Generated by kicad-footprint-generator · KiCad file format 20260206
THS4130IDGNR
Texas Instruments · Differential OpAmps · HVSSOP-8-EP
THS4130IDGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN- | power_in | Negative input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and the differential input voltage absolute maximum is ±1.5 V. |
| 2 | VOCM | input | Common-mode input pin that sets the output common-mode voltage; if left floating it defaults to mid-rail (VCC+ + VCC-)/2, and a 0.1-µF bypass capacitor is recommended to minimize common-mode noise. |
| 3 | VCC+ | power_in | Positive supply voltage pin; the device operates from ±2.5 V to ±15 V dual supply or 5 V to 30 V single supply, with a 33 V absolute maximum between VCC- and VCC+. |
| 4 | VOUT+ | output | Positive output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum. |
| 5 | VOUT- | output | Negative output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum. |
| 6 | VCC- | power_in | Negative supply voltage pin; it is the reference for the power-down threshold and the output common-mode default, and must be kept within the ±2.5 V to ±15 V (or 5 V to 30 V single supply) operating range. |
| 7 | PD | input | Active-low power-down pin on THS4130 only; pull it to VCC- to turn the device off, it is internally pulled up to VCC+ through 250 kΩ if left unconnected, and the device is active when PD is about 1.4 V above VCC-. |
| 8 | VIN+ | power_in | Positive input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and continuous input current is limited to 10 mA. |
| 9 | Thermal Pad | passive | Exposed thermal pad on the DGN (HVSSOP) package, electrically isolated from the die so it can connect to any potential from VCC- to VCC+, and it should be connected to a large copper plane for best thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Operational Amplifier/Comparator |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 33 | V | VCC- to VCC+ | 4 | ||
| Differential input voltage | VID | -1.5 | 1.5 | V | 4 | ||
| Continuous input current | IIN | 10 | mA | 4 | |||
| Output current | IO | 150 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Junction temperature, continuous operation, long-term reliability | TJ | 125 | °C | Continuous operation | 4 | ||
| Ambient temperature, I-suffix | TA | -40 | 85 | °C | I-suffix | 4 | |
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply turn on and turn off dV/dT | dV/dT | 1.7 | V/µs | 4 | |||
| Supply voltage, dual supply | VCC | 2.5 | 15 | V | Dual supply | 4 | |
| Supply voltage, single supply | VCC | 5 | 30 | V | Single supply | 4 | |
| Operating free-air temperature, I-suffix device | TA | -40 | 85 | °C | I-suffix device | 4 | |
| Open-loop gain | AOL | 71 | 78 | dB | TA = 25°C | 5 | |
| Open-loop gain | AOL | 69 | dB | TA = full range | 5 | ||
| Input offset voltage | VOS | 0.2 | 2 | mV | TA = 25°C | 5 | |
| Input offset voltage | VOS | 3 | mV | TA = full range | 5 | ||
| Common-mode input offset voltage | 0.2 | 5.5 | mV | Referred to VOCM | 5 | ||
| Input bias current | IIB | 5 | 15.4 | µA | TA = full range | 5 | |
| Input offset current | IOS | 100 | 500 | nA | TA = full range | 5 | |
| Common-mode rejection ratio | CMRR | 80 | 95 | dB | TA = full range | 6 | |
| Common-mode input voltage range | VICM | -4 | 4.5 | V | 6 | ||
| Output voltage swing | VO | 3.7 | V | VCC = ±5 V, RL = 1 kΩ, TA = 25°C | 6 | ||
| Output voltage swing | VO | 3.6 | V | VCC = ±5 V, RL = 1 kΩ, TA = full range | 6 | ||
| Output voltage swing | VO | 11.5 | 12.4 | V | VCC = ±15 V, RL = 1 kΩ, TA = 25°C | 6 | |
| Output voltage swing | VO | 11.2 | V | VCC = ±15 V, RL = 1 kΩ, TA = full range | 6 | ||
| Output current | IO | 25 | 45 | mA | VCC = 5 V, RL = 7 Ω, TA = 25°C | 6 | |
| Output current | IO | 20 | mA | VCC = 5 V, RL = 7 Ω, TA = full range | 6 | ||
| Output current | IO | 30 | 55 | mA | VCC = ±5 V, RL = 7 Ω, TA = 25°C | 6 | |
| Output current | IO | 28 | mA | VCC = ±5 V, RL = 7 Ω, TA = full range | 6 | ||
| Output current | IO | 65 | 85 | mA | VCC = ±15 V, RL = 7 Ω, TA = 25°C | 6 | |
| Output current | IO | 60 | mA | VCC = ±15 V, RL = 7 Ω, TA = full range | 6 | ||
| Quiescent current | ICC | 10.4 | 15 | mA | VCC = ±5 V, TA = 25°C | 6 | |
| Quiescent current | ICC | 16 | mA | VCC = ±5 V, TA = full range | 6 | ||
| Quiescent current (shutdown), THS4130 only | ICC(SD) | 0.86 | 1.4 | mA | PD = -5 V, TA = 25°C | 6 | |
| Quiescent current (shutdown), THS4130 only | ICC(SD) | 1.5 | mA | PD = -5 V, TA = full range | 6 | ||
| Power-supply rejection ratio (dc) | PSRR | 73 | 98 | dB | TA = +25°C | 6 | |
| Power-supply rejection ratio (dc) | PSRR | 70 | dB | TA = full range | 6 | ||
| Junction-to-ambient thermal resistance, DGN (HVSSOP) | RθJA | 57.6 | °C/W | DGN (HVSSOP) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance, DGN (HVSSOP) | RθJC(top) | 76.3 | °C/W | DGN (HVSSOP) 8 pins | 4 | ||
| Junction-to-board thermal resistance, DGN (HVSSOP) | RθJB | 30 | °C/W | DGN (HVSSOP) 8 pins | 4 | ||
| Junction-to-top characterization parameter, DGN (HVSSOP) | ψJT | 4 | °C/W | DGN (HVSSOP) 8 pins | 4 | ||
| Junction-to-board characterization parameter, DGN (HVSSOP) | ψJB | 29.9 | °C/W | DGN (HVSSOP) 8 pins | 4 | ||
| Junction-to-case (bottom) thermal resistance, DGN (HVSSOP) | RθJC(bot) | 14.3 | °C/W | DGN (HVSSOP) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
THS4130IDGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ths4130idgnr-etched.step/ths4130idgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths4130idgnr.step/ths4130idgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
52843f1a0f5bebf8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).