Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM795SM6F

STMicroelectronics · Supervisor And Reset ICs · SOIC-8

STM795SM6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Supply output voltage for external LPSRAM that switches between VCC (when above switchover voltage VSO) through P-channel MOSFET switch and VBAT (when VCC falls below VSO).
2 VCC power_in Supply voltage input with operating range of 1.1 V to 5.5 V.
3 Vccsw output VCC switch output (push-pull) that goes high when VOUT switches to battery and low when VOUT switches back to VCC, can drive external PMOS gate for IOUT exceeding 75 mA.
4 VSS power_in Ground connection.
5 E input Chip enable input to the chip enable gating circuit; connect to ground if unused.
6 ECON output Conditioned chip enable output that goes low only when E is low and reset is not asserted, remains low for 15 µs maximum or until E goes high when reset is asserted, pulled high to VOUT in disabled mode.
7 RST tri_state Active-low reset output (open-drain) that pulses low for trec when triggered and remains low whenever VCC falls below the reset threshold or when power fails.
8 VBAT power_in Backup battery input that connects to VOUT through 100 Ω switch when VCC falls below VSO, supporting voltages that may exceed VCC.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: STM795SM6F
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: stm795sm6f-etched.step / stm795sm6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm795sm6f.step / stm795sm6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 7b0e1b14da4b9b31, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF