main
History Download
Ray Publish 0.1.0 d03ee39

THS4130IDGNR

Texas Instruments · Differential OpAmps · HVSSOP-8-EP

THS4130IDGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN- power_in Negative input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and the differential input voltage absolute maximum is ±1.5 V.
2 VOCM input Common-mode input pin that sets the output common-mode voltage; if left floating it defaults to mid-rail (VCC+ + VCC-)/2, and a 0.1-µF bypass capacitor is recommended to minimize common-mode noise.
3 VCC+ power_in Positive supply voltage pin; the device operates from ±2.5 V to ±15 V dual supply or 5 V to 30 V single supply, with a 33 V absolute maximum between VCC- and VCC+.
4 VOUT+ output Positive output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum.
5 VOUT- output Negative output pin of the fully differential amplifier; output current is limited to 150 mA absolute maximum.
6 VCC- power_in Negative supply voltage pin; it is the reference for the power-down threshold and the output common-mode default, and must be kept within the ±2.5 V to ±15 V (or 5 V to 30 V single supply) operating range.
7 PD input Active-low power-down pin on THS4130 only; pull it to VCC- to turn the device off, it is internally pulled up to VCC+ through 250 kΩ if left unconnected, and the device is active when PD is about 1.4 V above VCC-.
8 VIN+ power_in Positive input pin; the common-mode input voltage range is -4 V to 4.5 V at VCC = ±5 V and continuous input current is limited to 10 mA.
9 Thermal Pad passive Exposed thermal pad on the DGN (HVSSOP) package, electrically isolated from the die so it can connect to any potential from VCC- to VCC+, and it should be connected to a large copper plane for best thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8-EP
Category Operational Amplifier/Comparator
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 33 V VCC- to VCC+ 4
Differential input voltage VID -1.5 1.5 V 4
Continuous input current IIN 10 mA 4
Output current IO 150 mA 4
Junction temperature TJ 150 °C 4
Junction temperature, continuous operation, long-term reliability TJ 125 °C Continuous operation 4
Ambient temperature, I-suffix TA -40 85 °C I-suffix 4
Storage temperature Tstg -65 150 °C 4
Supply turn on and turn off dV/dT dV/dT 1.7 V/µs 4
Supply voltage, dual supply VCC 2.5 15 V Dual supply 4
Supply voltage, single supply VCC 5 30 V Single supply 4
Operating free-air temperature, I-suffix device TA -40 85 °C I-suffix device 4
Open-loop gain AOL 71 78 dB TA = 25°C 5
Open-loop gain AOL 69 dB TA = full range 5
Input offset voltage VOS 0.2 2 mV TA = 25°C 5
Input offset voltage VOS 3 mV TA = full range 5
Common-mode input offset voltage 0.2 5.5 mV Referred to VOCM 5
Input bias current IIB 5 15.4 µA TA = full range 5
Input offset current IOS 100 500 nA TA = full range 5
Common-mode rejection ratio CMRR 80 95 dB TA = full range 6
Common-mode input voltage range VICM -4 4.5 V 6
Output voltage swing VO 3.7 V VCC = ±5 V, RL = 1 kΩ, TA = 25°C 6
Output voltage swing VO 3.6 V VCC = ±5 V, RL = 1 kΩ, TA = full range 6
Output voltage swing VO 11.5 12.4 V VCC = ±15 V, RL = 1 kΩ, TA = 25°C 6
Output voltage swing VO 11.2 V VCC = ±15 V, RL = 1 kΩ, TA = full range 6
Output current IO 25 45 mA VCC = 5 V, RL = 7 Ω, TA = 25°C 6
Output current IO 20 mA VCC = 5 V, RL = 7 Ω, TA = full range 6
Output current IO 30 55 mA VCC = ±5 V, RL = 7 Ω, TA = 25°C 6
Output current IO 28 mA VCC = ±5 V, RL = 7 Ω, TA = full range 6
Output current IO 65 85 mA VCC = ±15 V, RL = 7 Ω, TA = 25°C 6
Output current IO 60 mA VCC = ±15 V, RL = 7 Ω, TA = full range 6
Quiescent current ICC 10.4 15 mA VCC = ±5 V, TA = 25°C 6
Quiescent current ICC 16 mA VCC = ±5 V, TA = full range 6
Quiescent current (shutdown), THS4130 only ICC(SD) 0.86 1.4 mA PD = -5 V, TA = 25°C 6
Quiescent current (shutdown), THS4130 only ICC(SD) 1.5 mA PD = -5 V, TA = full range 6
Power-supply rejection ratio (dc) PSRR 73 98 dB TA = +25°C 6
Power-supply rejection ratio (dc) PSRR 70 dB TA = full range 6
Junction-to-ambient thermal resistance, DGN (HVSSOP) RθJA 57.6 °C/W DGN (HVSSOP) 8 pins 4
Junction-to-case (top) thermal resistance, DGN (HVSSOP) RθJC(top) 76.3 °C/W DGN (HVSSOP) 8 pins 4
Junction-to-board thermal resistance, DGN (HVSSOP) RθJB 30 °C/W DGN (HVSSOP) 8 pins 4
Junction-to-top characterization parameter, DGN (HVSSOP) ψJT 4 °C/W DGN (HVSSOP) 8 pins 4
Junction-to-board characterization parameter, DGN (HVSSOP) ψJB 29.9 °C/W DGN (HVSSOP) 8 pins 4
Junction-to-case (bottom) thermal resistance, DGN (HVSSOP) RθJC(bot) 14.3 °C/W DGN (HVSSOP) 8 pins 4

CAD (KiCad official)

  • Symbol: THS4130IDGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ths4130idgnr-etched.step / ths4130idgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths4130idgnr.step / ths4130idgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 52843f1a0f5bebf8, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF