← Commit history

Initial commit: component/stm32l476ret6

Ray ·2daeec332c ·
2 files changed +593
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32L476RET6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32L476RET6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup battery supply voltage (1.55-3.6V) powering RTC and 32x32-bit backup registers |+| 2 | PC13 | bidirectional | GPIO port C pin 13, 5V tolerant, supports RTC tamper/timestamp/wakeup alternate functions |+| 3 | PC14 | bidirectional | GPIO port C pin 14 (32 kHz oscillator input), 5V tolerant, analog input in reset state |+| 4 | PC15 | bidirectional | GPIO port C pin 15 (32 kHz oscillator output), 5V tolerant, analog input in reset state |+| 5 | PH0 | bidirectional | GPIO port H pin 0 (main oscillator input), 5V tolerant, analog input in reset state |+| 6 | PH1 | bidirectional | GPIO port H pin 1 (main oscillator output), 5V tolerant, analog input in reset state |+| 7 | NRST | bidirectional | System reset pin (active low) with embedded weak pull-up resistor (25-55 kΩ) |+| 8 | PC0 | bidirectional | GPIO port C pin 0, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN1 input |+| 9 | PC1 | bidirectional | GPIO port C pin 1, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN2 input |+| 10 | PC2 | bidirectional | GPIO port C pin 2, 5V tolerant, supports LPTIM1/SPI2/DFSDM/LCD, ADC123_IN3 input |+| 11 | PC3 | bidirectional | GPIO port C pin 3, 5V tolerant, supports LPTIM1/SPI2/LCD_VLCD/SAI1/LPTIM2, ADC123_IN4 input |+| 12 | VSSA | power_in | Analog ground reference for ADC/DAC/OPAMP/COMP, must be connected to VSS |+| 13 | VDDA | power_in | Analog supply voltage (1.62-3.6V minimum 1.8V for DAC/OPAMP, 2.4V for VREFBUF) |+| 14 | PA0 | bidirectional | GPIO port A pin 0, 5V tolerant, supports TIM2/TIM5/TIM8/USART2/UART4/SAI1, OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1 |+| 15 | PA1 | bidirectional | GPIO port A pin 1, 5V tolerant, supports TIM2/TIM5/USART2/UART4/LCD/TIM15, OPAMP1_VINM, ADC12_IN6 |+| 16 | PA2 | bidirectional | GPIO port A pin 2, 5V tolerant, supports TIM2/TIM5/USART2/LCD/SAI2/TIM15, ADC12_IN7, WKUP4/LSCO |+| 17 | PA3 | bidirectional | GPIO port A pin 3, 3.6V tolerant, supports TIM2/TIM5/USART2/LCD/TIM15, OPAMP1_VOUT, ADC12_IN8 |+| 18 | VSS | power_in | Digital ground connection for power supply domain |+| 19 | VDD | power_in | Main supply voltage (1.71-3.6V) for MCU core operation |+| 20 | PA4 | bidirectional | GPIO port A pin 4, 3.6V tolerant, supports SPI1/SPI3/USART2/SAI1/LPTIM2, ADC12_IN9, DAC1_OUT1 |+| 21 | PA5 | bidirectional | GPIO port A pin 5, 3.6V tolerant, supports TIM2/TIM8/SPI1/LPTIM2, ADC12_IN10, DAC1_OUT2 |+| 22 | PA6 | bidirectional | GPIO port A pin 6, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/USART3/QUADSPI/LCD/TIM16, OPAMP2_VINP, ADC12_IN11, COMP2_BKIN |+| 23 | PA7 | bidirectional | GPIO port A pin 7, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/QUADSPI/LCD/TIM17, OPAMP2_VINM, ADC12_IN12 |+| 24 | PC4 | bidirectional | GPIO port C pin 4, 5V tolerant, supports USART3/LCD, COMP1_INM, ADC12_IN13 |+| 25 | PC5 | bidirectional | GPIO port C pin 5, 5V tolerant, supports USART3/LCD, COMP1_INP, ADC12_IN14, WKUP5 |+| 26 | PB0 | bidirectional | GPIO port B pin 0, 3.6V tolerant, supports TIM1/TIM3/TIM8/USART3/QUADSPI/LCD/COMP1, OPAMP2_VOUT, ADC12_IN15 |+| 27 | PB1 | bidirectional | GPIO port B pin 1, 5V tolerant, supports TIM1/TIM3/TIM8/DFSDM/USART3/QUADSPI/LCD/LPTIM2, COMP1_INM, ADC12_IN16 |+| 28 | PB2 | bidirectional | GPIO port B pin 2, 5V tolerant, supports RTC_OUT/LPTIM1/I2C3/DFSDM, COMP1_INP |+| 29 | PB10 | bidirectional | GPIO port B pin 10, 5V tolerant, supports TIM2/I2C2/SPI2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP1/SAI1 |+| 30 | PB11 | bidirectional | GPIO port B pin 11, 5V tolerant, supports TIM2/I2C2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP2 |+| 31 | VSS | power_in | Digital ground connection for power supply domain |+| 32 | VDD | power_in | Main supply voltage (1.71-3.6V) for MCU core operation |+| 33 | PB12 | bidirectional | GPIO port B pin 12, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2 |+| 34 | PB13 | bidirectional | GPIO port B pin 13, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2 |+| 35 | PB14 | bidirectional | GPIO port B pin 14, 5V tolerant, supports TIM1/TIM8/TIM15/I2C2/SPI2/DFSDM/USART3/TSC/LCD/SWPMI1/SAI2 |+| 36 | PB15 | bidirectional | GPIO port B pin 15, 5V tolerant, supports RTC_REFIN/TIM1/TIM8/TIM15/SPI2/DFSDM/TSC/LCD/SWPMI1/SAI2 |+| 37 | PC6 | bidirectional | GPIO port C pin 6, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2 |+| 38 | PC7 | bidirectional | GPIO port C pin 7, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2 |+| 39 | PC8 | bidirectional | GPIO port C pin 8, 5V tolerant, supports TIM3/TIM8/TSC/LCD/SDMMC1 |+| 40 | PC9 | bidirectional | GPIO port C pin 9, 5V tolerant, supports TIM3/TIM8/OTG_FS_NOE/LCD/SDMMC1/SAI2, TIM8_BKIN2_COMP1 |+| 41 | PA8 | bidirectional | GPIO port A pin 8, 5V tolerant, supports MCO/TIM1/USART1/OTG_FS_SOF/LCD/LPTIM2 |+| 42 | PA9 | bidirectional | GPIO port A pin 9, 5V tolerant with USB supply, supports TIM1/USART1/LCD/TIM15, OTG_FS_VBUS monitoring |+| 43 | PA10 | bidirectional | GPIO port A pin 10, 5V tolerant with USB supply, supports TIM1/USART1/OTG_FS_ID/LCD/TIM17 |+| 44 | PA11 | bidirectional | GPIO port A pin 11, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_RX/OTG_FS_DM, TIM1_BKIN2_COMP1 |+| 45 | PA12 | bidirectional | GPIO port A pin 12, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_TX/OTG_FS_DP |+| 46 | PA13 | bidirectional | JTAG/SWD debug pin (JTMS-SWDIO), 5V tolerant, internal pull-up activated after reset |+| 47 | VSS | power_in | Digital ground connection for power supply domain |+| 48 | VDDUSB | power_in | USB supply voltage (3.0-3.6V) for OTG_FS module operation |+| 49 | PA14 | bidirectional | JTAG/SWD debug clock pin (JTCK-SWCLK), 5V tolerant, internal pull-down activated after reset |+| 50 | PA15 | bidirectional | JTAG debug input pin (JTDI), 5V tolerant, supports TIM2/SPI1/SPI3/UART4/TSC/LCD/SAI2, internal pull-up after reset |+| 51 | PC10 | bidirectional | GPIO port C pin 10, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2 |+| 52 | PC11 | bidirectional | GPIO port C pin 11, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2 |+| 53 | PC12 | bidirectional | GPIO port C pin 12, 5V tolerant, supports SPI3/USART3/UART5/TSC/LCD/SDMMC1/SAI2 |+| 54 | PD2 | bidirectional | GPIO port D pin 2, 5V tolerant, supports TIM3/USART3/UART5/TSC/LCD/SDMMC1 |+| 55 | PB3 | bidirectional | JTAG debug output pin (JTDO-TRACESWO), 5V tolerant, supports TIM2/SPI1/SPI3/USART1/LCD/SAI1, COMP2_INM, internal pull-up after reset |+| 56 | PB4 | bidirectional | JTAG reset pin (NJTRST), 5V tolerant, supports TIM3/SPI1/SPI3/USART1/UART5/TSC/LCD/SAI1/TIM17, COMP2_INP, internal pull-up after reset |+| 57 | PB5 | bidirectional | GPIO port B pin 5, 5V tolerant, supports LPTIM1/TIM3/I2C1/SPI1/SPI3/USART1/UART5/TSC/LCD/COMP2/SAI1/TIM16 |+| 58 | PB6 | bidirectional | GPIO port B pin 6, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/TSC/SAI1/TIM16, COMP2_INP, TIM8_BKIN2_COMP2 |+| 59 | PB7 | bidirectional | GPIO port B pin 7, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/UART4/TSC/LCD/FMC/SAI1/TIM17, COMP2_INM, PVD_IN |+| 60 | BOOT0 | input | Boot configuration input pin (active high, 0-9V), selects between main Flash (low) or system bootloader (high) |+| 61 | PB8 | bidirectional | GPIO port B pin 8, 5V tolerant, supports TIM4/I2C1/DFSDM/CAN1_RX/LCD/SDMMC1/SAI1/TIM16 |+| 62 | PB9 | bidirectional | GPIO port B pin 9, 5V tolerant, supports IR_OUT/TIM4/I2C1/SPI2/DFSDM/CAN1_TX/LCD/SDMMC1/SAI1/TIM17 |+| 63 | VSS | power_in | Digital ground connection for power supply domain |+| 64 | VDD | power_in | Main supply voltage (1.71-3.6V) for MCU core operation |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32L476RET6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32l476ret6-etched.step` / `stm32l476ret6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l476ret6.step` / `stm32l476ret6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8569645924765274112) (232 pp, sha256 `9cc18092f1a2d4f2`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32l476ret6-datasheet.pdf)
page.jsonadded+493
@@ -0,0 +1,493 @@+{+  "slug": "stm32l476ret6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32l476ret6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32l476ret6.kicad_sym",+    "stm32l476ret6.kicad_mod",+    "stm32l476ret6.glb",+    "stm32l476ret6.step",+    "stm32l476ret6.lbr",+    "docs/hero.png",+    "docs/stm32l476ret6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32L476RET6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8569645924765274112",+    "parts": {+      "symbol": "stm32l476ret6.kicad_sym",+      "footprint": "stm32l476ret6.kicad_mod",+      "model_3d": "stm32l476ret6-etched.glb",+      "model_3d_plain": "stm32l476ret6.glb",+      "model_3d_step": "stm32l476ret6-etched.step",+      "model_3d_step_plain": "stm32l476ret6.step",+      "lbr": "stm32l476ret6.lbr"+    },+    "distributor_links": {+      "lcsc": "C71075",+      "digikey": "497-15872-ND",+      "mouser": "511-STM32L476RET6"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T23:12:19Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-15872-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32L476RET6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup battery supply voltage (1.55-3.6V) powering RTC and 32x32-bit backup registers"+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO port C pin 13, 5V tolerant, supports RTC tamper/timestamp/wakeup alternate functions"+      },+      {+        "number": "3",+        "name": "PC14",+        "type": "bidirectional",+        "description": "GPIO port C pin 14 (32 kHz oscillator input), 5V tolerant, analog input in reset state"+      },+      {+        "number": "4",+        "name": "PC15",+        "type": "bidirectional",+        "description": "GPIO port C pin 15 (32 kHz oscillator output), 5V tolerant, analog input in reset state"+      },+      {+        "number": "5",+        "name": "PH0",+        "type": "bidirectional",+        "description": "GPIO port H pin 0 (main oscillator input), 5V tolerant, analog input in reset state"+      },+      {+        "number": "6",+        "name": "PH1",+        "type": "bidirectional",+        "description": "GPIO port H pin 1 (main oscillator output), 5V tolerant, analog input in reset state"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "System reset pin (active low) with embedded weak pull-up resistor (25-55 kΩ)"+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO port C pin 0, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN1 input"+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO port C pin 1, 5V tolerant, supports LPTIM1/I2C3/DFSDM/LPUART1/LCD, ADC123_IN2 input"+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO port C pin 2, 5V tolerant, supports LPTIM1/SPI2/DFSDM/LCD, ADC123_IN3 input"+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO port C pin 3, 5V tolerant, supports LPTIM1/SPI2/LCD_VLCD/SAI1/LPTIM2, ADC123_IN4 input"+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference for ADC/DAC/OPAMP/COMP, must be connected to VSS"+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply voltage (1.62-3.6V minimum 1.8V for DAC/OPAMP, 2.4V for VREFBUF)"+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO port A pin 0, 5V tolerant, supports TIM2/TIM5/TIM8/USART2/UART4/SAI1, OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1"+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1, 5V tolerant, supports TIM2/TIM5/USART2/UART4/LCD/TIM15, OPAMP1_VINM, ADC12_IN6"+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2, 5V tolerant, supports TIM2/TIM5/USART2/LCD/SAI2/TIM15, ADC12_IN7, WKUP4/LSCO"+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3, 3.6V tolerant, supports TIM2/TIM5/USART2/LCD/TIM15, OPAMP1_VOUT, ADC12_IN8"+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground connection for power supply domain"+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Main supply voltage (1.71-3.6V) for MCU core operation"+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4, 3.6V tolerant, supports SPI1/SPI3/USART2/SAI1/LPTIM2, ADC12_IN9, DAC1_OUT1"+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5, 3.6V tolerant, supports TIM2/TIM8/SPI1/LPTIM2, ADC12_IN10, DAC1_OUT2"+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A pin 6, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/USART3/QUADSPI/LCD/TIM16, OPAMP2_VINP, ADC12_IN11, COMP2_BKIN"+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A pin 7, 5V tolerant, supports TIM1/TIM3/TIM8/SPI1/QUADSPI/LCD/TIM17, OPAMP2_VINM, ADC12_IN12"+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO port C pin 4, 5V tolerant, supports USART3/LCD, COMP1_INM, ADC12_IN13"+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO port C pin 5, 5V tolerant, supports USART3/LCD, COMP1_INP, ADC12_IN14, WKUP5"+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B pin 0, 3.6V tolerant, supports TIM1/TIM3/TIM8/USART3/QUADSPI/LCD/COMP1, OPAMP2_VOUT, ADC12_IN15"+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1, 5V tolerant, supports TIM1/TIM3/TIM8/DFSDM/USART3/QUADSPI/LCD/LPTIM2, COMP1_INM, ADC12_IN16"+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO port B pin 2, 5V tolerant, supports RTC_OUT/LPTIM1/I2C3/DFSDM, COMP1_INP"+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B pin 10, 5V tolerant, supports TIM2/I2C2/SPI2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP1/SAI1"+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO port B pin 11, 5V tolerant, supports TIM2/I2C2/DFSDM/USART3/LPUART1/QUADSPI/LCD/COMP2"+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground connection for power supply domain"+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Main supply voltage (1.71-3.6V) for MCU core operation"+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B pin 12, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2"+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B pin 13, 5V tolerant, supports TIM1/TIM15/I2C2/SPI2/DFSDM/USART3/LPUART1/TSC/LCD/SWPMI1/SAI2"+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B pin 14, 5V tolerant, supports TIM1/TIM8/TIM15/I2C2/SPI2/DFSDM/USART3/TSC/LCD/SWPMI1/SAI2"+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B pin 15, 5V tolerant, supports RTC_REFIN/TIM1/TIM8/TIM15/SPI2/DFSDM/TSC/LCD/SWPMI1/SAI2"+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO port C pin 6, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2"+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO port C pin 7, 5V tolerant, supports TIM3/TIM8/DFSDM/TSC/LCD/SDMMC1/SAI2"+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO port C pin 8, 5V tolerant, supports TIM3/TIM8/TSC/LCD/SDMMC1"+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO port C pin 9, 5V tolerant, supports TIM3/TIM8/OTG_FS_NOE/LCD/SDMMC1/SAI2, TIM8_BKIN2_COMP1"+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A pin 8, 5V tolerant, supports MCO/TIM1/USART1/OTG_FS_SOF/LCD/LPTIM2"+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A pin 9, 5V tolerant with USB supply, supports TIM1/USART1/LCD/TIM15, OTG_FS_VBUS monitoring"+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A pin 10, 5V tolerant with USB supply, supports TIM1/USART1/OTG_FS_ID/LCD/TIM17"+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A pin 11, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_RX/OTG_FS_DM, TIM1_BKIN2_COMP1"+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A pin 12, USB supply (3.0-3.6V), supports TIM1/USART1/CAN1_TX/OTG_FS_DP"+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "JTAG/SWD debug pin (JTMS-SWDIO), 5V tolerant, internal pull-up activated after reset"+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground connection for power supply domain"+      },+      {+        "number": "48",+        "name": "VDDUSB",+        "type": "power_in",+        "description": "USB supply voltage (3.0-3.6V) for OTG_FS module operation"+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "JTAG/SWD debug clock pin (JTCK-SWCLK), 5V tolerant, internal pull-down activated after reset"+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "JTAG debug input pin (JTDI), 5V tolerant, supports TIM2/SPI1/SPI3/UART4/TSC/LCD/SAI2, internal pull-up after reset"+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO port C pin 10, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2"+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO port C pin 11, 5V tolerant, supports SPI3/USART3/UART4/TSC/LCD/SDMMC1/SAI2"+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO port C pin 12, 5V tolerant, supports SPI3/USART3/UART5/TSC/LCD/SDMMC1/SAI2"+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO port D pin 2, 5V tolerant, supports TIM3/USART3/UART5/TSC/LCD/SDMMC1"+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "JTAG debug output pin (JTDO-TRACESWO), 5V tolerant, supports TIM2/SPI1/SPI3/USART1/LCD/SAI1, COMP2_INM, internal pull-up after reset"+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "JTAG reset pin (NJTRST), 5V tolerant, supports TIM3/SPI1/SPI3/USART1/UART5/TSC/LCD/SAI1/TIM17, COMP2_INP, internal pull-up after reset"+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B pin 5, 5V tolerant, supports LPTIM1/TIM3/I2C1/SPI1/SPI3/USART1/UART5/TSC/LCD/COMP2/SAI1/TIM16"+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B pin 6, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/TSC/SAI1/TIM16, COMP2_INP, TIM8_BKIN2_COMP2"+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B pin 7, 5V tolerant, supports LPTIM1/TIM4/TIM8/I2C1/DFSDM/USART1/UART4/TSC/LCD/FMC/SAI1/TIM17, COMP2_INM, PVD_IN"+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot configuration input pin (active high, 0-9V), selects between main Flash (low) or system bootloader (high)"+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B pin 8, 5V tolerant, supports TIM4/I2C1/DFSDM/CAN1_RX/LCD/SDMMC1/SAI1/TIM16"+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B pin 9, 5V tolerant, supports IR_OUT/TIM4/I2C1/SPI2/DFSDM/CAN1_TX/LCD/SDMMC1/SAI1/TIM17"+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground connection for power supply domain"+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Main supply voltage (1.71-3.6V) for MCU core operation"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PC14 and PC15 operate through power switch limited to 3mA max current, speed limited to 2MHz with 30; PA13, PA14, PA15, PB3, PB4 configured as JTAG/SWD debug functions with internal pull-up/pull-down af"+        ],+        "pages_sent": 78,+        "cost_usd": 1.3645,+        "at": "2026-09-24T23:11:41"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8569645924765274112",+        "pages": 232,+        "sha256": "9cc18092f1a2d4f2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file