main
Ray Publish 0.1.0 1484ace
{
  "slug": "tja1081ts",
  "version": "0.1.0",
  "type": "component",
  "description": "NXP Semicon Interface - Specialized, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "tja1081ts",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tja1081ts.kicad_sym",
    "tja1081ts.kicad_mod",
    "tja1081ts.glb",
    "tja1081ts.step",
    "tja1081ts.lbr",
    "docs/hero.png",
    "docs/tja1081ts-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tja1081ts-hero.glb",
    "tja1081ts-hero.overlay.json"
  ],
  "component": {
    "mpn": "TJA1081TS",
    "manufacturer": "NXP Semicon",
    "package": "SSOP-16-208mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Interface - Specialized",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/TJA1081TS.pdf",
    "parts": {
      "symbol": "tja1081ts.kicad_sym",
      "footprint": "tja1081ts.kicad_mod",
      "model_3d": "tja1081ts-hero.glb",
      "model_3d_plain": "tja1081ts.glb",
      "model_3d_step": "tja1081ts-etched.step",
      "model_3d_step_plain": "tja1081ts.step",
      "lbr": "tja1081ts.lbr"
    },
    "distributor_links": {
      "lcsc": "C2674398",
      "digikey": "568-8753-2-ND",
      "mouser": "771-TJA1081TS118"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T08:16:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "568-8753-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "771-TJA1081TS118",
        "status": "found",
        "lifecycle": "End of Life"
      },
      "matched_as": "TJA1081TS,118"
    },
    "pins": [
      {
        "number": "1",
        "name": "INH",
        "type": "output",
        "description": "Inhibit output for switching an external voltage regulator; pin INH is HIGH in Normal, Receive-only and Standby modes and floating in Sleep mode."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input for mode control, enabled when HIGH, with an internal pull-down; VIH(EN) is 0.7VIO to 5.5 V."
      },
      {
        "number": "3",
        "name": "VIO",
        "type": "power_in",
        "description": "Supply voltage for VIO voltage level adaptation, operating range 2.2 V to 5.25 V (absolute maximum 5.5 V)."
      },
      {
        "number": "4",
        "name": "TXD",
        "type": "input",
        "description": "Transmit data input with an internal pull-down; in normal-power modes VIH(TXD) is 0.7VIO to VIO + 0.3 V."
      },
      {
        "number": "5",
        "name": "TXEN",
        "type": "input",
        "description": "Transmitter enable input; when HIGH the transmitter is disabled, with an internal pull-up."
      },
      {
        "number": "6",
        "name": "RXD",
        "type": "output",
        "description": "Receive data output, which is driven from the bus after bus activity is detected and is held HIGH when the bus is idle (absolute maximum VIO + 0.3 V)."
      },
      {
        "number": "7",
        "name": "BGE",
        "type": "input",
        "description": "Bus guardian enable input; when LOW the transmitter is disabled, with an internal pull-down."
      },
      {
        "number": "8",
        "name": "STBN",
        "type": "input",
        "description": "Standby input; low-power mode when LOW, with an internal pull-down."
      },
      {
        "number": "9",
        "name": "RXEN",
        "type": "output",
        "description": "Receive data enable output; LOW when bus activity is detected."
      },
      {
        "number": "10",
        "name": "ERRN",
        "type": "output",
        "description": "Error diagnoses output; LOW when an error is detected, and also the serial interface for reading the status register with pin EN as clock."
      },
      {
        "number": "11",
        "name": "VBAT",
        "type": "power_in",
        "description": "Battery supply voltage, operating range 6.5 V to 60 V (absolute maximum 60 V, no time limit)."
      },
      {
        "number": "12",
        "name": "WAKE",
        "type": "input",
        "description": "Local wake-up input with internal pull-up or pull-down depending on the voltage at pin WAKE; detection threshold Vth(det)(WAKE) is 2.5 V to 4.5 V in low-power mode."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all voltages in the datasheet are referenced to GND."
      },
      {
        "number": "14",
        "name": "BM",
        "type": "bidirectional",
        "description": "Bus line minus; VBM is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD."
      },
      {
        "number": "15",
        "name": "BP",
        "type": "bidirectional",
        "description": "Bus line plus; VBP is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage (+5 V), operating range 4.75 V to 5.25 V (absolute maximum 5.5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint says SSOP-16-208mil. The datasheet does not print '208mil'; it gives SSOP16 (SOT338-1) ; Table 1 lists TJA1081TS as the only ordering option, so the SSOP16 pinout applies to this MPN. The p; Pin 1 (INH) is listed as an output in Table 2 but is floating in Sleep mode per Table 3 and Section "
        ],
        "pages_sent": 37,
        "cost_usd": 0.1618,
        "at": "2026-11-13T08:16:13"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/TJA1081TS.pdf",
        "pages": 37,
        "sha256": "54b2388e84213b06",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tja1081ts.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tja1081ts-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6c1b4e8c8c5d09c5dffbe2a059daf77ea2239e5fabbb20cfe1bb4902e9174319",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOT338-1 (SSOP16)",
      "source_page": 29,
      "D": {
        "nom_mm": 6.2,
        "range_mm": [
          6.0,
          6.4
        ]
      },
      "E1": {
        "nom_mm": 5.3,
        "range_mm": [
          5.2,
          5.4
        ]
      },
      "E": {
        "nom_mm": 7.75,
        "range_mm": [
          7.6,
          7.9
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.0,
        "range_mm": [
          null,
          2.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tja1081ts.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}