main
History Download
Ray Initial commit: component/thvd1424rgtr 0cf0142

THVD1424RGTR

Texas Instruments · RS-485 / RS-422 ICs · VQFN-16(3x3)

THVD1424RGTR from Texas Instruments, in a VQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Logic output for RS485 received data.
2 RE input Receiver enable/disable control input with internal pull-up; receiver disabled by default.
3 DE input Driver enable/disable control input with internal pull-down; driver disabled by default.
4 D input Logic input for RS485 data to transmit with internal pull-up; drives bus high by default if driver enabled.
5 TERM_TX input Control input for enabling/disabling 120 Ω on-chip termination resistor on Y/Z driver output pins with internal pull-down; disabled by default.
6 GND power_in Ground connection; thermal pad should be connected to GND for optimal thermal and electrical performance.
7 TERM_RX input Control input for enabling/disabling 120 Ω on-chip termination resistor on A/B receiver input pins with internal pull-down; disabled by default.
8 SLR input Slew rate control input with internal pull-down; logic high enables 500 kbps slow mode, low or floating enables 20 Mbps fast mode.
9 Y bidirectional RS485 differential bus output/input; non-inverting driver output in full duplex or non-inverting shared output/input in half duplex mode.
10 Z bidirectional RS485 differential bus output/input; inverting driver output in full duplex or inverting shared output/input in half duplex mode.
11 B input RS485 receiver inverting input pin in full duplex mode.
12 A input RS485 receiver non-inverting input pin in full duplex mode.
13 VIO power_in Logic supply voltage input with operating range 1.65 V to 5.5 V.
14 VCC power_in Bus supply voltage input with operating range 3 V to 5.5 V.
15 H/F input Half/full duplex mode control input with internal pull-down; logic low selects full duplex mode (default), logic high selects half duplex mode.
16 NC unconnected No connection; pin is not connected internally.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16(3x3)
Category Interface
Pins 17

CAD (KiCad official)

  • Symbol: THVD1424RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: thvd1424rgtr-etched.step / thvd1424rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); thvd1424rgtr.step / thvd1424rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 6e850d1244379fca, retrieved 2026-09-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF