Generated by kicad-footprint-generator · KiCad file format 20260206
TJA1081TS
NXP Semicon · Interface - Specialized · SSOP-16-208mil
TJA1081TS from NXP Semicon, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INH | output | Inhibit output for switching an external voltage regulator; pin INH is HIGH in Normal, Receive-only and Standby modes and floating in Sleep mode. |
| 2 | EN | input | Enable input for mode control, enabled when HIGH, with an internal pull-down; VIH(EN) is 0.7VIO to 5.5 V. |
| 3 | VIO | power_in | Supply voltage for VIO voltage level adaptation, operating range 2.2 V to 5.25 V (absolute maximum 5.5 V). |
| 4 | TXD | input | Transmit data input with an internal pull-down; in normal-power modes VIH(TXD) is 0.7VIO to VIO + 0.3 V. |
| 5 | TXEN | input | Transmitter enable input; when HIGH the transmitter is disabled, with an internal pull-up. |
| 6 | RXD | output | Receive data output, which is driven from the bus after bus activity is detected and is held HIGH when the bus is idle (absolute maximum VIO + 0.3 V). |
| 7 | BGE | input | Bus guardian enable input; when LOW the transmitter is disabled, with an internal pull-down. |
| 8 | STBN | input | Standby input; low-power mode when LOW, with an internal pull-down. |
| 9 | RXEN | output | Receive data enable output; LOW when bus activity is detected. |
| 10 | ERRN | output | Error diagnoses output; LOW when an error is detected, and also the serial interface for reading the status register with pin EN as clock. |
| 11 | VBAT | power_in | Battery supply voltage, operating range 6.5 V to 60 V (absolute maximum 60 V, no time limit). |
| 12 | WAKE | input | Local wake-up input with internal pull-up or pull-down depending on the voltage at pin WAKE; detection threshold Vth(det)(WAKE) is 2.5 V to 4.5 V in low-power mode. |
| 13 | GND | power_in | Ground; all voltages in the datasheet are referenced to GND. |
| 14 | BM | bidirectional | Bus line minus; VBM is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD. |
| 15 | BP | bidirectional | Bus line plus; VBP is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD. |
| 16 | VCC | power_in | Supply voltage (+5 V), operating range 4.75 V to 5.25 V (absolute maximum 5.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | SSOP-16-208mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Battery supply voltage | VBAT | -0.3 | 60 | V | no time limit | 19 | |
| Supply voltage VCC | VCC | -0.3 | 5.5 | V | no time limit | 19 | |
| Supply voltage on pin VIO | VIO | -0.3 | 5.5 | V | no time limit | 19 | |
| Voltage on pin BP | VBP | -60 | 60 | V | no time limit | 19 | |
| Voltage on pin BM | VBM | -60 | 60 | V | no time limit | 19 | |
| Storage temperature | Tstg | -55 | 150 | °C | 19 | ||
| Virtual junction temperature | Tvj | -40 | 150 | °C | in accordance with IEC 60747-1 | 19 | |
| Electrostatic discharge voltage HBM on pins BP and BM | VESD | -8 | 8 | kV | HBM on pins BP and BM to ground; C = 100 pF; R = 1.5 kΩ | 19 | |
| Electrostatic discharge voltage HBM any other pin | VESD | -4 | 4 | kV | HBM at any other pin | 19 | |
| Thermal resistance junction to ambient | Rth(j-a) | 118 | K/W | in free air | 20 | ||
| Battery supply operating range | VBAT | 6.5 | 60 | V | operating range | 5 | |
| VCC operating range | VCC | 4.75 | 5.25 | V | operating range | 5 | |
| VIO operating range | VIO | 2.2 | 5.25 | V | operating range | 5 | |
| Battery supply current, low-power modes | IBAT | 55 | µA | low-power modes; no load on pin INH | 20 | ||
| Battery supply current, normal-power modes | IBAT | 1 | mA | normal-power modes | 20 | ||
| Undervoltage detection voltage on pin VBAT | Vuvd(VBAT) | 2.75 | 4.5 | V | 20 | ||
| VCC supply current, Normal mode, receive-only | ICC | 15 | mA | Normal mode; VBGE = 0 V; VTXEN = VIO; Receive-only mode | 20 | ||
| VCC supply current, Normal mode, transmitting | ICC | 37 | mA | Normal mode; VBGE = VIO; VTXEN = 0 V | 20 | ||
| Undervoltage detection voltage on pin VCC | Vuvd(VCC) | 2.75 | 3.7 | 4.5 | V | (VBAT ≥ 5.5 V AND VIO ≥ 4.75 V) OR VBAT ≥ 6.5 V | 20 |
| VIO supply current, Normal and Receive-only | IIO | 1000 | µA | Normal and Receive-only modes; VTXD = VIO | 20 | ||
| Undervoltage detection voltage on pin VIO | Vuvd(VIO) | 1 | 1.5 | 2 | V | 20 | |
| Undervoltage recovery voltage on pin VIO | Vuvr(VIO) | 1 | 1.6 | 2.2 | V | 20 | |
| Undervoltage hysteresis voltage on pin VIO | Vuvhys(VIO) | 25 | 200 | mV | VBAT > 5.5 V | 20 | |
| Differential HIGH-level output voltage | VOH(dif) | 600 | 850 | 1500 | mV | 40 Ω ≤ Rbus ≤ 55 Ω; VCC = 5 V; Cbus = 100 pF | 22 |
| Differential HIGH-level input voltage | VIH(dif) | 150 | 210 | 300 | mV | normal-power modes | 22 |
| Activity detection differential input voltage | Vi(dif)det(act) | 150 | 210 | 300 | mV | normal-power modes | 22 |
| Short-circuit output current on pin BP | IO(sc) | 35 | mA | on pin BP; 0 V ≤ VBP ≤ 60 V | 22 | ||
| Input resistance on pin BP | Ri(BP) | 10 | 18.5 | 40 | kΩ | idle level; Rbus = ∞ | 22 |
| Differential input resistance between BP and BM | Ri(dif)(BP-BM) | 20 | 37 | 80 | kΩ | idle level; Rbus = ∞ | 22 |
| Input capacitance on pin BP | Ci(BP) | 8 | 15 | pF | not tested; VBP = 100 mV; f = 5 MHz | 23 | |
| Medium warning junction temperature | Tj(warn)(medium) | 155 | 165 | 175 | °C | VBAT > 5.5 V | 23 |
| High disable junction temperature | Tj(dis)(high) | 180 | 190 | 200 | °C | VBAT > 5.5 V | 23 |
| Power-on reset detection threshold voltage | Vth(det)POR | 3 | 3.4 | V | 23 | ||
| Power-on reset recovery threshold voltage | Vth(rec)POR | 3.1 | 3.5 | V | 23 | ||
| Power-on reset hysteresis voltage | Vhys(POR) | 100 | 200 | mV | 23 | ||
| Detection threshold voltage on pin WAKE | Vth(det)(WAKE) | 2.5 | 4.5 | V | low-power mode | 23 | |
| Delay time from TXD to bus, DATA_0 | td(TXD-bus) | 50 | ns | Normal mode | 24 | ||
| Delay time from bus to RXD, DATA_0 | td(bus-RXD) | 50 | ns | Normal mode; CRXD = 15 pF | 24 | ||
| Bus differential rise time | tr(dif)(bus) | 5 | 17 | 25 | ns | 10 % to 90 %; Rbus = 45 Ω; Cbus = 100 pF | 24 |
| Bus differential fall time | tf(dif)(bus) | 5 | 17 | 25 | ns | 90 % to 10 %; Rbus = 45 Ω; Cbus = 100 pF | 24 |
| Total wake-up detection time | tdet(wake)tot | 50 | 115 | µs | Standby or Sleep mode | 24 | |
| Go-to-sleep hold time | th(gotosleep) | 20 | 35 | 50 | µs | 25 | |
| Wake-up time on pin WAKE | twake(WAKE) | 5 | 28 | 100 | µs | low-power modes; falling edge on pin WAKE; 6.5 V ≤ VBAT ≤ 27 V | 25 |
CAD (KiCad official)
- Symbol:
TJA1081TS - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
tja1081ts-etched.step/tja1081ts-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tja1081ts.step/tja1081ts.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (37 pp, sha256
54b2388e84213b06, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).