component
STM795SM6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/stm795sm6f
d43658f
STM795SM6F
STMicroelectronics · Supervisor And Reset ICs · SOIC-8
STM795SM6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Supply output voltage for external LPSRAM that switches between VCC (when above switchover voltage VSO) through P-channel MOSFET switch and VBAT (when VCC falls below VSO). |
| 2 | VCC | power_in | Supply voltage input with operating range of 1.1 V to 5.5 V. |
| 3 | Vccsw | output | VCC switch output (push-pull) that goes high when VOUT switches to battery and low when VOUT switches back to VCC, can drive external PMOS gate for IOUT exceeding 75 mA. |
| 4 | VSS | power_in | Ground connection. |
| 5 | E | input | Chip enable input to the chip enable gating circuit; connect to ground if unused. |
| 6 | ECON | output | Conditioned chip enable output that goes low only when E is low and reset is not asserted, remains low for 15 µs maximum or until E goes high when reset is asserted, pulled high to VOUT in disabled mode. |
| 7 | RST | tri_state | Active-low reset output (open-drain) that pulses low for trec when triggered and remains low whenever VCC falls below the reset threshold or when power fails. |
| 8 | VBAT | power_in | Backup battery input that connects to VOUT through 100 Ω switch when VCC falls below VSO, supporting voltages that may exceed VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
STM795SM6F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
stm795sm6f-etched.step/stm795sm6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm795sm6f.step/stm795sm6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
7b0e1b14da4b9b31, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM795SM6F
**STMicroelectronics** · Supervisor And Reset ICs · SOIC-8
STM795SM6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Supply output voltage for external LPSRAM that switches between VCC (when above switchover voltage VSO) through P-channel MOSFET switch and VBAT (when VCC falls below VSO). |
| 2 | VCC | power_in | Supply voltage input with operating range of 1.1 V to 5.5 V. |
| 3 | Vccsw | output | VCC switch output (push-pull) that goes high when VOUT switches to battery and low when VOUT switches back to VCC, can drive external PMOS gate for IOUT exceeding 75 mA. |
| 4 | VSS | power_in | Ground connection. |
| 5 | E | input | Chip enable input to the chip enable gating circuit; connect to ground if unused. |
| 6 | ECON | output | Conditioned chip enable output that goes low only when E is low and reset is not asserted, remains low for 15 µs maximum or until E goes high when reset is asserted, pulled high to VOUT in disabled mode. |
| 7 | RST | tri_state | Active-low reset output (open-drain) that pulses low for trec when triggered and remains low whenever VCC falls below the reset threshold or when power fails. |
| 8 | VBAT | power_in | Backup battery input that connects to VOUT through 100 Ω switch when VCC falls below VSO, supporting voltages that may exceed VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `STM795SM6F`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `stm795sm6f-etched.step` / `stm795sm6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm795sm6f.step` / `stm795sm6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910171939872768) (42 pp, sha256 `7b0e1b14da4b9b31`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm795sm6f-datasheet.pdf)