← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# THVD1424RGTR++**Texas Instruments** · RS-485 / RS-422 ICs · VQFN-16(3x3)++THVD1424RGTR from Texas Instruments, in a VQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | R | output | Logic output for RS485 received data. |+| 2 | RE | input | Receiver enable/disable control input with internal pull-up; receiver disabled by default. |+| 3 | DE | input | Driver enable/disable control input with internal pull-down; driver disabled by default. |+| 4 | D | input | Logic input for RS485 data to transmit with internal pull-up; drives bus high by default if driver enabled. |+| 5 | TERM_TX | input | Control input for enabling/disabling 120 Ω on-chip termination resistor on Y/Z driver output pins with internal pull-down; disabled by default. |+| 6 | GND | power_in | Ground connection; thermal pad should be connected to GND for optimal thermal and electrical performance. |+| 7 | TERM_RX | input | Control input for enabling/disabling 120 Ω on-chip termination resistor on A/B receiver input pins with internal pull-down; disabled by default. |+| 8 | SLR | input | Slew rate control input with internal pull-down; logic high enables 500 kbps slow mode, low or floating enables 20 Mbps fast mode. |+| 9 | Y | bidirectional | RS485 differential bus output/input; non-inverting driver output in full duplex or non-inverting shared output/input in half duplex mode. |+| 10 | Z | bidirectional | RS485 differential bus output/input; inverting driver output in full duplex or inverting shared output/input in half duplex mode. |+| 11 | B | input | RS485 receiver inverting input pin in full duplex mode. |+| 12 | A | input | RS485 receiver non-inverting input pin in full duplex mode. |+| 13 | VIO | power_in | Logic supply voltage input with operating range 1.65 V to 5.5 V. |+| 14 | VCC | power_in | Bus supply voltage input with operating range 3 V to 5.5 V. |+| 15 | H/F | input | Half/full duplex mode control input with internal pull-down; logic low selects full duplex mode (default), logic high selects half duplex mode. |+| 16 | NC | unconnected | No connection; pin is not connected internally. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16(3x3) |+| Category | Interface |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `THVD1424RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16(3x3) (KiCad packages3D, STEP)+- 3D model files: `thvd1424rgtr-etched.step` / `thvd1424rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `thvd1424rgtr.step` / `thvd1424rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/thvd1424.pdf) (36 pp, sha256 `6e850d1244379fca`, retrieved 2026-09-22, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/thvd1424rgtr-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "thvd1424rgtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS-485 / RS-422 ICs, VQFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "thvd1424rgtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "thvd1424rgtr.kicad_sym",+ "thvd1424rgtr.kicad_mod",+ "thvd1424rgtr.glb",+ "thvd1424rgtr.step",+ "thvd1424rgtr.lbr",+ "docs/hero.png",+ "docs/thvd1424rgtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "THVD1424RGTR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-16(3x3)",+ "pin_count": 17,+ "category": "Interface",+ "subcategory": "RS-485 / RS-422 ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/thvd1424.pdf",+ "parts": {+ "symbol": "thvd1424rgtr.kicad_sym",+ "footprint": "thvd1424rgtr.kicad_mod",+ "model_3d": "thvd1424rgtr-etched.glb",+ "model_3d_plain": "thvd1424rgtr.glb",+ "model_3d_step": "thvd1424rgtr-etched.step",+ "model_3d_step_plain": "thvd1424rgtr.step",+ "lbr": "thvd1424rgtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C5359161"+ },+ "pins": [+ {+ "number": "1",+ "name": "R",+ "type": "output",+ "description": "Logic output for RS485 received data."+ },+ {+ "number": "2",+ "name": "RE",+ "type": "input",+ "description": "Receiver enable/disable control input with internal pull-up; receiver disabled by default."+ },+ {+ "number": "3",+ "name": "DE",+ "type": "input",+ "description": "Driver enable/disable control input with internal pull-down; driver disabled by default."+ },+ {+ "number": "4",+ "name": "D",+ "type": "input",+ "description": "Logic input for RS485 data to transmit with internal pull-up; drives bus high by default if driver enabled."+ },+ {+ "number": "5",+ "name": "TERM_TX",+ "type": "input",+ "description": "Control input for enabling/disabling 120 Ω on-chip termination resistor on Y/Z driver output pins with internal pull-down; disabled by default."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground connection; thermal pad should be connected to GND for optimal thermal and electrical performance."+ },+ {+ "number": "7",+ "name": "TERM_RX",+ "type": "input",+ "description": "Control input for enabling/disabling 120 Ω on-chip termination resistor on A/B receiver input pins with internal pull-down; disabled by default."+ },+ {+ "number": "8",+ "name": "SLR",+ "type": "input",+ "description": "Slew rate control input with internal pull-down; logic high enables 500 kbps slow mode, low or floating enables 20 Mbps fast mode."+ },+ {+ "number": "9",+ "name": "Y",+ "type": "bidirectional",+ "description": "RS485 differential bus output/input; non-inverting driver output in full duplex or non-inverting shared output/input in half duplex mode."+ },+ {+ "number": "10",+ "name": "Z",+ "type": "bidirectional",+ "description": "RS485 differential bus output/input; inverting driver output in full duplex or inverting shared output/input in half duplex mode."+ },+ {+ "number": "11",+ "name": "B",+ "type": "input",+ "description": "RS485 receiver inverting input pin in full duplex mode."+ },+ {+ "number": "12",+ "name": "A",+ "type": "input",+ "description": "RS485 receiver non-inverting input pin in full duplex mode."+ },+ {+ "number": "13",+ "name": "VIO",+ "type": "power_in",+ "description": "Logic supply voltage input with operating range 1.65 V to 5.5 V."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Bus supply voltage input with operating range 3 V to 5.5 V."+ },+ {+ "number": "15",+ "name": "H/F",+ "type": "input",+ "description": "Half/full duplex mode control input with internal pull-down; logic low selects full duplex mode (default), logic high selects half duplex mode."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; pin is not connected internally."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 36,+ "cost_usd": 0.365,+ "at": "2026-09-22T22:42:01"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/thvd1424.pdf",+ "pages": 36,+ "sha256": "6e850d1244379fca",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}