.5 V; 0.1 mA ≤ IIVCC ≤ 50 mA 35
Output Current Limitation ILIM 70 90 110 mA VIVCC = 4 V 35
Drop out Voltage (VIN - VIVCC) VDR 200 350 mV VIN = 5 V; IIVCC = 10 mA 35
IVCC_EXT Undervoltage Reset switch OFF Threshold VIVCC_EXT_RTH,d 3.7 3.9 4.1 V VIVCC_EXT decreasing 35
IVCC Undervoltage Reset switch OFF Threshold VIVCC_RTH,d 3.7 3.9 4.1 V VIVCC decreasing 35
VREF voltage VREF 1.94 2 2.06 V 0 ≤ IVREF ≤ 200 µA 35
Short to GND threshold VVFB_S2G 0.53 0.563 0.59 V VVFB decreasing 42
Over Temperature Shutdown Tj,SD 160 175 190 °C 42
VFB Over Voltage Feedback Threshold VVFB_OVTH 1.42 1.46 1.5 V 42
Output Over Voltage Feedback Hysteresis VVFB_OVTH,HYS 25 40 58 mV Output Voltage decreasing 42
Open Load rising Threshold VVFB_OL,rise 1.29 1.34 1.39 V VFBH-FBL = 0 V 42
Open Load reference Voltage VFBH-FBL VFBH_FBL_OL 15 22.5 mV VFB = 1.4 V 42
Open Load falling Threshold VVFB_OL,fall 1.23 1.28 1.33 V VFBH-FBL = 0 V 42
Input Overvoltage rising Threshold VINOVLOth 1.9 2 2.1 V 42
Input Overvoltage Threshold Hysteresis VINOVLO(hyst) 18 40 62 mV 42
SPREAD_SPECTRUM Turn On Threshold VSPREAD_SPECTRUM,ON 2 V 47
SPREAD_SPECTRUM Turn Off Threshold VSPREAD_SPECTRUM,OFF 0.8 V 47
L level output voltage (CLKOUT) VCLKOUT(L) 0 0.4 V ICLKOUT = -2 mA 47
Junction to Case thermal resistance RthJC 0.9 K/W Ta = 25°C; IC dissipating 1 W; cold plate setup 11
Junction to Ambient thermal resistance RthJA 25 K/W JEDEC 2s2p; Ta = 25°C; IC dissipating 1 W 11

CAD (KiCad official)

  • Symbol: TLD5190QV
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: tld5190qv-etched.step / tld5190qv-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tld5190qv.step / tld5190qv.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (59 pp, sha256 d8c4b2c9af0b84e5, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF