main
History Download
Ray Initial commit: component/stm32l476ret6 2daeec3

STM32L476RET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32L476RET6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup battery supply voltage (1.55-3.6V) powering RTC and 32x32-bit backup registers
2 PC13 bidirectional GPIO port C pin 13, 5V tolerant, supports RTC tamper/timestamp/wakeup alternate functions
3 PC14 bidirectional GPIO port C pin 14 (32 kHz oscillator input), 5V tolerant, analog input in reset state
4 PC15 bidirectional GPIO port C pin 15 (32 kHz oscillator output), 5V tolerant, analog input in reset state
5 PH0 bidirectional GPIO port H pin 0 (main oscillator input), 5V tolerant, analog input in reset state
6 PH1 bidirectional GPIO port H pin 1 (main oscillator output), 5V tolerant, analog input in reset state
7 NRST bidirectional System reset pin (active low) with embedded weak pull-up resistor (25-55 kΩ)
8 PC0 bidirectional GPIO port C pin 0, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN1 input
9 PC1 bidirectional GPIO port C pin 1, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN2 input
10 PC2 bidirectional GPIO port C pin 2, 5V tolerant, supports LPTIM1/SPI2/DFSDM/LCD, ADC123_IN3 input
11 PC3 bidirectional GPIO port C pin 3, 5V tolerant, supports LPTIM1/SPI2/LCD_VLCD/SAI1/LPTIM2, ADC123_IN4 input
12 VSSA power_in Analog ground reference for ADC/DAC/OPAMP/COMP, must be connected to VSS
13 VDDA power_in Analog supply voltage (1.62-3.6V minimum 1.8V for DAC/OPAMP, 2.4V for VREFBUF)
14 PA0 bidirectional GPIO port A pin 0, 5V tolerant, supports TIM2/TIM5/TIM8/USART2/UART4/SAI1, OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1
15 PA1 bidirectional GPIO port A pin 1, 5V tolerant, supports TIM2/TIM5/USART2/UART4/LCD/TIM15, OPAMP1_VINM, ADC12_IN6
16 PA2 bidirectional GPIO port A pin 2, 5V tolerant, supports TIM2/TIM5/USART2/LCD/SAI2/TIM15, ADC12_IN7, WKUP4/LSCO
17 PA3 bidirectional GPIO port A pin 3, 3.6V tolerant, supports TIM2/TIM5/USART2/LCD/TIM15, OPAMP1_VOUT, ADC12_IN8
18 VSS power_in Digital ground connection for power supply domain
19 VDD power_in Main supply voltage (1.71-3.6V) for MCU core operation
20 PA4 bidirectional GPIO port A pin 4, 3.6V tolerant, supports SPI1/SPI3/USART2/SAI1/LPTIM2, ADC12_IN9, DAC1_OUT1
21 PA5 bidirectional GPIO port A pin 5, 3.6V tolerant, supports TIM2/TIM8/SPI1/LPTIM2, ADC12_IN10, DAC1_OUT2
22 PA6 bidirectional GPIO port A pin 6, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/USART3/QUADSPI/LCD/TIM16, OPAMP2_VINP, ADC12_IN11, COMP2_BKIN
23 PA7 bidirectional GPIO port A pin 7, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/QUADSPI/LCD/TIM17, OPAMP2_VINM, ADC12_IN12
24 PC4 bidirectional GPIO port C pin 4, 5V tolerant, supports USART3/LCD, COMP1_INM, ADC12_IN13
25 PC5 bidirectional GPIO port C pin 5, 5V tolerant, supports USART3/LCD, COMP1_INP, ADC12_IN14, WKUP5
26 PB0 bidirectional GPIO port B pin 0, 3.6V tolerant, supports TIM1/TIM3/TIM8/USART3/QUADSPI/LCD/COMP1, OPAMP2_VOUT, ADC12_IN15
27 PB1 bidirectional GPIO port B pin 1, 5V tolerant, supports TIM1/TIM3/TIM8/DFSDM/USART3/QUADSPI/LCD/LPTIM2, COMP1_INM, ADC12_IN16
28 PB2 bidirectional GPIO port B pin 2, 5V tolerant, supports RTC_OUT/LPTIM1/I2C3/DFSDM, COMP1_INP
29 PB10 bidirectional GPIO port B pin 10, 5V tolerant, supports TIM2/I2C2/SPI2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP1/SAI1
30 PB11 bidirectional GPIO port B pin 11, 5V tolerant, supports TIM2/I2C2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP2
31 VSS power_in Digital ground connection for power supply domain
32 VDD power_in Main supply voltage (1.71-3.6V) for MCU core operation
33 PB12 bidirectional GPIO port B pin 12, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2
34 PB13 bidirectional GPIO port B pin 13, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2
35 PB14 bidirectional GPIO port B pin 14, 5V tolerant, supports TIM1/TIM8/TIM15/I2C2/SPI2/DFSDM/USART3/TSC/LCD/SWPMI1/SAI2
36 PB15 bidirectional GPIO port B pin 15, 5V tolerant, supports RTC_REFIN/TIM1/TIM8/TIM15/SPI2/DFSDM/TSC/LCD/SWPMI1/SAI2
37 PC6 bidirectional GPIO port C pin 6, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2
38 PC7 bidirectional GPIO port C pin 7, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2
39 PC8 bidirectional GPIO port C pin 8, 5V tolerant, supports TIM3/TIM8/TSC/LCD/SDMMC1
40 PC9 bidirectional GPIO port C pin 9, 5V tolerant, supports TIM3/TIM8/OTG_FS_NOE/LCD/SDMMC1/SAI2, TIM8_BKIN2_COMP1
41 PA8 bidirectional GPIO port A pin 8, 5V tolerant, supports MCO/TIM1/USART1/OTG_FS_SOF/LCD/LPTIM2
42 PA9 bidirectional GPIO port A pin 9, 5V tolerant with USB supply, supports TIM1/USART1/LCD/TIM15, OTG_FS_VBUS monitoring
43 PA10 bidirectional GPIO port A pin 10, 5V tolerant with USB supply, supports TIM1/USART1/OTG_FS_ID/LCD/TIM17
44 PA11 bidirectional GPIO port A pin 11, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_RX/OTG_FS_DM, TIM1_BKIN2_COMP1
45 PA12 bidirectional GPIO port A pin 12, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_TX/OTG_FS_DP
46 PA13 bidirectional JTAG/SWD debug pin (JTMS-SWDIO), 5V tolerant, internal pull-up activated after reset
47 VSS power_in Digital ground connection for power supply domain
48 VDDUSB power_in USB supply voltage (3.0-3.6V) for OTG_FS module operation
49 PA14 bidirectional JTAG/SWD debug clock pin (JTCK-SWCLK), 5V tolerant, internal pull-down activated after reset
50 PA15 bidirectional JTAG debug input pin (JTDI), 5V tolerant, supports TIM2/SPI1/SPI3/UART4/TSC/LCD/SAI2, internal pull-up after reset
51 PC10 bidirectional GPIO port C pin 10, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2
52 PC11 bidirectional GPIO port C pin 11, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2
53 PC12 bidirectional GPIO port C pin 12, 5V tolerant, supports SPI3/USART3/UART5/TSC/LCD/SDMMC1/SAI2
54 PD2 bidirectional GPIO port D pin 2, 5V tolerant, supports TIM3/USART3/UART5/TSC/LCD/SDMMC1
55 PB3 bidirectional JTAG debug output pin (JTDO-TRACESWO), 5V tolerant, supports TIM2/SPI1/SPI3/USART1/LCD/SAI1, COMP2_INM, internal pull-up after reset
56 PB4 bidirectional JTAG reset pin (NJTRST), 5V tolerant, supports TIM3/SPI1/SPI3/USART1/UART5/TSC/LCD/SAI1/TIM17, COMP2_INP, internal pull-up after reset
57 PB5 bidirectional GPIO port B pin 5, 5V tolerant, supports LPTIM1/TIM3/I2C1/SPI1/SPI3/USART1/UART5/TSC/LCD/COMP2/SAI1/TIM16
58 PB6 bidirectional GPIO port B pin 6, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/TSC/SAI1/TIM16, COMP2_INP, TIM8_BKIN2_COMP2
59 PB7 bidirectional GPIO port B pin 7, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/UART4/TSC/LCD/FMC/SAI1/TIM17, COMP2_INM, PVD_IN
60 BOOT0 input Boot configuration input pin (active high, 0-9V), selects between main Flash (low) or system bootloader (high)
61 PB8 bidirectional GPIO port B pin 8, 5V tolerant, supports TIM4/I2C1/DFSDM/CAN1_RX/LCD/SDMMC1/SAI1/TIM16
62 PB9 bidirectional GPIO port B pin 9, 5V tolerant, supports IR_OUT/TIM4/I2C1/SPI2/DFSDM/CAN1_TX/LCD/SDMMC1/SAI1/TIM17
63 VSS power_in Digital ground connection for power supply domain
64 VDD power_in Main supply voltage (1.71-3.6V) for MCU core operation

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32L476RET6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32l476ret6-etched.step / stm32l476ret6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l476ret6.step / stm32l476ret6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (232 pp, sha256 9cc18092f1a2d4f2, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF