← Commit history

Initial commit: component/stm795sm6f

Ray ·d43658f744 ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# STM795SM6F++**STMicroelectronics** · Supervisor And Reset ICs · SOIC-8++STM795SM6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOUT | power_out | Supply output voltage for external LPSRAM that switches between VCC (when above switchover voltage VSO) through P-channel MOSFET switch and VBAT (when VCC falls below VSO). |+| 2 | VCC | power_in | Supply voltage input with operating range of 1.1 V to 5.5 V. |+| 3 | Vccsw | output | VCC switch output (push-pull) that goes high when VOUT switches to battery and low when VOUT switches back to VCC, can drive external PMOS gate for IOUT exceeding 75 mA. |+| 4 | VSS | power_in | Ground connection. |+| 5 | E | input | Chip enable input to the chip enable gating circuit; connect to ground if unused. |+| 6 | ECON | output | Conditioned chip enable output that goes low only when E is low and reset is not asserted, remains low for 15 µs maximum or until E goes high when reset is asserted, pulled high to VOUT in disabled mode. |+| 7 | RST | tri_state | Active-low reset output (open-drain) that pulses low for trec when triggered and remains low whenever VCC falls below the reset threshold or when power fails. |+| 8 | VBAT | power_in | Backup battery input that connects to VOUT through 100 Ω switch when VCC falls below VSO, supporting voltages that may exceed VCC. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `STM795SM6F`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `stm795sm6f-etched.step` / `stm795sm6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm795sm6f.step` / `stm795sm6f.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910171939872768) (42 pp, sha256 `7b0e1b14da4b9b31`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm795sm6f-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "stm795sm6f",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Supervisor And Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "stm795sm6f",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm795sm6f.kicad_sym",+    "stm795sm6f.kicad_mod",+    "stm795sm6f.glb",+    "stm795sm6f.step",+    "stm795sm6f.lbr",+    "docs/hero.png",+    "docs/stm795sm6f-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM795SM6F",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "Supervisor And Reset ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910171939872768",+    "parts": {+      "symbol": "stm795sm6f.kicad_sym",+      "footprint": "stm795sm6f.kicad_mod",+      "model_3d": "stm795sm6f-etched.glb",+      "model_3d_plain": "stm795sm6f.glb",+      "model_3d_step": "stm795sm6f-etched.step",+      "model_3d_step_plain": "stm795sm6f.step",+      "lbr": "stm795sm6f.lbr"+    },+    "distributor_links": {+      "lcsc": "C283497"+    },+    "pins": [+      {+        "number": "1",+        "name": "VOUT",+        "type": "power_out",+        "description": "Supply output voltage for external LPSRAM that switches between VCC (when above switchover voltage VSO) through P-channel MOSFET switch and VBAT (when VCC falls below VSO)."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input with operating range of 1.1 V to 5.5 V."+      },+      {+        "number": "3",+        "name": "Vccsw",+        "type": "output",+        "description": "VCC switch output (push-pull) that goes high when VOUT switches to battery and low when VOUT switches back to VCC, can drive external PMOS gate for IOUT exceeding 75 mA."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "5",+        "name": "E",+        "type": "input",+        "description": "Chip enable input to the chip enable gating circuit; connect to ground if unused."+      },+      {+        "number": "6",+        "name": "ECON",+        "type": "output",+        "description": "Conditioned chip enable output that goes low only when E is low and reset is not asserted, remains low for 15 µs maximum or until E goes high when reset is asserted, pulled high to VOUT in disabled mode."+      },+      {+        "number": "7",+        "name": "RST",+        "type": "tri_state",+        "description": "Active-low reset output (open-drain) that pulses low for trec when triggered and remains low whenever VCC falls below the reset threshold or when power fails."+      },+      {+        "number": "8",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup battery input that connects to VOUT through 100 Ω switch when VCC falls below VSO, supporting voltages that may exceed VCC."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 42,+        "cost_usd": 0.3512,+        "at": "2026-09-23T13:05:54"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910171939872768",+        "pages": 42,+        "sha256": "7b0e1b14da4b9b31",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file