main
Ray
Set visibility: public
307accb
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231
{
"schema_version": 1,
"type": "component",
"slug": "stm32l562ceu6",
"title": "STM32L562CEU6",
"brief": "STMicroelectronics ST Microelectronics, UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"stm32l562ceu6",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "STM32L562CEU6",
"manufacturer": "STMicroelectronics",
"package": "UFQFPN-48(7x7)",
"pin_count": 49,
"category": "Embedded Processors & Controllers",
"subcategory": "ST Microelectronics",
"datasheet": "https://www.st.com/resource/en/datasheet/stm32l562ve.pdf",
"parts": {
"symbol": "stm32l562ceu6.kicad_sym",
"footprint": "stm32l562ceu6.kicad_mod",
"model_3d": "stm32l562ceu6-hero.glb",
"model_3d_plain": "stm32l562ceu6.glb",
"model_3d_step": "stm32l562ceu6-etched.step",
"model_3d_step_plain": "stm32l562ceu6.step",
"lbr": "stm32l562ceu6.lbr"
},
"distributor_links": {
"lcsc": "C1236656",
"digikey": "497-STM32L562CEU6-ND",
"mouser": "511-STM32L562CEU6"
},
"distributor_check": {
"checked_at": "2026-11-12T19:59:59Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-STM32L562CEU6-ND",
"status": "found"
},
"mouser": {
"pn": "511-STM32L562CEU6",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VBAT",
"type": "power_in",
"description": "Backup supply (1.55 V to 3.6 V) for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present."
},
{
"number": "2",
"name": "PC13",
"type": "bidirectional",
"description": "FT I/O supplied through the power switch, which sinks only 3 mA, so in output mode it must not exceed 2 MHz with a 30 pF maximum load and must not be used as a current source; additional functions are WKUP2, RTC_TS/RTC_OUT1 and TAMP_IN1/TAMP_OUT2."
},
{
"number": "3",
"name": "PC14-OSC32_IN",
"type": "bidirectional",
"description": "FT I/O on the power switch with the same 3 mA limit (output at most 2 MHz with 30 pF, no current-source use), doubling as the 32 kHz oscillator input OSC32_IN."
},
{
"number": "4",
"name": "PC15-OSC32_OUT",
"type": "bidirectional",
"description": "FT I/O on the power switch with the same 3 mA limit (output at most 2 MHz with 30 pF, no current-source use), doubling as the 32 kHz oscillator output OSC32_OUT."
},
{
"number": "5",
"name": "PH0-OSC_IN",
"type": "bidirectional",
"description": "FT I/O (PH0) that doubles as the high-speed external oscillator input OSC_IN, with EVENTOUT as its only alternate function."
},
{
"number": "6",
"name": "PH1-OSC_OUT",
"type": "bidirectional",
"description": "FT I/O (PH1) that doubles as the high-speed external oscillator output OSC_OUT, with EVENTOUT as its only alternate function."
},
{
"number": "7",
"name": "NRST",
"type": "bidirectional",
"description": "Bidirectional reset pin with an embedded weak pull-up resistor; functionality is guaranteed when reset is released down to VBOR0 min."
},
{
"number": "8",
"name": "VSSA/VREF-",
"type": "power_in",
"description": "Analog ground; VREF- must always be equal to VSSA, and on this package the pin is bonded to VSSA."
},
{
"number": "9",
"name": "VDDA/VREF+",
"type": "power_in",
"description": "Analog supply of 1.62 V (ADCs/COMPs) or 1.8 V (DACs/OPAMPs) to 3.6 V; VREF+ is double-bonded to VDDA here, so the internal voltage reference buffer is unavailable and must stay disabled, and VREF+ must equal VDDA when VDDA is below 2 V."
},
{
"number": "10",
"name": "PA0",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS/USART2_NSS, UART4_TX, SAI1_EXTCLK and TIM2_ETR alternate functions; additional OPAMP1_VINP, ADC12_IN5, WKUP1 and TAMP_IN2/TAMP_OUT1."
},
{
"number": "11",
"name": "PA1",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with TIM2_CH2, TIM5_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS/USART2_DE, UART4_RX, OCTOSPI1_DQS and TIM15_CH1N alternate functions; additional OPAMP1_VINM, ADC12_IN6 and TAMP_IN5/TAMP_OUT4."
},
{
"number": "12",
"name": "PA2",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with TIM2_CH3, TIM5_CH3, USART2_TX, LPUART1_TX, OCTOSPI1_NCS, UCPD1_FRSTX1, SAI2_EXTCLK and TIM15_CH1 alternate functions; additional ADC12_IN7, WKUP4/LSCO and COMP1_INP."
},
{
"number": "13",
"name": "PA3",
"type": "bidirectional",
"description": "TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, LPUART1_RX, OCTOSPI1_CLK, SAI1_MCLK_A and TIM15_CH2 alternate functions; additional OPAMP1_VOUT and ADC12_IN8."
},
{
"number": "14",
"name": "PA4",
"type": "bidirectional",
"description": "TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with OCTOSPI1_NCS, SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B and LPTIM2_OUT alternate functions; additional ADC12_IN9 and DAC1_OUT1."
},
{
"number": "15",
"name": "PA5",
"type": "bidirectional",
"description": "TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK and LPTIM2_ETR alternate functions; additional ADC12_IN10 and DAC1_OUT2."
},
{
"number": "16",
"name": "PA6",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS/USART3_NSS, LPUART1_CTS, OCTOSPI1_IO3 and TIM16_CH1 alternate functions; additional OPAMP2_VINP and ADC12_IN11."
},
{
"number": "17",
"name": "PA7",
"type": "bidirectional",
"description": "FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, I2C3_SCL, SPI1_MOSI, OCTOSPI1_IO2 and TIM17_CH1 alternate functions; additional OPAMP2_VINM and ADC12_IN12."
},
{
"number": "18",
"name": "PB0",
"type": "bidirectional",
"description": "TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI1_NSS, USART3_CK, OCTOSPI1_IO1, COMP1_OUT and SAI1_EXTCLK alternate functions; additional OPAMP2_VOUT and ADC12_IN15."
},
{
"number": "19",
"name": "PB1",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, OCTOSPI1_IO0 and LPTIM2_IN1 alternate functions; additional COMP1_INM and ADC12_IN16."
},
{
"number": "20",
"name": "PB2",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, OCTOSPI1_DQS and UCPD1_FRSTX1 alternate functions; additional RTC_OUT2 and COMP1_INP."
},
{
"number": "21",
"name": "PB10",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with TIM2_CH3, LPTIM3_OUT, I2C4_SCL, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX, TSC_SYNC, OCTOSPI1_CLK, COMP1_OUT and SAI1_SCK_A alternate functions."
},
{
"number": "22",
"name": "PB11",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with TIM2_CH4, I2C4_SDA, I2C2_SDA, USART3_RX, LPUART1_TX, OCTOSPI1_NCS and COMP2_OUT alternate functions."
},
{
"number": "23",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; all VSS pins must always be connected to the external ground within the permitted range."
},
{
"number": "24",
"name": "VDD",
"type": "power_in",
"description": "Main supply of 1.71 V to 3.6 V for the I/Os, the internal regulator and the system analog blocks such as reset, power management and clocks."
},
{
"number": "25",
"name": "PB12",
"type": "bidirectional",
"description": "FT I/O (5 V tolerant) with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS/LPUART1_DE, TSC_G1_IO1, OCTOSPI1_NCLK, SAI2_FS_A and TIM15_BKIN alternate functions."
},
{
"number": "26",
"name": "PB13",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with TIM1_CH1N, LPTIM3_IN1, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS/USART3_NSS, LPUART1_CTS, TSC_G1_IO2, UCPD1_FRSTX2, SAI2_SCK_A and TIM15_CH1N alternate functions."
},
{
"number": "27",
"name": "PB14",
"type": "bidirectional",
"description": "FT_fd I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery function) with TIM1_CH2N, LPTIM3_ETR, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS/USART3_DE, TSC_G1_IO3, SAI2_MCLK_A and TIM15_CH1 alternate functions; additional UCPD1_DB2."
},
{
"number": "28",
"name": "PB15",
"type": "bidirectional",
"description": "FT_c I/O (5 V tolerant, USB Type-C PD capable) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, SAI2_SD_A and TIM15_CH2 alternate functions; additional UCPD1_CC2."
},
{
"number": "29",
"name": "PA8",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with MCO, TIM1_CH1, SAI1_CK2, USART1_CK, SAI1_SCK_A and LPTIM2_OUT alternate functions."
},
{
"number": "30",
"name": "PA9",
"type": "bidirectional",
"description": "FT_fu I/O (5 V tolerant, Fm+ capable, USB function supplied by VDDUSB) with TIM1_CH2, SPI2_SCK, USART1_TX, SAI1_FS_A and TIM15_BKIN alternate functions."
},
{
"number": "31",
"name": "PA10",
"type": "bidirectional",
"description": "FT_fu I/O (5 V tolerant, Fm+ capable, USB function supplied by VDDUSB) with TIM1_CH3, SAI1_D1, USART1_RX, CRS_SYNC, SAI1_SD_A and TIM17_BKIN alternate functions."
},
{
"number": "32",
"name": "PA11",
"type": "bidirectional",
"description": "FT_u I/O (5 V tolerant, USB function supplied by VDDUSB) with TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS/USART1_NSS, FDCAN1_RX and USB_DM alternate functions."
},
{
"number": "33",
"name": "PA12",
"type": "bidirectional",
"description": "FT_u I/O (5 V tolerant, USB function supplied by VDDUSB) with TIM1_ETR, SPI1_MOSI, USART1_RTS/USART1_DE, FDCAN1_TX and USB_DP alternate functions."
},
{
"number": "34",
"name": "PA13 (JTMS/SWDIO)",
"type": "bidirectional",
"description": "FT I/O that after reset is the JTMS/SWDIO debug function, with its internal pull-up activated; alternate functions include IR_OUT, USB_NOE, SAI1_SD_B and EVENTOUT."
},
{
"number": "35",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; all VSS pins must always be connected to the external ground within the permitted range."
},
{
"number": "36",
"name": "VDD",
"type": "power_in",
"description": "Main supply of 1.71 V to 3.6 V for the I/Os, the internal regulator and the system analog blocks such as reset, power management and clocks."
},
{
"number": "37",
"name": "PA14 (JTCK/SWCLK)",
"type": "bidirectional",
"description": "FT I/O that after reset is the JTCK/SWCLK debug function, with its internal pull-down activated; alternate functions include LPTIM1_OUT, I2C1_SMBA, I2C4_SMBA, SAI1_FS_B and EVENTOUT."
},
{
"number": "38",
"name": "PA15 (JTDI)",
"type": "bidirectional",
"description": "FT_c I/O (USB Type-C PD capable) that after reset is the JTDI debug function, with its internal pull-up activated; additional UCPD1_CC1 function."
},
{
"number": "39",
"name": "PB3 (JTDO/TRACESWO)",
"type": "bidirectional",
"description": "FT_a I/O (5 V tolerant, analog switch supplied by VDDA) with JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS/USART1_DE, CRS_SYNC and SAI1_SCK_B alternate functions; additional COMP2_INM."
},
{
"number": "40",
"name": "PB4 (NJTRST)",
"type": "bidirectional",
"description": "FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) that after reset is the NJTRST debug function with its internal pull-up activated; alternate functions include TIM3_CH1, I2C3_SDA, SPI1_MISO, SPI3_MISO, USART1_CTS/USART1_NSS and TIM17_BKIN; additional COMP2_INP."
},
{
"number": "41",
"name": "PB5",
"type": "bidirectional",
"description": "FT_d I/O (5 V tolerant, USB Type-C PD dead battery function) with LPTIM1_IN1, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS/UART5_NSS, COMP2_OUT, SAI1_SD_B and TIM16_BKIN alternate functions; additional UCPD1_DB1."
},
{
"number": "42",
"name": "PB6",
"type": "bidirectional",
"description": "FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) with LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, I2C4_SCL, USART1_TX, SAI1_FS_B and TIM16_CH1N alternate functions; additional COMP2_INP."
},
{
"number": "43",
"name": "PB7",
"type": "bidirectional",
"description": "FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) with LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, I2C4_SDA, USART1_RX, UART4_CTS, FMC_NL and TIM17_CH1N alternate functions; additional COMP2_INM and PVD_IN."
},
{
"number": "44",
"name": "PH3-BOOT0",
"type": "bidirectional",
"description": "FT I/O (PH3) that carries the BOOT0 function, with EVENTOUT as its only listed alternate function."
},
{
"number": "45",
"name": "PB8",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with TIM4_CH3, SAI1_CK1, I2C1_SCL, DFSDM1_CKOUT, SDMMC1_CKIN, FDCAN1_RX, SDMMC1_D4, SAI1_MCLK_A and TIM16_CH1 alternate functions."
},
{
"number": "46",
"name": "PB9",
"type": "bidirectional",
"description": "FT_f I/O (5 V tolerant, Fm+ capable) with IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS, SDMMC1_CDIR, FDCAN1_TX, SDMMC1_D5, SAI1_FS_A and TIM17_CH1 alternate functions."
},
{
"number": "47",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; all VSS pins must always be connected to the external ground within the permitted range."
},
{
"number": "48",
"name": "VDD",
"type": "power_in",
"description": "Main supply of 1.71 V to 3.6 V for the I/Os, the internal regulator and the system analog blocks such as reset, power management and clocks."
},
{
"number": "49",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Variant selection: the MPN STM32L562CEU6 decodes to 48 pins (C), 512 KB Flash (E), UFQFPN (U). No SM; Table 21 was extracted from flattened text. Pin numbers were assigned by column position, and the VS; Table 20 defines B as the dedicated BOOT0 pin structure, but Table 21 lists PH3-BOOT0 as I/O FT. The"
],
"pages_sent": 118,
"cost_usd": 0.0378,
"at": "2026-11-12T19:59:40"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/stm32l562ve.pdf",
"pages": 341,
"sha256": "bc9dcd89da9546a8",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.55,
"height_basis": "datasheet A, nominal",
"standoff_mm": 0
},
"pins": {
"total": 49,
"described": 49,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "stm32l562ceu6.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.02,
7.02,
0.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8a5de134a534f42f13a745aa9c760582f2b48bae4ac72eafb838500da86d82a5",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "stm32l562ceu6-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.02,
7.02,
0.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "6a23cbfa22cd59fbb1c9f3b43a609623904133aa69fabcb8d8e31bd0b8d0adc9",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "UFQFPN48",
"source_page": 316,
"D": {
"nom_mm": 7,
"range_mm": [
6.9,
7.1
]
},
"E1": {
"nom_mm": 7,
"range_mm": [
6.9,
7.1
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.55,
"range_mm": [
0.5,
0.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "stm32l562ceu6.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "UFQFPN-48(7x7)",
"Category": "Embedded Processors & Controllers",
"Pins": "49"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "bc9dcd89da9546a8e1dc13664a2e76b1143e8775d7a2a9b3909fe84c39b4f138",
"rows": [
{
"name": "External main supply voltage (including VDD, VDDA, VDDIO2, VDDUSB, VBAT, VDDSMPS, VREF+)",
"symbol": "VDDX - VSS",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Input voltage on FT_xxx pins except FT_c (max = Min(Min(VDD, VDDA, VDDIO2, VDDUSB, VDDSMPS)+4.0, 6.0) as printed)",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Input voltage on FT_c pins",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 5.5,
"conditions": "",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Input voltage on any other pins",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Allowed voltage difference for VREF+ > VDDA",
"symbol": "VREF+ - VDDA",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "VREF+ > VDDA",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Variations between different VDDX power pins of the same domain",
"symbol": "|ΔVDDx|",
"kind": "absolute_maximum",
"unit": "mV",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 147,
"source": "datasheet"
},
{
"name": "Variations between all the different ground pins (include VREF- pin)",
"symbol": "|VSSx-VSS|",
"kind": "absolute_maximum",
"unit": "mV",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Total current into sum of all VDD power lines (source)",
"symbol": "∑IVDD",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 160,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Total current out of sum of all VSS ground lines (sink)",
"symbol": "∑IVSS",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 160,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Maximum current into each VDD power pin (source)",
"symbol": "IVDD(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Maximum current out of each VSS ground pin (sink)",
"symbol": "IVSS(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Output current sunk by any I/O and control pin",
"symbol": "IIO(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 20,
"conditions": "except FT_f pins",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Output current sunk by any FT_f pin",
"symbol": "IIO(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 20,
"conditions": "FT_f pin",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Output current sourced by any I/O and control pin",
"symbol": "IIO(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 20,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Total output current sunk by sum of all I/Os and control pins",
"symbol": "∑IIO(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Total output current sourced by sum of all I/Os and control pins",
"symbol": "∑IIO(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Injected current on FT_xxx, TT_xx, RST and B pins",
"symbol": "IINJ(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": -5,
"typ": null,
"max": 0,
"conditions": "except PA4, PA5",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Injected current on PA4, PA5",
"symbol": "IINJ(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": -5,
"typ": null,
"max": 0,
"conditions": "PA4, PA5",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Total injected current (sum of all I/Os and control pins)",
"symbol": "∑|IINJ(PIN)|",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 148,
"source": "datasheet"
},
{
"name": "Storage temperature range",
"symbol": "TSTG",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Maximum junction temperature",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": null,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Internal AHB clock frequency",
"symbol": "fHCLK",
"kind": "recommended_operating",
"unit": "MHz",
"min": 0,
"typ": null,
"max": 110,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Internal APB1 clock frequency",
"symbol": "fPCLK1",
"kind": "recommended_operating",
"unit": "MHz",
"min": 0,
"typ": null,
"max": 110,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Internal APB2 clock frequency",
"symbol": "fPCLK2",
"kind": "recommended_operating",
"unit": "MHz",
"min": 0,
"typ": null,
"max": 110,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Standard operating voltage",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 149,
"source": "datasheet"
},
{
"name": "PG[15:2] I/Os supply voltage",
"symbol": "VDDIO2",
"kind": "recommended_operating",
"unit": "V",
"min": 1.08,
"typ": null,
"max": 3.6,
"conditions": "At least one I/O in PG[15:2] used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "PG[15:2] I/Os supply voltage",
"symbol": "VDDIO2",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": 3.6,
"conditions": "PG[15:2] not used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Analog supply voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 3.6,
"conditions": "ADC or COMP used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Analog supply voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.8,
"typ": null,
"max": 3.6,
"conditions": "DAC or OPAMP used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Analog supply voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2.4,
"typ": null,
"max": 3.6,
"conditions": "VREFBUF used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Analog supply voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": null,
"conditions": "ADC, DAC, OPAMP, COMP, VREFBUF not used",
"source_page": 149,
"source": "datasheet"
},
{
"name": "Backup operating voltage",
"symbol": "VBAT",
"kind": "recommended_operating",
"unit": "V",
"min": 1.55,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 150,
"source": "datasheet"
},
{
"name": "USB supply voltage",
"symbol": "VDDUSB",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": null,
"max": 3.6,
"conditions": "USB used",
"source_page": 150,
"source": "datasheet"
},
{
"name": "USB supply voltage",
"symbol": "VDDUSB",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": 3.6,
"conditions": "USB not used",
"source_page": 150,
"source": "datasheet"
},
{
"name": "I/O input voltage (max VDDIOx+0.3 as printed)",
"symbol": "VIN",
"kind": "recommended_operating",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "TT_xx I/O",
"source_page": 150,
"source": "datasheet"
},
{
"name": "I/O input voltage",
"symbol": "VIN",
"kind": "recommended_operating",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 5,
"conditions": "FT_c I/O",
"source_page": 150,
"source": "datasheet"
},
{
"name": "I/O input voltage (max MIN(MIN(VDD, VDDA, VDDIO2, VDDUSB)+3.6 V, 5.5 V) as printed)",
"symbol": "VIN",
"kind": "recommended_operating",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "All I/O except FT_c and TT_xx",
"source_page": 150,
"source": "datasheet"
},
{
"name": "Ambient temperature, suffix 6 version, maximum power dissipation",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 85,
"conditions": "Suffix 6 version, maximum power dissipation",
"source_page": 150,
"source": "datasheet"
},
{
"name": "Ambient temperature, suffix 6 version, low-power dissipation",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 105,
"conditions": "Suffix 6 version, low-power dissipation",
"source_page": 150,
"source": "datasheet"
},
{
"name": "Junction temperature range, suffix 6 version",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 105,
"conditions": "Suffix 6 version",
"source_page": 150,
"source": "datasheet"
},
{
"name": "Reset temporization after BOR0 is detected",
"symbol": "tRSTTEMPO",
"kind": "timing",
"unit": "µs",
"min": null,
"typ": 250,
"max": 400,
"conditions": "VDD rising",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 0",
"symbol": "VBOR0",
"kind": "electrical",
"unit": "V",
"min": 1.62,
"typ": 1.66,
"max": 1.7,
"conditions": "Rising edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 0",
"symbol": "VBOR0",
"kind": "electrical",
"unit": "V",
"min": 1.6,
"typ": 1.64,
"max": 1.69,
"conditions": "Falling edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 1",
"symbol": "VBOR1",
"kind": "electrical",
"unit": "V",
"min": 2.06,
"typ": 2.1,
"max": 2.14,
"conditions": "Rising edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 1",
"symbol": "VBOR1",
"kind": "electrical",
"unit": "V",
"min": 1.96,
"typ": 2,
"max": 2.04,
"conditions": "Falling edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 2",
"symbol": "VBOR2",
"kind": "electrical",
"unit": "V",
"min": 2.26,
"typ": 2.31,
"max": 2.35,
"conditions": "Rising edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 2",
"symbol": "VBOR2",
"kind": "electrical",
"unit": "V",
"min": 2.16,
"typ": 2.2,
"max": 2.24,
"conditions": "Falling edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 3",
"symbol": "VBOR3",
"kind": "electrical",
"unit": "V",
"min": 2.56,
"typ": 2.61,
"max": 2.66,
"conditions": "Rising edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 3",
"symbol": "VBOR3",
"kind": "electrical",
"unit": "V",
"min": 2.47,
"typ": 2.52,
"max": 2.57,
"conditions": "Falling edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 4",
"symbol": "VBOR4",
"kind": "electrical",
"unit": "V",
"min": 2.85,
"typ": 2.9,
"max": 2.95,
"conditions": "Rising edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Brown-out reset threshold 4",
"symbol": "VBOR4",
"kind": "electrical",
"unit": "V",
"min": 2.76,
"typ": 2.81,
"max": 2.86,
"conditions": "Falling edge",
"source_page": 153,
"source": "datasheet"
},
{
"name": "Internal reference voltage",
"symbol": "VREFINT",
"kind": "electrical",
"unit": "V",
"min": 1.182,
"typ": 1.212,
"max": 1.232,
"conditions": "–40°C < TA < +130°C",
"source_page": 155,
"source": "datasheet"
},
{
"name": "Internal reference voltage spread over the temperature range",
"symbol": "∆VREFINT",
"kind": "electrical",
"unit": "mV",
"min": null,
"typ": 5,
"max": 7.5,
"conditions": "VDD = 3 V",
"source_page": 155,
"source": "datasheet"
},
{
"name": "Average temperature coefficient",
"symbol": "TCoeff",
"kind": "temperature_coefficient",
"unit": "ppm/°C",
"min": null,
"typ": 30,
"max": 50,
"conditions": "–40°C < TA < +130°C",
"source_page": 155,
"source": "datasheet"
},
{
"name": "Average voltage coefficient",
"symbol": "VDDCoeff",
"kind": "voltage_coefficient",
"unit": "ppm/V",
"min": null,
"typ": 250,
"max": 1200,
"conditions": "3.0 V < VDD < 3.6 V",
"source_page": 155,
"source": "datasheet"
},
{
"name": "Long term stability",
"symbol": "ACoeff",
"kind": "electrical",
"unit": "ppm",
"min": null,
"typ": 300,
"max": 1000,
"conditions": "1000 hours, T = 25°C",
"source_page": 155,
"source": "datasheet"
},
{
"name": "1/4 reference voltage (% of VREFINT)",
"symbol": "VREFINT_DIV1",
"kind": "electrical",
"unit": "%",
"min": 24,
"typ": 25,
"max": 26,
"conditions": "",
"source_page": 155,
"source": "datasheet"
},
{
"name": "1/2 reference voltage (% of VREFINT)",
"symbol": "VREFINT_DIV2",
"kind": "electrical",
"unit": "%",
"min": 49,
"typ": 50,
"max": 51,
"conditions": "",
"source_page": 155,
"source": "datasheet"
},
{
"name": "3/4 reference voltage (% of VREFINT)",
"symbol": "VREFINT_DIV3",
"kind": "electrical",
"unit": "%",
"min": 74,
"typ": 75,
"max": 76,
"conditions": "",
"source_page": 155,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"stm32l562ceu6"
],
"discovery_pitch": "STM32L562CEU6 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"stm32l562ceu6.kicad_sym",
"stm32l562ceu6.kicad_mod",
"stm32l562ceu6.glb",
"stm32l562ceu6.step",
"stm32l562ceu6.lbr",
"docs/hero.png",
"docs/stm32l562ceu6-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"stm32l562ceu6-hero.glb",
"stm32l562ceu6-hero.overlay.json"
],
"visibility": {
"public": true
}
}