component
STM32G4A1KEU6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
STM32G4A1KEU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32G4A1KEU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Standard operating voltage supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 2 | PF0-OSC_IN | bidirectional | 5 V tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; additional functions OSC_IN and ADC1_IN10, alternate functions I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N, EVENTOUT. |
| 3 | PF1-OSC_OUT | bidirectional | 5 V tolerant (FT_a) I/O with analog switch supplied by VDDA; additional functions OSC_OUT, ADC2_IN10 and COMP3_INM, alternate functions SPI2_SCK/I2S2_CK and EVENTOUT. |
| 4 | PG10-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (5 V tolerant FT I/O), alternate function MCO and EVENTOUT. |
| 5 | PA0 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR; additional ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1. |
| 6 | PA1 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions RTC_REFIN, TIM2_CH2, USART2_RTS_DE, TIM15_CH1N; additional ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM. |
| 7 | PA2 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX; additional ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO. |
| 8 | PA3 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A; additional ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP. |
| 9 | PA4 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B; additional ADC2_IN17, DAC1_OUT1, COMP1_INM. |
| 10 | PA5 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX; additional ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM. |
| 11 | PA6 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS; additional ADC2_IN3, OPAMP2_VOUT. |
| 12 | PA7 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX; additional ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP. |
| 13 | PB0 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, UCPD1_FRSTX; additional ADC1_IN15/ADC3_IN12, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP. |
| 14 | VSSA | power_in | Analog ground pin, which must be connected to the external ground within the permitted VSS variation of 50 mV. |
| 15 | VDDA/VREF+ | power_in | Analog supply pin, which is internally connected to VREF+ on this package; VDDA is 1.62 V to 3.6 V when ADC or COMP is used and 2.0 V to 3.6 V when OPAMP is used. |
| 16 | VSS | power_in | Ground pin, which must always be connected to the external power supply ground within the permitted range. |
| 17 | VDD | power_in | Standard operating voltage supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT_f) I/O that is Fm+ capable; alternate functions MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, TIM4_ETR, SAI1_CK2, SAI1_SCK_A, EVENTOUT. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT_fd) Fm+ capable I/O with UCPD dead-battery function; a high level on PA9 activates the UCPD1_CC1 pull-down (5.1 kΩ) on PB6, and additional function is UCPD1_DBCC1. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT_da) Fm+ capable I/O with UCPD dead-battery function; a high level on PA10 activates the UCPD1_CC2 pull-down (5.1 kΩ) on PB4, and additional function is UCPD1_DBCC2. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT_u) I/O with USB function; additional function USB_DM, alternate functions include SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT_u) I/O with USB function; additional function USB_DP, alternate functions include TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the SWDIO-JTMS debug function with internal pull-up activated, alternate functions include I2C1_SCL, IR_OUT, USART3_CTS and SAI1_SD_B. |
| 24 | PA14 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the SWCLK-JTCK debug function with internal pull-down activated, alternate functions include LPTIM1_OUT, I2C1_SDA, TIM8_CH2, USART2_TX and SAI1_FS_B. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the JTDI debug function with internal pull-up activated, alternate functions include TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, USART2_RX and TIM1_BKIN. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O; after reset it is the JTDO/TRACESWO debug function, alternate functions include TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, SPI1_SCK, USART2_TX and SAI1_SCK_B. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT_c) I/O with USB Type-C PD function; after reset it is the JTRST debug function with internal pull-up activated, and the UCPD1_CC2 pull-down (5.1 kΩ) is controlled by PA10. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; alternate functions include TIM16_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1 and SAI1_SD_B. |
| 29 | PB6 | bidirectional | 5 V tolerant (FT_c) I/O with USB Type-C PD function; the UCPD1_CC1 pull-down (5.1 kΩ) is activated by a high level on PA9, alternate functions include TIM16_CH1N, TIM4_CH1, TIM8_CH1, USART1_TX, FDCAN2_TX and LPTIM1_ETR. |
| 30 | PB7 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O with additional function PVD_IN; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT and LPTIM1_IN2. |
| 31 | PB8-BOOT0 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O that also serves as BOOT0 pin; it is recommended to set PB8 to a mode other than analog after startup to limit consumption if the pin is left unconnected. |
| 32 | VSS | power_in | Ground pin, which must always be connected to the external power supply ground within the permitted range. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
STM32G4A1KEU6 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
stm32g4a1keu6-etched.step/stm32g4a1keu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g4a1keu6.step/stm32g4a1keu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (200 pp, sha256
cde1526cdcf6f83b, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32G4A1KEU6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32G4A1KEU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Standard operating voltage supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 2 | PF0-OSC_IN | bidirectional | 5 V tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; additional functions OSC_IN and ADC1_IN10, alternate functions I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N, EVENTOUT. |
| 3 | PF1-OSC_OUT | bidirectional | 5 V tolerant (FT_a) I/O with analog switch supplied by VDDA; additional functions OSC_OUT, ADC2_IN10 and COMP3_INM, alternate functions SPI2_SCK/I2S2_CK and EVENTOUT. |
| 4 | PG10-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (5 V tolerant FT I/O), alternate function MCO and EVENTOUT. |
| 5 | PA0 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR; additional ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1. |
| 6 | PA1 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions RTC_REFIN, TIM2_CH2, USART2_RTS_DE, TIM15_CH1N; additional ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM. |
| 7 | PA2 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX; additional ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO. |
| 8 | PA3 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A; additional ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP. |
| 9 | PA4 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B; additional ADC2_IN17, DAC1_OUT1, COMP1_INM. |
| 10 | PA5 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX; additional ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM. |
| 11 | PA6 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS; additional ADC2_IN3, OPAMP2_VOUT. |
| 12 | PA7 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX; additional ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP. |
| 13 | PB0 | bidirectional | 3.6 V tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, UCPD1_FRSTX; additional ADC1_IN15/ADC3_IN12, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP. |
| 14 | VSSA | power_in | Analog ground pin, which must be connected to the external ground within the permitted VSS variation of 50 mV. |
| 15 | VDDA/VREF+ | power_in | Analog supply pin, which is internally connected to VREF+ on this package; VDDA is 1.62 V to 3.6 V when ADC or COMP is used and 2.0 V to 3.6 V when OPAMP is used. |
| 16 | VSS | power_in | Ground pin, which must always be connected to the external power supply ground within the permitted range. |
| 17 | VDD | power_in | Standard operating voltage supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT_f) I/O that is Fm+ capable; alternate functions MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, TIM4_ETR, SAI1_CK2, SAI1_SCK_A, EVENTOUT. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT_fd) Fm+ capable I/O with UCPD dead-battery function; a high level on PA9 activates the UCPD1_CC1 pull-down (5.1 kΩ) on PB6, and additional function is UCPD1_DBCC1. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT_da) Fm+ capable I/O with UCPD dead-battery function; a high level on PA10 activates the UCPD1_CC2 pull-down (5.1 kΩ) on PB4, and additional function is UCPD1_DBCC2. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT_u) I/O with USB function; additional function USB_DM, alternate functions include SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT_u) I/O with USB function; additional function USB_DP, alternate functions include TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the SWDIO-JTMS debug function with internal pull-up activated, alternate functions include I2C1_SCL, IR_OUT, USART3_CTS and SAI1_SD_B. |
| 24 | PA14 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the SWCLK-JTCK debug function with internal pull-down activated, alternate functions include LPTIM1_OUT, I2C1_SDA, TIM8_CH2, USART2_TX and SAI1_FS_B. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; after reset it is the JTDI debug function with internal pull-up activated, alternate functions include TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, USART2_RX and TIM1_BKIN. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O; after reset it is the JTDO/TRACESWO debug function, alternate functions include TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, SPI1_SCK, USART2_TX and SAI1_SCK_B. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT_c) I/O with USB Type-C PD function; after reset it is the JTRST debug function with internal pull-up activated, and the UCPD1_CC2 pull-down (5.1 kΩ) is controlled by PA10. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O; alternate functions include TIM16_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1 and SAI1_SD_B. |
| 29 | PB6 | bidirectional | 5 V tolerant (FT_c) I/O with USB Type-C PD function; the UCPD1_CC1 pull-down (5.1 kΩ) is activated by a high level on PA9, alternate functions include TIM16_CH1N, TIM4_CH1, TIM8_CH1, USART1_TX, FDCAN2_TX and LPTIM1_ETR. |
| 30 | PB7 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O with additional function PVD_IN; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT and LPTIM1_IN2. |
| 31 | PB8-BOOT0 | bidirectional | 5 V tolerant (FT_f) Fm+ capable I/O that also serves as BOOT0 pin; it is recommended to set PB8 to a mode other than analog after startup to limit consumption if the pin is left unconnected. |
| 32 | VSS | power_in | Ground pin, which must always be connected to the external power supply ground within the permitted range. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `STM32G4A1KEU6`
- Footprint: `Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm`
- 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `stm32g4a1keu6-etched.step` / `stm32g4a1keu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g4a1keu6.step` / `stm32g4a1keu6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838844758687744) (200 pp, sha256 `cde1526cdcf6f83b`, retrieved 2026-10-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32g4a1keu6-datasheet.pdf)