main
History Download
Ray Publish 0.1.0 1484ace

TJA1081TS

NXP Semicon · Interface - Specialized · SSOP-16-208mil

TJA1081TS from NXP Semicon, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INH output Inhibit output for switching an external voltage regulator; pin INH is HIGH in Normal, Receive-only and Standby modes and floating in Sleep mode.
2 EN input Enable input for mode control, enabled when HIGH, with an internal pull-down; VIH(EN) is 0.7VIO to 5.5 V.
3 VIO power_in Supply voltage for VIO voltage level adaptation, operating range 2.2 V to 5.25 V (absolute maximum 5.5 V).
4 TXD input Transmit data input with an internal pull-down; in normal-power modes VIH(TXD) is 0.7VIO to VIO + 0.3 V.
5 TXEN input Transmitter enable input; when HIGH the transmitter is disabled, with an internal pull-up.
6 RXD output Receive data output, which is driven from the bus after bus activity is detected and is held HIGH when the bus is idle (absolute maximum VIO + 0.3 V).
7 BGE input Bus guardian enable input; when LOW the transmitter is disabled, with an internal pull-down.
8 STBN input Standby input; low-power mode when LOW, with an internal pull-down.
9 RXEN output Receive data enable output; LOW when bus activity is detected.
10 ERRN output Error diagnoses output; LOW when an error is detected, and also the serial interface for reading the status register with pin EN as clock.
11 VBAT power_in Battery supply voltage, operating range 6.5 V to 60 V (absolute maximum 60 V, no time limit).
12 WAKE input Local wake-up input with internal pull-up or pull-down depending on the voltage at pin WAKE; detection threshold Vth(det)(WAKE) is 2.5 V to 4.5 V in low-power mode.
13 GND power_in Ground; all voltages in the datasheet are referenced to GND.
14 BM bidirectional Bus line minus; VBM is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD.
15 BP bidirectional Bus line plus; VBP is limited to -60 V to +60 V and the pin is protected against 8 kV HBM ESD.
16 VCC power_in Supply voltage (+5 V), operating range 4.75 V to 5.25 V (absolute maximum 5.5 V).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SSOP-16-208mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Battery supply voltage VBAT -0.3 60 V no time limit 19
Supply voltage VCC VCC -0.3 5.5 V no time limit 19
Supply voltage on pin VIO VIO -0.3 5.5 V no time limit 19
Voltage on pin BP VBP -60 60 V no time limit 19
Voltage on pin BM VBM -60 60 V no time limit 19
Storage temperature Tstg -55 150 °C 19
Virtual junction temperature Tvj -40 150 °C in accordance with IEC 60747-1 19
Electrostatic discharge voltage HBM on pins BP and BM VESD -8 8 kV HBM on pins BP and BM to ground; C = 100 pF; R = 1.5 kΩ 19
Electrostatic discharge voltage HBM any other pin VESD -4 4 kV HBM at any other pin 19
Thermal resistance junction to ambient Rth(j-a) 118 K/W in free air 20
Battery supply operating range VBAT 6.5 60 V operating range 5
VCC operating range VCC 4.75 5.25 V operating range 5
VIO operating range VIO 2.2 5.25 V operating range 5
Battery supply current, low-power modes IBAT 55 µA low-power modes; no load on pin INH 20
Battery supply current, normal-power modes IBAT 1 mA normal-power modes 20
Undervoltage detection voltage on pin VBAT Vuvd(VBAT) 2.75 4.5 V 20
VCC supply current, Normal mode, receive-only ICC 15 mA Normal mode; VBGE = 0 V; VTXEN = VIO; Receive-only mode 20
VCC supply current, Normal mode, transmitting ICC 37 mA Normal mode; VBGE = VIO; VTXEN = 0 V 20
Undervoltage detection voltage on pin VCC Vuvd(VCC) 2.75 3.7 4.5 V (VBAT ≥ 5.5 V AND VIO ≥ 4.75 V) OR VBAT ≥ 6.5 V 20
VIO supply current, Normal and Receive-only IIO 1000 µA Normal and Receive-only modes; VTXD = VIO 20
Undervoltage detection voltage on pin VIO Vuvd(VIO) 1 1.5 2 V 20
Undervoltage recovery voltage on pin VIO Vuvr(VIO) 1 1.6 2.2 V 20
Undervoltage hysteresis voltage on pin VIO Vuvhys(VIO) 25 200 mV VBAT > 5.5 V 20
Differential HIGH-level output voltage VOH(dif) 600 850 1500 mV 40 Ω ≤ Rbus ≤ 55 Ω; VCC = 5 V; Cbus = 100 pF 22
Differential HIGH-level input voltage VIH(dif) 150 210 300 mV normal-power modes 22
Activity detection differential input voltage Vi(dif)det(act) 150 210 300 mV normal-power modes 22
Short-circuit output current on pin BP IO(sc) 35 mA on pin BP; 0 V ≤ VBP ≤ 60 V 22
Input resistance on pin BP Ri(BP) 10 18.5 40 kΩ idle level; Rbus = ∞ 22
Differential input resistance between BP and BM Ri(dif)(BP-BM) 20 37 80 kΩ idle level; Rbus = ∞ 22
Input capacitance on pin BP Ci(BP) 8 15 pF not tested; VBP = 100 mV; f = 5 MHz 23
Medium warning junction temperature Tj(warn)(medium) 155 165 175 °C VBAT > 5.5 V 23
High disable junction temperature Tj(dis)(high) 180 190 200 °C VBAT > 5.5 V 23
Power-on reset detection threshold voltage Vth(det)POR 3 3.4 V 23
Power-on reset recovery threshold voltage Vth(rec)POR 3.1 3.5 V 23
Power-on reset hysteresis voltage Vhys(POR) 100 200 mV 23
Detection threshold voltage on pin WAKE Vth(det)(WAKE) 2.5 4.5 V low-power mode 23
Delay time from TXD to bus, DATA_0 td(TXD-bus) 50 ns Normal mode 24
Delay time from bus to RXD, DATA_0 td(bus-RXD) 50 ns Normal mode; CRXD = 15 pF 24
Bus differential rise time tr(dif)(bus) 5 17 25 ns 10 % to 90 %; Rbus = 45 Ω; Cbus = 100 pF 24
Bus differential fall time tf(dif)(bus) 5 17 25 ns 90 % to 10 %; Rbus = 45 Ω; Cbus = 100 pF 24
Total wake-up detection time tdet(wake)tot 50 115 µs Standby or Sleep mode 24
Go-to-sleep hold time th(gotosleep) 20 35 50 µs 25
Wake-up time on pin WAKE twake(WAKE) 5 28 100 µs low-power modes; falling edge on pin WAKE; 6.5 V ≤ VBAT ≤ 27 V 25

CAD (KiCad official)

  • Symbol: TJA1081TS
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: tja1081ts-etched.step / tja1081ts-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tja1081ts.step / tja1081ts.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (37 pp, sha256 54b2388e84213b06, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF