Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L452CEU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · QFN-48-EP(7x7)
STM32L452CEU6 from STMicroelectronics, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup battery supply voltage (1.55 to 3.6 V) for RTC and backup registers. |
| 2 | PC13 | bidirectional | Digital I/O with alternate function EVENTOUT; RTC tamper input, timestamp, and wakeup pin. |
| 3 | PC14-OSC32_IN (PC14) | bidirectional | Digital I/O that can configure as 32 kHz oscillator input (OSC32_IN) with EVENTOUT alternate function. |
| 4 | PC15-OSC32_OUT (PC15) | bidirectional | Digital I/O that can configure as 32 kHz oscillator output (OSC32_OUT) with EVENTOUT alternate function. |
| 5 | PH0-OSC_IN (PH0) | bidirectional | |
| 6 | PH1-OSC_OUT (PH1) | bidirectional | |
| 7 | NRST | input | |
| 8 | VSSA/VREF- | power_in | Analog ground and negative reference voltage (0 V) for ADC, DAC, OPAMP, and COMP peripherals. |
| 9 | VDDA/VREF+ | power_in | Analog supply voltage (1.62 to 3.6 V) and positive reference for ADC, DAC, OPAMP, COMP, and VREFBUF. |
| 10 | PA0 | bidirectional | GPIO with alternate functions for TIM2 (CH1, ETR), USART2 (CTS), COMP1 output, SAI1 external clock, and ADC1_IN5. |
| 11 | PA1 | bidirectional | GPIO with alternate functions for TIM2 (CH2), I2C1 (SMBA), SPI1 (SCK), USART2 (RTS_DE), TIM15 (CH1N), and ADC1_IN6. |
| 12 | PA2 | bidirectional | GPIO with alternate functions for TIM2 (CH3), USART2 (TX), LPUART1 (TX), QUADSPI (BK1_NCS), TIM15 (CH1), and ADC1_IN7. |
| 13 | PA3 | bidirectional | GPIO with alternate functions for TIM2 (CH4), USART2 (RX), LPUART1 (RX), QUADSPI (CLK), SAI1 (MCLK_A), TIM15 (CH2), and ADC1_IN8. |
| 14 | PA4 | bidirectional | GPIO with alternate functions for SPI1 (NSS), SPI3 (NSS), USART2 (CK), SAI1 (FS_B), LPTIM2 (OUT), DAC1 (OUT1), and ADC1_IN9. |
| 15 | PA5 | bidirectional | GPIO with alternate functions for TIM2 (CH1, ETR), SPI1 (SCK), DFSDM1 (CKOUT), LPTIM2 (ETR), and ADC1_IN10. |
| 16 | PA6 | bidirectional | GPIO with alternate functions for TIM1 (BKIN, BKIN_COMP2), TIM3 (CH1), SPI1 (MISO), COMP1 output, USART3 (CTS), LPUART1 (CTS), QUADSPI (BK1_IO3), TIM16 (CH1), and ADC1_IN11. |
| 17 | PA7 | bidirectional | GPIO with alternate functions for TIM1 (CH1N), TIM3 (CH2), I2C3 (SCL), SPI1 (MOSI), DFSDM1 (DATIN0), QUADSPI (BK1_IO2), COMP2 output, and ADC1_IN12. |
| 18 | PB0 | bidirectional | GPIO with alternate functions for TIM1 (CH2N), TIM3 (CH3), SPI1 (NSS), DFSDM1 (CKIN0), USART3 (CK), QUADSPI (BK1_IO1), COMP1 output, SAI1 (EXTCLK), and ADC1_IN15. |
| 19 | PB1 | bidirectional | GPIO with alternate functions for TIM1 (CH3N), TIM3 (CH4), DFSDM1 (DATIN0), USART3 (RTS_DE), LPUART1 (RTS_DE), QUADSPI (BK1_IO0), LPTIM2 (IN1), and ADC1_IN16. |
| 20 | PB2 | bidirectional | GPIO with alternate functions for RTC (OUT), LPTIM1 (OUT), I2C3 (SMBA), DFSDM1 (CKIN0), and COMP1 input. |
| 21 | PB10 | bidirectional | GPIO with alternate functions for TIM2 (CH3), I2C4 (SCL), I2C2 (SCL), SPI2 (SCK), USART3 (TX), LPUART1 (RX), TSC (SYNC), QUADSPI (CLK), COMP1 output, and SAI1 (SCK_A). |
| 22 | PB11 | bidirectional | GPIO with alternate functions for TIM2 (CH4), I2C4 (SDA), I2C2 (SDA), USART3 (RX), LPUART1 (TX), QUADSPI (BK1_NCS), and COMP2 output. |
| 23 | VSS | power_in | Ground reference pin for digital logic (0 V reference). |
| 24 | VDD | power_in | Main digital supply voltage (1.71 to 3.6 V) for core and I/O logic. |
| 25 | PB12 | bidirectional | GPIO with alternate functions for TIM1 (BKIN, BKIN_COMP2), I2C2 (SMBA), SPI2 (NSS), DFSDM1 (DATIN1), USART3 (CK), LPUART1 (RTS_DE), TSC (G1_IO1), CAN1 (RX), SAI1 (FS_A), and TIM15 (BKIN). |
| 26 | PB13 | bidirectional | GPIO with alternate functions for TIM1 (CH1N), I2C2 (SCL), SPI2 (SCK), DFSDM1 (CKIN1), USART3 (CTS), LPUART1 (CTS), TSC (G1_IO2), CAN1 (TX), SAI1 (SCK_A), and TIM15 (CH1N). |
| 27 | PB14 | bidirectional | GPIO with alternate functions for TIM1 (CH2N), I2C2 (SDA), SPI2 (MISO), DFSDM1 (DATIN2), USART3 (RTS_DE), TSC (G1_IO3), SAI1 (MCLK_A), and TIM15 (CH1). |
| 28 | PB15 | bidirectional | GPIO with alternate functions for RTC (REFIN), TIM1 (CH3N), SPI2 (MOSI), DFSDM1 (CKIN2), TSC (G1_IO4), SAI1 (SD_A), and TIM15 (CH2). |
| 29 | PA8 | bidirectional | GPIO with alternate functions for MCO (master clock output), TIM1 (CH1), DFSDM1 (CKIN1), USART1 (CK), SAI1 (SCK_A), and LPTIM2 (OUT). |
| 30 | PA9 | bidirectional | GPIO with alternate functions for TIM1 (CH2), I2C1 (SCL), DFSDM1 (DATIN1), USART1 (TX), SAI1 (FS_A), and TIM15 (BKIN). |
| 31 | PA10 | bidirectional | GPIO with alternate functions for TIM1 (CH3), I2C1 (SDA), USART1 (RX), USB (CRS_SYNC), and SAI1 (SD_A). |
| 32 | PA11 | bidirectional | GPIO with alternate functions for TIM1 (CH4, BKIN2, BKIN2_COMP1), SPI1 (MISO), COMP1 output, USART1 (CTS), CAN1 (RX), and USB (DM). |
| 33 | PA12 | bidirectional | GPIO with alternate functions for TIM1 (ETR), SPI1 (MOSI), USART1 (RTS_DE), CAN1 (TX), and USB (DP). |
| 34 | PA13 (JTMS/SWDIO) | bidirectional | JTAG/SWD debug pin (SWDIO) with internal pull-up after reset; alternate functions for IR output, USB (NOE), and SAI1 (SD_B). |
| 35 | VSS | power_in | Ground reference pin for digital logic (0 V reference). |
| 36 | VDDUSB | power_in | USB supply voltage (3.0 to 3.6 V) dedicated for USB interface. |
| 37 | PA14 (JTCK/SWCLK) | bidirectional | JTAG/SWD debug pin (SWCLK) with internal pull-down after reset; alternate functions for LPTIM1 (OUT), I2C1 (SMBA), I2C4 (SMBA), and SAI1 (FS_B). |
| 38 | PA15 (JTDI) | bidirectional | JTAG debug pin (JTDI) with internal pull-up after reset; alternate functions for TIM2 (CH1, ETR), USART2 (RX), SPI1 (NSS), SPI3 (NSS), USART3 (RTS_DE), UART4 (RTS_DE), and TSC (G3_IO1). |
| 39 | PB3 (JTDO/TRACESWO) | bidirectional | JTAG debug and trace pin (JTDO/TRACESWO); alternate functions for TIM2 (CH2), SPI1 (SCK), SPI3 (SCK), USART1 (RTS_DE), and SAI1 (SCK_B); COMP2 input. |
| 40 | PB4 (NJTRST) | bidirectional | JTAG reset pin (NJTRST) for debug; alternate functions for TIM3 (CH1), I2C3 (SDA), SPI1 (MISO), SPI3 (MISO), USART1 (CTS), TSC (G2_IO1), and SAI1 (MCLK_B); COMP2 input. |
| 41 | PB5 | bidirectional | GPIO with alternate functions for LPTIM1 (IN1), TIM3 (CH2), CAN1 (RX), I2C1 (SMBA), SPI1 (MOSI), SPI3 (MOSI), USART1 (CK), TSC (G2_IO2), COMP2 output, SAI1 (SD_B), and TIM16 (BKIN). |
| 42 | PB6 | bidirectional | GPIO with alternate functions for LPTIM1 (ETR), I2C1 (SCL), I2C4 (SCL), USART1 (TX), CAN1 (TX), TSC (G2_IO3), SAI1 (FS_B), and TIM16 (CH1N); COMP2 input. |
| 43 | PB7 | bidirectional | GPIO with alternate functions for LPTIM1 (IN2), I2C1 (SDA), I2C4 (SDA), USART1 (RX), UART4 (CTS), TSC (G2_IO4); COMP2 input and PVD input. |
| 44 | PH3-BOOT0 (BOOT0) | bidirectional | Boot mode selection pin for device startup; GPIO with EVENTOUT alternate function. |
| 45 | PB8 | bidirectional | GPIO with alternate functions for I2C1 (SCL), CAN1 (RX), SDMMC1 (D4), SAI1 (MCLK_A), and TIM16 (CH1). |
| 46 | PB9 | bidirectional | GPIO with alternate functions for IR output, I2C1 (SDA), SPI2 (NSS), CAN1 (TX), SDMMC1 (D5), and SAI1 (FS_A). |
| 47 | VSS | power_in | Ground reference pin for digital logic (0 V reference). |
| 48 | VDD | power_in | Main digital supply voltage (1.71 to 3.6 V) for core and I/O logic. |
| 49 | EP | passive | ST DocID029968 Rev 3 p.202 (UFQFPN48 package information): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | QFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDD, VDDA, VDDUSB, VBAT) | VDDX - VSS | -0.3 | 4 | V | 88 | ||
| Input voltage on FT_xxx pins | VIN | -0.3 | V | Max = min(VDD, VDDA, VDDUSB) + 4.0 (notes 3, 4) | 88 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 88 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 88 | ||
| Variations between different VDDX power pins of the same domain | /∆VDDx/ | 50 | mV | 89 | |||
| Variations between all the different ground pins (includes VREF-) | /VSSx-VSS/ | 50 | mV | 89 | |||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 140 | mA | 89 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 140 | mA | 89 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 89 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 89 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 20 | mA | 89 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 89 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 89 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 89 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 89 | |||
| Injected current on FT_xxx, TT_xx, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Except PA4, PA5 | 89 | |
| Injected current on PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | PA4, PA5 | 89 | |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 89 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 90 | ||
| Maximum junction temperature | TJ | 150 | °C | 90 | |||
| Internal AHB clock frequency | fHCLK | 0 | 80 | MHz | 91 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 80 | MHz | 91 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 80 | MHz | 91 | ||
| Standard operating voltage (VDD) | VDD | 1.71 | 3.6 | V | 91 | ||
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 91 | |
| Analog supply voltage | VDDA | 1.8 | 3.6 | V | DAC or OPAMP used | 91 | |
| Analog supply voltage | VDDA | 2.4 | 3.6 | V | VREFBUF used | 91 | |
| Analog supply voltage | VDDA | 0 | 3.6 | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 91 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 91 | ||
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 91 | |
| USB supply voltage | VDDUSB | 0 | 3.6 | V | USB not used | 91 | |
| I/O input voltage on TT_xx I/O | VIN | -0.3 | V | Max = VDDIOx + 0.3 | 91 | ||
| I/O input voltage on all I/O except TT_xx | VIN | -0.3 | V | Max = MIN(MIN(VDD, VDDA, VDDUSB)+3.6 V, 5.5 V) | 91 | ||
| Power dissipation, UFQFPN48 (7x7) | PD | 690 | mW | TA = 85 °C for suffix 6 | 91 | ||
| Ambient temperature, suffix 6 version, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 92 | |
| Ambient temperature, suffix 6 version, low-power dissipation | TA | -40 | 105 | °C | Low-power dissipation | 92 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 92 | |
| VDD rise time rate | tVDD | 0 | µs/V | 92 | |||
| VDD fall time rate | tVDD | 10 | µs/V | 92 | |||
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | µs | VDD rising | 92 | |
| Brown-out reset threshold 0 | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 92 |
| Brown-out reset threshold 0 | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 92 |
| Brown-out reset threshold 1 | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 93 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2 | 2.04 | V | Falling edge | 93 |
| BOR (except BOR0) and PVD consumption from VDD | IDD(BOR_PVD) | 1.1 | 1.6 | µA | 93 | ||
| VDDUSB peripheral voltage monitoring | VPVM1 | 1.18 | 1.22 | 1.26 | V | 93 | |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 95 |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 95 | |||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 95 | ||
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 12.5 | 20 | µA | 95 | ||
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3 V | 95 | |
| Temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 95 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 95 | |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % | 95 | |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % | 95 | |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % | 95 | |
| Supply current in Run mode, Range 1, 80 MHz, 25 °C | IDD_ALL(Run) | 8.45 | 9.45 | mA | Range 1, fHCLK = 80 MHz, 25 °C, code from Flash, ART enable, all peripherals disabled | 98 | |
| Supply current in Low-power run mode, 2 MHz, 25 °C | IDD_ALL(LPRun) | 225 | 275 | µA | fHCLK = fMSI = 2 MHz, 25 °C, all peripherals disabled | 98 | |
| Supply current in Stop 2 mode, RTC disabled, 1.8 V, 25 °C | IDD_ALL(Stop 2) | 2.05 | 4 | µA | RTC disabled, VDD = 1.8 V, 25 °C | 111 | |
| Supply current in Stop 2 mode, RTC disabled, 3.6 V, 25 °C | IDD_ALL(Stop 2) | 2.05 | 4.2 | µA | RTC disabled, VDD = 3.6 V, 25 °C | 111 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32L452CEU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: QFN-48-EP(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32l452ceu6-etched.step/stm32l452ceu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l452ceu6.step/stm32l452ceu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (210 pp, sha256
eeeaa72ec16c85ea, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).