main
History Download
Ray Publish 0.2.0 5ee4b8d

STM32L452CEU6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · QFN-48-EP(7x7)

STM32L452CEU6 from STMicroelectronics, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VBAT power_in Backup battery supply voltage (1.55 to 3.6 V) for RTC and backup registers.
2 PC13 bidirectional Digital I/O with alternate function EVENTOUT; RTC tamper input, timestamp, and wakeup pin.
3 PC14-OSC32_IN (PC14) bidirectional Digital I/O that can configure as 32 kHz oscillator input (OSC32_IN) with EVENTOUT alternate function.
4 PC15-OSC32_OUT (PC15) bidirectional Digital I/O that can configure as 32 kHz oscillator output (OSC32_OUT) with EVENTOUT alternate function.
5 PH0-OSC_IN (PH0) bidirectional
6 PH1-OSC_OUT (PH1) bidirectional
7 NRST input
8 VSSA/VREF- power_in Analog ground and negative reference voltage (0 V) for ADC, DAC, OPAMP, and COMP peripherals.
9 VDDA/VREF+ power_in Analog supply voltage (1.62 to 3.6 V) and positive reference for ADC, DAC, OPAMP, COMP, and VREFBUF.
10 PA0 bidirectional GPIO with alternate functions for TIM2 (CH1, ETR), USART2 (CTS), COMP1 output, SAI1 external clock, and ADC1_IN5.
11 PA1 bidirectional GPIO with alternate functions for TIM2 (CH2), I2C1 (SMBA), SPI1 (SCK), USART2 (RTS_DE), TIM15 (CH1N), and ADC1_IN6.
12 PA2 bidirectional GPIO with alternate functions for TIM2 (CH3), USART2 (TX), LPUART1 (TX), QUADSPI (BK1_NCS), TIM15 (CH1), and ADC1_IN7.
13 PA3 bidirectional GPIO with alternate functions for TIM2 (CH4), USART2 (RX), LPUART1 (RX), QUADSPI (CLK), SAI1 (MCLK_A), TIM15 (CH2), and ADC1_IN8.
14 PA4 bidirectional GPIO with alternate functions for SPI1 (NSS), SPI3 (NSS), USART2 (CK), SAI1 (FS_B), LPTIM2 (OUT), DAC1 (OUT1), and ADC1_IN9.
15 PA5 bidirectional GPIO with alternate functions for TIM2 (CH1, ETR), SPI1 (SCK), DFSDM1 (CKOUT), LPTIM2 (ETR), and ADC1_IN10.
16 PA6 bidirectional GPIO with alternate functions for TIM1 (BKIN, BKIN_COMP2), TIM3 (CH1), SPI1 (MISO), COMP1 output, USART3 (CTS), LPUART1 (CTS), QUADSPI (BK1_IO3), TIM16 (CH1), and ADC1_IN11.
17 PA7 bidirectional GPIO with alternate functions for TIM1 (CH1N), TIM3 (CH2), I2C3 (SCL), SPI1 (MOSI), DFSDM1 (DATIN0), QUADSPI (BK1_IO2), COMP2 output, and ADC1_IN12.
18 PB0 bidirectional GPIO with alternate functions for TIM1 (CH2N), TIM3 (CH3), SPI1 (NSS), DFSDM1 (CKIN0), USART3 (CK), QUADSPI (BK1_IO1), COMP1 output, SAI1 (EXTCLK), and ADC1_IN15.
19 PB1 bidirectional GPIO with alternate functions for TIM1 (CH3N), TIM3 (CH4), DFSDM1 (DATIN0), USART3 (RTS_DE), LPUART1 (RTS_DE), QUADSPI (BK1_IO0), LPTIM2 (IN1), and ADC1_IN16.
20 PB2 bidirectional GPIO with alternate functions for RTC (OUT), LPTIM1 (OUT), I2C3 (SMBA), DFSDM1 (CKIN0), and COMP1 input.
21 PB10 bidirectional GPIO with alternate functions for TIM2 (CH3), I2C4 (SCL), I2C2 (SCL), SPI2 (SCK), USART3 (TX), LPUART1 (RX), TSC (SYNC), QUADSPI (CLK), COMP1 output, and SAI1 (SCK_A).
22 PB11 bidirectional GPIO with alternate functions for TIM2 (CH4), I2C4 (SDA), I2C2 (SDA), USART3 (RX), LPUART1 (TX), QUADSPI (BK1_NCS), and COMP2 output.
23 VSS power_in Ground reference pin for digital logic (0 V reference).
24 VDD power_in Main digital supply voltage (1.71 to 3.6 V) for core and I/O logic.
25 PB12 bidirectional GPIO with alternate functions for TIM1 (BKIN, BKIN_COMP2), I2C2 (SMBA), SPI2 (NSS), DFSDM1 (DATIN1), USART3 (CK), LPUART1 (RTS_DE), TSC (G1_IO1), CAN1 (RX), SAI1 (FS_A), and TIM15 (BKIN).
26 PB13 bidirectional GPIO with alternate functions for TIM1 (CH1N), I2C2 (SCL), SPI2 (SCK), DFSDM1 (CKIN1), USART3 (CTS), LPUART1 (CTS), TSC (G1_IO2), CAN1 (TX), SAI1 (SCK_A), and TIM15 (CH1N).
27 PB14 bidirectional GPIO with alternate functions for TIM1 (CH2N), I2C2 (SDA), SPI2 (MISO), DFSDM1 (DATIN2), USART3 (RTS_DE), TSC (G1_IO3), SAI1 (MCLK_A), and TIM15 (CH1).
28 PB15 bidirectional GPIO with alternate functions for RTC (REFIN), TIM1 (CH3N), SPI2 (MOSI), DFSDM1 (CKIN2), TSC (G1_IO4), SAI1 (SD_A), and TIM15 (CH2).
29 PA8 bidirectional GPIO with alternate functions for MCO (master clock output), TIM1 (CH1), DFSDM1 (CKIN1), USART1 (CK), SAI1 (SCK_A), and LPTIM2 (OUT).
30 PA9 bidirectional GPIO with alternate functions for TIM1 (CH2), I2C1 (SCL), DFSDM1 (DATIN1), USART1 (TX), SAI1 (FS_A), and TIM15 (BKIN).
31 PA10 bidirectional GPIO with alternate functions for TIM1 (CH3), I2C1 (SDA), USART1 (RX), USB (CRS_SYNC), and SAI1 (SD_A).
32 PA11 bidirectional GPIO with alternate functions for TIM1 (CH4, BKIN2, BKIN2_COMP1), SPI1 (MISO), COMP1 output, USART1 (CTS), CAN1 (RX), and USB (DM).
33 PA12 bidirectional GPIO with alternate functions for TIM1 (ETR), SPI1 (MOSI), USART1 (RTS_DE), CAN1 (TX), and USB (DP).
34 PA13 (JTMS/SWDIO) bidirectional JTAG/SWD debug pin (SWDIO) with internal pull-up after reset; alternate functions for IR output, USB (NOE), and SAI1 (SD_B).
35 VSS power_in Ground reference pin for digital logic (0 V reference).
36 VDDUSB power_in USB supply voltage (3.0 to 3.6 V) dedicated for USB interface.
37 PA14 (JTCK/SWCLK) bidirectional JTAG/SWD debug pin (SWCLK) with internal pull-down after reset; alternate functions for LPTIM1 (OUT), I2C1 (SMBA), I2C4 (SMBA), and SAI1 (FS_B).
38 PA15 (JTDI) bidirectional JTAG debug pin (JTDI) with internal pull-up after reset; alternate functions for TIM2 (CH1, ETR), USART2 (RX), SPI1 (NSS), SPI3 (NSS), USART3 (RTS_DE), UART4 (RTS_DE), and TSC (G3_IO1).
39 PB3 (JTDO/TRACESWO) bidirectional JTAG debug and trace pin (JTDO/TRACESWO); alternate functions for TIM2 (CH2), SPI1 (SCK), SPI3 (SCK), USART1 (RTS_DE), and SAI1 (SCK_B); COMP2 input.
40 PB4 (NJTRST) bidirectional JTAG reset pin (NJTRST) for debug; alternate functions for TIM3 (CH1), I2C3 (SDA), SPI1 (MISO), SPI3 (MISO), USART1 (CTS), TSC (G2_IO1), and SAI1 (MCLK_B); COMP2 input.
41 PB5 bidirectional GPIO with alternate functions for LPTIM1 (IN1), TIM3 (CH2), CAN1 (RX), I2C1 (SMBA), SPI1 (MOSI), SPI3 (MOSI), USART1 (CK), TSC (G2_IO2), COMP2 output, SAI1 (SD_B), and TIM16 (BKIN).
42 PB6 bidirectional GPIO with alternate functions for LPTIM1 (ETR), I2C1 (SCL), I2C4 (SCL), USART1 (TX), CAN1 (TX), TSC (G2_IO3), SAI1 (FS_B), and TIM16 (CH1N); COMP2 input.
43 PB7 bidirectional GPIO with alternate functions for LPTIM1 (IN2), I2C1 (SDA), I2C4 (SDA), USART1 (RX), UART4 (CTS), TSC (G2_IO4); COMP2 input and PVD input.
44 PH3-BOOT0 (BOOT0) bidirectional Boot mode selection pin for device startup; GPIO with EVENTOUT alternate function.
45 PB8 bidirectional GPIO with alternate functions for I2C1 (SCL), CAN1 (RX), SDMMC1 (D4), SAI1 (MCLK_A), and TIM16 (CH1).
46 PB9 bidirectional GPIO with alternate functions for IR output, I2C1 (SDA), SPI2 (NSS), CAN1 (TX), SDMMC1 (D5), and SAI1 (FS_A).
47 VSS power_in Ground reference pin for digital logic (0 V reference).
48 VDD power_in Main digital supply voltage (1.71 to 3.6 V) for core and I/O logic.
49 EP passive ST DocID029968 Rev 3 p.202 (UFQFPN48 package information): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.'

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package QFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDD, VDDA, VDDUSB, VBAT) VDDX - VSS -0.3 4 V 88
Input voltage on FT_xxx pins VIN -0.3 V Max = min(VDD, VDDA, VDDUSB) + 4.0 (notes 3, 4) 88
Input voltage on TT_xx pins VIN -0.3 4 V 88
Input voltage on any other pins VIN -0.3 4 V 88
Variations between different VDDX power pins of the same domain /∆VDDx/ 50 mV 89
Variations between all the different ground pins (includes VREF-) /VSSx-VSS/ 50 mV 89
Total current into sum of all VDD power lines (source) ∑IVDD 140 mA 89
Total current out of sum of all VSS ground lines (sink) ∑IVSS 140 mA 89
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 89
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 89
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 89
Output current sunk by any FT_f pin IIO(PIN) 20 mA 89
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 89
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 89
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 89
Injected current on FT_xxx, TT_xx, RST and B pins IINJ(PIN) -5 0 mA Except PA4, PA5 89
Injected current on PA4, PA5 IINJ(PIN) -5 0 mA PA4, PA5 89
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 89
Storage temperature range TSTG -65 150 °C 90
Maximum junction temperature TJ 150 °C 90
Internal AHB clock frequency fHCLK 0 80 MHz 91
Internal APB1 clock frequency fPCLK1 0 80 MHz 91
Internal APB2 clock frequency fPCLK2 0 80 MHz 91
Standard operating voltage (VDD) VDD 1.71 3.6 V 91
Analog supply voltage VDDA 1.62 3.6 V ADC or COMP used 91
Analog supply voltage VDDA 1.8 3.6 V DAC or OPAMP used 91
Analog supply voltage VDDA 2.4 3.6 V VREFBUF used 91
Analog supply voltage VDDA 0 3.6 V ADC, DAC, OPAMP, COMP, VREFBUF not used 91
Backup operating voltage VBAT 1.55 3.6 V 91
USB supply voltage VDDUSB 3 3.6 V USB used 91
USB supply voltage VDDUSB 0 3.6 V USB not used 91
I/O input voltage on TT_xx I/O VIN -0.3 V Max = VDDIOx + 0.3 91
I/O input voltage on all I/O except TT_xx VIN -0.3 V Max = MIN(MIN(VDD, VDDA, VDDUSB)+3.6 V, 5.5 V) 91
Power dissipation, UFQFPN48 (7x7) PD 690 mW TA = 85 °C for suffix 6 91
Ambient temperature, suffix 6 version, maximum power dissipation TA -40 85 °C Maximum power dissipation 92
Ambient temperature, suffix 6 version, low-power dissipation TA -40 105 °C Low-power dissipation 92
Junction temperature range, suffix 6 version TJ -40 105 °C Suffix 6 version 92
VDD rise time rate tVDD 0 µs/V 92
VDD fall time rate tVDD 10 µs/V 92
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 µs VDD rising 92
Brown-out reset threshold 0 VBOR0 1.62 1.66 1.7 V Rising edge 92
Brown-out reset threshold 0 VBOR0 1.6 1.64 1.69 V Falling edge 92
Brown-out reset threshold 1 VBOR1 2.06 2.1 2.14 V Rising edge 93
Brown-out reset threshold 1 VBOR1 1.96 2 2.04 V Falling edge 93
BOR (except BOR0) and PVD consumption from VDD IDD(BOR_PVD) 1.1 1.6 µA 93
VDDUSB peripheral voltage monitoring VPVM1 1.18 1.22 1.26 V 93
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 95
ADC sampling time when reading the internal reference voltage tS_vrefint 4 µs 95
Start time of reference voltage buffer when ADC is enabled tstart_vrefint 8 12 µs 95
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) 12.5 20 µA 95
Internal reference voltage spread over the temperature range ∆VREFINT 5 7.5 mV VDD = 3 V 95
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 95
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 95
1/4 reference voltage VREFINT_DIV1 24 25 26 % 95
1/2 reference voltage VREFINT_DIV2 49 50 51 % 95
3/4 reference voltage VREFINT_DIV3 74 75 76 % 95
Supply current in Run mode, Range 1, 80 MHz, 25 °C IDD_ALL(Run) 8.45 9.45 mA Range 1, fHCLK = 80 MHz, 25 °C, code from Flash, ART enable, all peripherals disabled 98
Supply current in Low-power run mode, 2 MHz, 25 °C IDD_ALL(LPRun) 225 275 µA fHCLK = fMSI = 2 MHz, 25 °C, all peripherals disabled 98
Supply current in Stop 2 mode, RTC disabled, 1.8 V, 25 °C IDD_ALL(Stop 2) 2.05 4 µA RTC disabled, VDD = 1.8 V, 25 °C 111
Supply current in Stop 2 mode, RTC disabled, 3.6 V, 25 °C IDD_ALL(Stop 2) 2.05 4.2 µA RTC disabled, VDD = 3.6 V, 25 °C 111

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32L452CEU6
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l452ceu6-etched.step / stm32l452ceu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l452ceu6.step / stm32l452ceu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (210 pp, sha256 eeeaa72ec16c85ea, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF