main
Ray Publish 0.1.0 60eb887
{
  "slug": "tld5190qv",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies LED Drivers, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "tld5190qv",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tld5190qv.kicad_sym",
    "tld5190qv.kicad_mod",
    "tld5190qv.glb",
    "tld5190qv.step",
    "tld5190qv.lbr",
    "docs/hero.png",
    "docs/tld5190qv-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tld5190qv-hero.glb",
    "tld5190qv-hero.overlay.json",
    "tld5190qv-etched.glb"
  ],
  "component": {
    "mpn": "TLD5190QV",
    "manufacturer": "Infineon Technologies",
    "package": "VQFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ad415c189c9ace25a042a97965e5f43e.pdf",
    "parts": {
      "symbol": "tld5190qv.kicad_sym",
      "footprint": "tld5190qv.kicad_mod",
      "model_3d": "tld5190qv-hero.glb",
      "model_3d_plain": "tld5190qv-etched.glb",
      "model_3d_step": "tld5190qv-etched.step",
      "model_3d_step_plain": "tld5190qv.step",
      "lbr": "tld5190qv.lbr"
    },
    "distributor_links": {
      "lcsc": "C539655"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:32:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "n.c.",
        "type": "unconnected",
        "description": "Not connected; tie to AGND on the layout."
      },
      {
        "number": "2",
        "name": "HSGD1",
        "type": "output",
        "description": "High-side gate driver output 1 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN1 and connects to the gate of the external switching MOSFET."
      },
      {
        "number": "3",
        "name": "BST1",
        "type": "bidirectional",
        "description": "Bootstrap capacitor pin for internal biasing and high-side drive of HSGD1; bypass to SWN1 with a capacitor close to the pin and do not leave it open."
      },
      {
        "number": "4",
        "name": "SWN1",
        "type": "bidirectional",
        "description": "Switch node 1 swings from a diode voltage drop below ground up to VIN."
      },
      {
        "number": "5",
        "name": "PGND1",
        "type": "power_in",
        "description": "Power ground 1 for the power potential; connect externally close to the chip."
      },
      {
        "number": "6",
        "name": "LSGD1",
        "type": "output",
        "description": "Low-side gate driver output 1 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET."
      },
      {
        "number": "7",
        "name": "LSGD2",
        "type": "output",
        "description": "Low-side gate driver output 2 drives the low-side n-channel MOSFET between GND and VIVCC_EXT and connects to the gate of the external switching MOSFET."
      },
      {
        "number": "8",
        "name": "PGND2",
        "type": "power_in",
        "description": "Power ground 2 for the power potential; connect externally close to the chip."
      },
      {
        "number": "9",
        "name": "SWN2",
        "type": "bidirectional",
        "description": "Switch node 2 swings from ground up to a diode voltage drop above VOUT."
      },
      {
        "number": "10",
        "name": "BST2",
        "type": "bidirectional",
        "description": "Bootstrap capacitor pin for internal biasing and high-side drive of HSGD2; bypass to SWN2 with a capacitor close to the pin and do not leave it open."
      },
      {
        "number": "11",
        "name": "HSGD2",
        "type": "output",
        "description": "High-side gate driver output 2 drives the top n-channel MOSFET with VIVCC_EXT superimposed on SWN2 and connects to the gate of the external switching MOSFET."
      },
      {
        "number": "12",
        "name": "n.c.",
        "type": "unconnected",
        "description": "Not connected; no function in the application."
      },
      {
        "number": "13",
        "name": "FBH",
        "type": "input",
        "description": "Output current feedback positive, non-inverting (+) input."
      },
      {
        "number": "14",
        "name": "FBL",
        "type": "input",
        "description": "Output current feedback negative, inverting (-) input."
      },
      {
        "number": "15",
        "name": "n.c.",
        "type": "unconnected",
        "description": "Not connected; no function in the application."
      },
      {
        "number": "16",
        "name": "IOUTMON",
        "type": "output",
        "description": "Output current monitor producing 200 mV + 8 times VFBH-FBL, equal to 1.4 V at VFBH-FBL = 150 mV."
      },
      {
        "number": "17",
        "name": "SWCS",
        "type": "input",
        "description": "Inductor current measurement non-inverting (+) input; route as a differential net with SGND."
      },
      {
        "number": "18",
        "name": "SGND",
        "type": "power_in",
        "description": "Inductor current sense inverting (-) input; route as a differential net with SWCS."
      },
      {
        "number": "19",
        "name": "COMP",
        "type": "output",
        "description": "Compensation network pin; connect an R and C network for stability and phase margin adjustment."
      },
      {
        "number": "20",
        "name": "VFB",
        "type": "input",
        "description": "Voltage loop feedback pin intended to set output protection functions."
      },
      {
        "number": "21",
        "name": "VREF",
        "type": "power_out",
        "description": "Voltage reference output supplying an accurate 2 V for analog dimming and LED temperature compensation; bypass with 100 nF close to the pin and do not leave it open."
      },
      {
        "number": "22",
        "name": "SET",
        "type": "input",
        "description": "Analog current sense adjustment pin; a voltage between 0.2 V and 1.5 V adjusts ILED or VOUT in a linear relation."
      },
      {
        "number": "23",
        "name": "TEST1",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "24",
        "name": "PWMI",
        "type": "input",
        "description": "Digital PWM control input for 5 V or 3.3 V logic, with integrated pull-down."
      },
      {
        "number": "25",
        "name": "TEST2",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "26",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital GPIO ground for the GPIO pins."
      },
      {
        "number": "27",
        "name": "CLKOUT",
        "type": "output",
        "description": "Switching oscillator clock output used to supply the SYNC inputs of other DC/DC devices."
      },
      {
        "number": "28",
        "name": "TEST3",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "29",
        "name": "TEST4",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "30",
        "name": "TEST5",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "31",
        "name": "TEST6",
        "type": "passive",
        "description": "Test pin for Infineon end-of-line test; connect to GND in the application."
      },
      {
        "number": "32",
        "name": "EF2",
        "type": "output",
        "description": "Open-drain error flag 2 is pulled LOW when an open load, overvoltage or overtemperature occurs."
      },
      {
        "number": "33",
        "name": "EF1",
        "type": "output",
        "description": "Open-drain error flag 1 is pulled LOW when an output short to GND or overtemperature occurs."
      },
      {
        "number": "34",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronization input for an external clock signal, with integrated pull-down."
      },
      {
        "number": "35",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency select input; connect an external resistor to GND to set the switching frequency."
      },
      {
        "number": "36",
        "name": "INOVLO",
        "type": "input",
        "description": "Input overvoltage protection pin that defines an upper VIN threshold and switches the device off on overvoltage; must not be left open."
      },
      {
        "number": "37",
        "name": "SPREAD_SPECTRUM",
        "type": "input",
        "description": "Enables and disables the spread spectrum function for EMC performance, with integrated pull-down."
      },
      {
        "number": "38",
        "name": "SOFT_START",
        "type": "output",
        "description": "Soft-start configuration pin; connect a capacitor CSOFT_START to GND to fix the soft start ramp time."
      },
      {
        "number": "39",
        "name": "IINMON",
        "type": "output",
        "description": "Input current monitor output producing 20 times VIIN1-IIN2, equal to 1 V at VIIN1-IIN2 = 50 mV."
      },
      {
        "number": "40",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; ground reference for the device."
      },
      {
        "number": "41",
        "name": "EN/INUVLO",
        "type": "input",
        "description": "Enable and input undervoltage lockout pin for low current consumption mode with an external undervoltage threshold; must not be left open and has integrated pull-down."
      },
      {
        "number": "42",
        "name": "IIN1",
        "type": "input",
        "description": "Input current monitor positive, non-inverting (+) input; connect to VIN if the input current monitor is not needed."
      },
      {
        "number": "43",
        "name": "IIN2",
        "type": "input",
        "description": "Input current monitor negative, inverting (-) input; connect to VIN if the input current monitor is not needed."
      },
      {
        "number": "44",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply voltage for internal biasing; absolute maximum rating VVIN is -0.3 V to 60 V."
      },
      {
        "number": "45",
        "name": "n.c.",
        "type": "unconnected",
        "description": "Not connected; tie to AGND on the layout."
      },
      {
        "number": "46",
        "name": "IVCC",
        "type": "power_out",
        "description": "Internal LDO output used for internal biasing and gate driver supply; bypass with a capacitor close to the pin and do not leave it open."
      },
      {
        "number": "47",
        "name": "IVCC_EXT",
        "type": "input",
        "description": "External LDO input to alternatively supply the gate drivers; must not be left open, and connect to IVCC to use the internal LDO."
      },
      {
        "number": "48",
        "name": "n.c.",
        "type": "unconnected",
        "description": "Not connected; tie to AGND on the layout."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet calls the exposed pad a heatspreading connection only and does not state it is GND; ty; Test pins are labelled only as Infineon end-of-line test pins to be connected to GND; no electrical ; Pins 1, 12, 15, 45 and 48 are listed as n.c. in the pin table. The tie-to-AGND instruction is stated",
          "exposed pad 49 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint",
          "1/49 pins cited to the wrong page (name found elsewhere): ['8:PGND2@p5']"
        ],
        "pages_sent": 17,
        "cost_usd": 0.1103,
        "at": "2026-10-28T21:32:17"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/ad415c189c9ace25a042a97965e5f43e.pdf",
        "pages": 59,
        "sha256": "d8c4b2c9af0b84e5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tld5190qv.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tld5190qv-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9ba947e374ec10665f12cd8b397a7abc538f30b99e34e9aee9d817a7d577b7ff",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PG-VQFN-48-31",
      "source_page": 54,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.9,
        "range_mm": [
          null,
          0.9
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tld5190qv.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}