main
Ray
Publish 0.1.0
d03ee39
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260
{
"slug": "ths4130idgnr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Differential OpAmps, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"operational amplifier-comparator",
"ths4130idgnr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ths4130idgnr.kicad_sym",
"ths4130idgnr.kicad_mod",
"ths4130idgnr.glb",
"ths4130idgnr.step",
"ths4130idgnr.lbr",
"docs/hero.png",
"docs/ths4130idgnr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ths4130idgnr-hero.glb",
"ths4130idgnr-hero.overlay.json",
"ths4130idgnr-etched.glb"
],
"component": {
"mpn": "THS4130IDGNR",
"manufacturer": "Texas Instruments",
"package": "HVSSOP-8-EP",
"pin_count": 9,
"category": "Operational Amplifier/Comparator",
"subcategory": "Differential OpAmps",
"datasheet": "https://www.ti.com/lit/ds/symlink/ths4130.pdf",
"parts": {
"symbol": "ths4130idgnr.kicad_sym",
"footprint": "ths4130idgnr.kicad_mod",
"model_3d": "ths4130idgnr-hero.glb",
"model_3d_plain": "ths4130idgnr-etched.glb",
"model_3d_step": "ths4130idgnr-etched.step",
"model_3d_step_plain": "ths4130idgnr.step",
"lbr": "ths4130idgnr.lbr"
},
"distributor_links": {
"lcsc": "C702037",
"mouser": "595-THS4130IDGNR"
},
"distributor_check": {
"checked_at": "2026-11-10T08:30:00Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 986 calls left today"
},
"mouser": {
"pn": "595-THS4130IDGNR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VIN-",
"type": "power_in",
"description": "Negative input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and the differential input voltage absolute maximum is ±1.5 V."
},
{
"number": "2",
"name": "VOCM",
"type": "input",
"description": "Common-mode input pin that sets the output common-mode voltage; if left floating it defaults to mid-rail (VCC+ + VCC-)/2, and a 0.1-µF bypass capacitor is recommended to minimize common-mode noise."
},
{
"number": "3",
"name": "VCC+",
"type": "power_in",
"description": "Positive supply voltage pin; the device operates from ±2.5 V to ±15 V dual supply or 5 V to 30 V single supply, with a 33 V absolute maximum between VCC- and VCC+."
},
{
"number": "4",
"name": "VOUT+",
"type": "output",
"description": "Positive output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum."
},
{
"number": "5",
"name": "VOUT–",
"type": "output",
"description": "Negative output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum."
},
{
"number": "6",
"name": "VCC-",
"type": "power_in",
"description": "Negative supply voltage pin; it is the reference for the power-down threshold and the output common-mode default, and must be kept within the ±2.5 V to ±15 V (or 5 V to 30 V single supply) operating range."
},
{
"number": "7",
"name": "PD",
"type": "input",
"description": "Active-low power-down pin on THS4130 only; pull it to VCC- to turn the device off, it is internally pulled up to VCC+ through 250 kΩ if left unconnected, and the device is active when PD is about 1.4 V above VCC-."
},
{
"number": "8",
"name": "VIN+",
"type": "power_in",
"description": "Positive input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and continuous input current is limited to 10 mA."
},
{
"number": "9",
"name": "Thermal Pad",
"type": "passive",
"description": "Exposed thermal pad on the DGN (HVSSOP) package, electrically isolated from the die so it can connect to any potential from VCC- to VCC+, and it should be connected to a large copper plane for best thermal performance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 6-1 lists the thermal pad without a pin number. The number 9 comes from the DGN package drawin; Pin 7 is PD on the THS4130 (the MPN in question). On the THS4131 it is NC, so the pinout does not ap; Pin types are assigned as KiCad power_in for supply pins. The datasheet labels VCC+ and VCC- as I/O "
],
"pages_sent": 36,
"cost_usd": 0.1384,
"at": "2026-11-10T08:29:47"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ths4130.pdf",
"pages": 36,
"sha256": "52843f1a0f5bebf8",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "HVSSOP",
"height_mm": 1.0,
"height_basis": "family nominal (no datasheet A read)",
"standoff_mm": 0.1,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.292,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.128,
"lead_thickness_basis": "default for pitch 0.65 mm, height 1 mm (no datasheet c read)"
},
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ths4130idgnr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.91,
3.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "92564f0e5f178bd9ead232efdfa31cdf128af8041c43248cea829f9d1ee67af8",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ths4130idgnr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.91,
3.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9523cf5dafdfe78b2e3de63efbbab70fc160820ed480e1a80a4318e65de677da",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DGN0008H",
"source_page": 30,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
4.75,
5.05
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ths4130idgnr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}