main
Ray
Publish 0.2.0
e63633c
STM32F401CCU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32F401CCU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply, 1.65 V-3.6 V. Powers RTC, LSE, and backup registers when VDD is off. |
| 2 | PC13 | bidirectional | General-purpose 5 V-tolerant I/O. Supplied via the backup power switch (max sink 3 mA, 2 MHz / 30 pF limit). Alt functions: EVENTOUT; additional: RTC_TAMP1, RTC_OUT, RTC_TS. |
| 3 | PC14/OSC32_IN | bidirectional | GPIO (FT except in oscillator/analog mode) or low-speed 32.768 kHz LSE crystal input. Backup-domain I/O with limited drive. |
| 4 | PC15/OSC32_OUT | bidirectional | GPIO (FT except in oscillator/analog mode) or 32.768 kHz LSE crystal output. Backup-domain I/O. |
| 5 | PH0/OSC_IN | bidirectional | GPIO or main HSE crystal/clock input (4-26 MHz). FT except in oscillator/analog mode. |
| 6 | PH1/OSC_OUT | bidirectional | GPIO or main HSE crystal output. FT except in oscillator/analog mode. |
| 7 | NRST | bidirectional | Bidirectional device reset input/open-drain output with embedded weak pull-up (~40 kΩ). Active low. |
| 8 | VSSA/VREF- | power_in | Analog ground and negative ADC reference (tied together on this package). Connect to system ground. |
| 9 | VDDA/VREF+ | power_in | Analog supply and positive ADC reference (tied together on this package). 1.7 V-3.6 V. Decouple with 100 nF + 1 µF. |
| 10 | PA0-WKUP | bidirectional | GPIO (FT). Alt: USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT. Additional: ADC1_IN0, WKUP (wake-up from Standby). |
| 11 | PA1 | bidirectional | GPIO (FT). Alt: USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT. Additional: ADC1_IN1. |
| 12 | PA2 | bidirectional | GPIO (FT). Alt: USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT. Additional: ADC1_IN2. |
| 13 | PA3 | bidirectional | GPIO (FT). Alt: USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT. Additional: ADC1_IN3. |
| 14 | PA4 | bidirectional | GPIO (FT). Alt: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT. Additional: ADC1_IN4. |
| 15 | PA5 | bidirectional | GPIO (FT). Alt: SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT. Additional: ADC1_IN5. |
| 16 | PA6 | bidirectional | GPIO (FT). Alt: SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT. Additional: ADC1_IN6. |
| 17 | PA7 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT. Additional: ADC1_IN7. |
| 18 | PB0 | bidirectional | GPIO (FT). Alt: TIM1_CH2N, TIM3_CH3, EVENTOUT. Additional: ADC1_IN8. |
| 19 | PB1 | bidirectional | GPIO (FT). Alt: TIM1_CH3N, TIM3_CH4, EVENTOUT. Additional: ADC1_IN9. |
| 20 | PB2/BOOT1 | bidirectional | GPIO (FT). Alt: EVENTOUT. Additional: BOOT1 boot-mode selector (sampled at reset together with BOOT0). |
| 21 | PB10 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT. |
| 22 | VCAP_1 | passive | Internal 1.2 V regulator decoupling pin. Connect a 2.2 µF ceramic to VSS (see datasheet Table 15). |
| 23 | VSS | power_in | Digital ground. |
| 24 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. Decouple with 100 nF per pin plus a bulk cap. |
| 25 | PB12 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT. |
| 26 | PB13 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT. |
| 27 | PB14 | bidirectional | GPIO (FT). Alt: SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT. |
| 28 | PB15 | bidirectional | GPIO (FT). Alt: SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT. Additional: RTC_REFIN. |
| 29 | PA8 | bidirectional | GPIO (FT). Alt: I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT. |
| 30 | PA9 | bidirectional | GPIO (FT). Alt: I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT. Additional: OTG_FS_VBUS (USB VBUS sense). |
| 31 | PA10 | bidirectional | GPIO (FT). Alt: USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. Serves as USB OTG ID pin. |
| 32 | PA11 | bidirectional | GPIO (FT). Alt: USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D−), EVENTOUT. |
| 33 | PA12 | bidirectional | GPIO (FT). Alt: USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), EVENTOUT. |
| 34 | PA13/JTMS-SWDIO | bidirectional | GPIO (FT). Alt: JTMS/SWDIO debug data. Default after reset: SWDIO with internal pull-up. |
| 35 | VSS | power_in | Digital ground. |
| 36 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |
| 37 | PA14/JTCK-SWCLK | bidirectional | GPIO (FT). Alt: JTCK/SWCLK debug clock. Default after reset: SWCLK with internal pull-down. |
| 38 | PA15/JTDI | bidirectional | GPIO (FT). Alt: JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. Default after reset: JTDI with pull-up. |
| 39 | PB3/JTDO-SWO | bidirectional | GPIO (FT). Alt: JTDO/SWO trace, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT. |
| 40 | PB4/NJTRST | bidirectional | GPIO (FT). Alt: NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. Default after reset: NJTRST with pull-up. |
| 41 | PB5 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT. |
| 42 | PB6 | bidirectional | GPIO (FT). Alt: I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT. |
| 43 | PB7 | bidirectional | GPIO (FT). Alt: I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT. |
| 44 | BOOT0 | input | Boot-mode select input (dedicated BOOT0 pad). Also VPP for factory programming. Sampled at reset with BOOT1 to select main flash / system memory / SRAM boot. |
| 45 | PB8 | bidirectional | GPIO (FT). Alt: I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT. |
| 46 | PB9 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |
| 49 | EP | passive | ST p.117 (UFQFPN48 package information, note 3): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS, incl. VDDA, VDD, VBAT) | VDD-VSS | -0.3 | 4 | V | 57 | ||
| Input voltage for BOOT0 | VIN | 9 | V | 57 | |||
| Variation between different VDD power pins | /ΔVDDx/ | 50 | mV | 57 | |||
| Variation between all ground pins | /VSSX −VSS/ | 50 | mV | 57 | |||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 160 | mA | 58 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | -160 | mA | 58 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 58 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 58 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | sink | 58 | ||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | source | 58 | ||
| Total output current sunk by sum of all I/O and control pins | ΣIIO | 120 | mA | sink | 58 | ||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | -120 | mA | source | 58 | ||
| Injected current on FT pins | IINJ(PIN) | -5 | 0 | mA | FT pins | 58 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 58 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 58 | ||
| Maximum junction temperature | TJ | 125 | °C | 58 | |||
| Internal AHB clock frequency (Power Scale3) | fHCLK | 0 | 60 | MHz | Regulator ON, VOS[1:0] = 0x01 | 59 | |
| Internal AHB clock frequency (Power Scale2) | fHCLK | 0 | 84 | MHz | Regulator ON, VOS[1:0] = 0x10 | 59 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 42 | MHz | 59 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 84 | MHz | 59 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 59 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 M samples; must be same potential as VDD | 59 | |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 M samples | 59 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 59 | ||
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON, VOS[1:0] = 0x01, max frequency 60 MHz | 59 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator ON, VOS[1:0] = 0x10, max frequency 84 MHz | 59 |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 59 | |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 59 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 59 | ||
| Maximum allowed package power dissipation (UFQFPN48) | PD | 625 | mW | suffix 6 and 7 | 59 | ||
| Ambient temperature, 6 suffix version (maximum power dissipation) | TA | -40 | 85 | °C | 6 suffix version, maximum power dissipation | 60 | |
| Ambient temperature, 6 suffix version (low power dissipation) | TA | -40 | 105 | °C | 6 suffix version, low power dissipation | 60 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 6 suffix version | 60 | |
| ESR of external capacitor on VCAP_1/VCAP_2 | ESR | 2 | Ω | ESR of external capacitor with available VCAP_1 and VCAP_2 pins | 61 | ||
| VDD rise time rate (power-up) | tVDD | 20 | µs/V | 61 | |||
| VDD fall time rate (power-down) | tVDD | 20 | µs/V | 61 | |||
| Programmable voltage detector level (rising edge) | VPVD | 2.09 | 2.14 | 2.19 | V | PLS[2:0]=000 (rising edge) | 62 |
| Programmable voltage detector level (falling edge) | VPVD | 1.98 | 2.04 | 2.08 | V | PLS[2:0]=000 (falling edge) | 62 |
| Programmable voltage detector level (rising edge) | VPVD | 3.07 | 3.14 | 3.21 | V | PLS[2:0]=111 (rising edge) | 62 |
| Programmable voltage detector level (falling edge) | VPVD | 2.95 | 3.03 | 3.09 | V | PLS[2:0]=111 (falling edge) | 62 |
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 62 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 62 |
| Brownout level 1 threshold (falling edge) | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 63 |
| Brownout level 1 threshold (rising edge) | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 63 |
| Brownout level 2 threshold (falling edge) | VBOR2 | 2.44 | 2.5 | 2.56 | V | Falling edge | 63 |
| Brownout level 2 threshold (rising edge) | VBOR2 | 2.53 | 2.59 | 2.63 | V | Rising edge | 63 |
| Brownout level 3 threshold (falling edge) | VBOR3 | 2.75 | 2.83 | 2.88 | V | Falling edge | 63 |
| Brownout level 3 threshold (rising edge) | VBOR3 | 2.85 | 2.92 | 2.97 | V | Rising edge | 63 |
| POR reset timing | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 63 | |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) | IRUSH | 160 | 200 | mA | 63 | ||
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) | ERUSH | 5.4 | µC | VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 µs | 63 | ||
| PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 80 | |
| PLL multiplier output clock | fPLL_OUT | 24 | 84 | MHz | 80 | ||
| PLL VCO output | fVCO_OUT | 192 | 432 | MHz | 80 | ||
| 48 MHz PLL multiplier output clock | fPLL48_OUT | 48 | 75 | MHz | 80 | ||
| Oscillator frequency (HSE) | fOSC_IN | 4 | 26 | MHz | 76 | ||
| External user clock source frequency (HSE) | fHSE_ext | 1 | 50 | MHz | 74 | ||
| Duty cycle (HSE external clock) | DuCy(HSE) | 45 | 55 | % | 74 | ||
| External user clock source frequency (LSE) | fLSE_ext | 32.768 | 1000 | kHz | 75 | ||
| Frequency (LSI) | fLSI | 17 | 32 | 47 | kHz | 79 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32F401CCU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32f401ccu6-etched.step/stm32f401ccu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f401ccu6.step/stm32f401ccu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (134 pp, sha256
7b6573ad963ab63b, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# STM32F401CCU6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32F401CCU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply, 1.65 V-3.6 V. Powers RTC, LSE, and backup registers when VDD is off. |
| 2 | PC13 | bidirectional | General-purpose 5 V-tolerant I/O. Supplied via the backup power switch (max sink 3 mA, 2 MHz / 30 pF limit). Alt functions: EVENTOUT; additional: RTC_TAMP1, RTC_OUT, RTC_TS. |
| 3 | PC14/OSC32_IN | bidirectional | GPIO (FT except in oscillator/analog mode) or low-speed 32.768 kHz LSE crystal input. Backup-domain I/O with limited drive. |
| 4 | PC15/OSC32_OUT | bidirectional | GPIO (FT except in oscillator/analog mode) or 32.768 kHz LSE crystal output. Backup-domain I/O. |
| 5 | PH0/OSC_IN | bidirectional | GPIO or main HSE crystal/clock input (4-26 MHz). FT except in oscillator/analog mode. |
| 6 | PH1/OSC_OUT | bidirectional | GPIO or main HSE crystal output. FT except in oscillator/analog mode. |
| 7 | NRST | bidirectional | Bidirectional device reset input/open-drain output with embedded weak pull-up (~40 kΩ). Active low. |
| 8 | VSSA/VREF- | power_in | Analog ground and negative ADC reference (tied together on this package). Connect to system ground. |
| 9 | VDDA/VREF+ | power_in | Analog supply and positive ADC reference (tied together on this package). 1.7 V-3.6 V. Decouple with 100 nF + 1 µF. |
| 10 | PA0-WKUP | bidirectional | GPIO (FT). Alt: USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT. Additional: ADC1_IN0, WKUP (wake-up from Standby). |
| 11 | PA1 | bidirectional | GPIO (FT). Alt: USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT. Additional: ADC1_IN1. |
| 12 | PA2 | bidirectional | GPIO (FT). Alt: USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT. Additional: ADC1_IN2. |
| 13 | PA3 | bidirectional | GPIO (FT). Alt: USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT. Additional: ADC1_IN3. |
| 14 | PA4 | bidirectional | GPIO (FT). Alt: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT. Additional: ADC1_IN4. |
| 15 | PA5 | bidirectional | GPIO (FT). Alt: SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT. Additional: ADC1_IN5. |
| 16 | PA6 | bidirectional | GPIO (FT). Alt: SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT. Additional: ADC1_IN6. |
| 17 | PA7 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT. Additional: ADC1_IN7. |
| 18 | PB0 | bidirectional | GPIO (FT). Alt: TIM1_CH2N, TIM3_CH3, EVENTOUT. Additional: ADC1_IN8. |
| 19 | PB1 | bidirectional | GPIO (FT). Alt: TIM1_CH3N, TIM3_CH4, EVENTOUT. Additional: ADC1_IN9. |
| 20 | PB2/BOOT1 | bidirectional | GPIO (FT). Alt: EVENTOUT. Additional: BOOT1 boot-mode selector (sampled at reset together with BOOT0). |
| 21 | PB10 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT. |
| 22 | VCAP_1 | passive | Internal 1.2 V regulator decoupling pin. Connect a 2.2 µF ceramic to VSS (see datasheet Table 15). |
| 23 | VSS | power_in | Digital ground. |
| 24 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. Decouple with 100 nF per pin plus a bulk cap. |
| 25 | PB12 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT. |
| 26 | PB13 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT. |
| 27 | PB14 | bidirectional | GPIO (FT). Alt: SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT. |
| 28 | PB15 | bidirectional | GPIO (FT). Alt: SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT. Additional: RTC_REFIN. |
| 29 | PA8 | bidirectional | GPIO (FT). Alt: I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT. |
| 30 | PA9 | bidirectional | GPIO (FT). Alt: I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT. Additional: OTG_FS_VBUS (USB VBUS sense). |
| 31 | PA10 | bidirectional | GPIO (FT). Alt: USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. Serves as USB OTG ID pin. |
| 32 | PA11 | bidirectional | GPIO (FT). Alt: USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D−), EVENTOUT. |
| 33 | PA12 | bidirectional | GPIO (FT). Alt: USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), EVENTOUT. |
| 34 | PA13/JTMS-SWDIO | bidirectional | GPIO (FT). Alt: JTMS/SWDIO debug data. Default after reset: SWDIO with internal pull-up. |
| 35 | VSS | power_in | Digital ground. |
| 36 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |
| 37 | PA14/JTCK-SWCLK | bidirectional | GPIO (FT). Alt: JTCK/SWCLK debug clock. Default after reset: SWCLK with internal pull-down. |
| 38 | PA15/JTDI | bidirectional | GPIO (FT). Alt: JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. Default after reset: JTDI with pull-up. |
| 39 | PB3/JTDO-SWO | bidirectional | GPIO (FT). Alt: JTDO/SWO trace, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT. |
| 40 | PB4/NJTRST | bidirectional | GPIO (FT). Alt: NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. Default after reset: NJTRST with pull-up. |
| 41 | PB5 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT. |
| 42 | PB6 | bidirectional | GPIO (FT). Alt: I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT. |
| 43 | PB7 | bidirectional | GPIO (FT). Alt: I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT. |
| 44 | BOOT0 | input | Boot-mode select input (dedicated BOOT0 pad). Also VPP for factory programming. Sampled at reset with BOOT1 to select main flash / system memory / SRAM boot. |
| 45 | PB8 | bidirectional | GPIO (FT). Alt: I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT. |
| 46 | PB9 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |
| 49 | EP | passive | ST p.117 (UFQFPN48 package information, note 3): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS, incl. VDDA, VDD, VBAT) | VDD-VSS | -0.3 | | 4 | V | | 57 |
| Input voltage for BOOT0 | VIN | | | 9 | V | | 57 |
| Variation between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 57 |
| Variation between all ground pins | /VSSX −VSS/ | | | 50 | mV | | 57 |
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | | | 160 | mA | | 58 |
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | | | -160 | mA | | 58 |
| Maximum current into each VDD_x power line (source) | IVDD | | | 100 | mA | | 58 |
| Maximum current out of each VSS_x ground line (sink) | IVSS | | | -100 | mA | | 58 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | sink | 58 |
| Output current sourced by any I/O and control pin | IIO | | | -25 | mA | source | 58 |
| Total output current sunk by sum of all I/O and control pins | ΣIIO | | | 120 | mA | sink | 58 |
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | | | -120 | mA | source | 58 |
| Injected current on FT pins | IINJ(PIN) | -5 | | 0 | mA | FT pins | 58 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 58 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 58 |
| Maximum junction temperature | TJ | | | 125 | °C | | 58 |
| Internal AHB clock frequency (Power Scale3) | fHCLK | 0 | | 60 | MHz | Regulator ON, VOS[1:0] = 0x01 | 59 |
| Internal AHB clock frequency (Power Scale2) | fHCLK | 0 | | 84 | MHz | Regulator ON, VOS[1:0] = 0x10 | 59 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 42 | MHz | | 59 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 84 | MHz | | 59 |
| Standard operating voltage | VDD | 1.7 | | 3.6 | V | | 59 |
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | | 2.4 | V | ADC limited to 1.2 M samples; must be same potential as VDD | 59 |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | | 3.6 | V | ADC limited to 2.4 M samples | 59 |
| Backup operating voltage | VBAT | 1.65 | | 3.6 | V | | 59 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON, VOS[1:0] = 0x01, max frequency 60 MHz | 59 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator ON, VOS[1:0] = 0x10, max frequency 84 MHz | 59 |
| Input voltage on RST and FT pins | VIN | -0.3 | | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 59 |
| Input voltage on RST and FT pins | VIN | -0.3 | | 5.2 | V | VDD ≤ 2 V | 59 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | | 59 |
| Maximum allowed package power dissipation (UFQFPN48) | PD | | | 625 | mW | suffix 6 and 7 | 59 |
| Ambient temperature, 6 suffix version (maximum power dissipation) | TA | -40 | | 85 | °C | 6 suffix version, maximum power dissipation | 60 |
| Ambient temperature, 6 suffix version (low power dissipation) | TA | -40 | | 105 | °C | 6 suffix version, low power dissipation | 60 |
| Junction temperature range, 6 suffix version | TJ | -40 | | 105 | °C | 6 suffix version | 60 |
| ESR of external capacitor on VCAP_1/VCAP_2 | ESR | | | 2 | Ω | ESR of external capacitor with available VCAP_1 and VCAP_2 pins | 61 |
| VDD rise time rate (power-up) | tVDD | 20 | | | µs/V | | 61 |
| VDD fall time rate (power-down) | tVDD | 20 | | | µs/V | | 61 |
| Programmable voltage detector level (rising edge) | VPVD | 2.09 | 2.14 | 2.19 | V | PLS[2:0]=000 (rising edge) | 62 |
| Programmable voltage detector level (falling edge) | VPVD | 1.98 | 2.04 | 2.08 | V | PLS[2:0]=000 (falling edge) | 62 |
| Programmable voltage detector level (rising edge) | VPVD | 3.07 | 3.14 | 3.21 | V | PLS[2:0]=111 (rising edge) | 62 |
| Programmable voltage detector level (falling edge) | VPVD | 2.95 | 3.03 | 3.09 | V | PLS[2:0]=111 (falling edge) | 62 |
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 62 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 62 |
| Brownout level 1 threshold (falling edge) | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 63 |
| Brownout level 1 threshold (rising edge) | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 63 |
| Brownout level 2 threshold (falling edge) | VBOR2 | 2.44 | 2.5 | 2.56 | V | Falling edge | 63 |
| Brownout level 2 threshold (rising edge) | VBOR2 | 2.53 | 2.59 | 2.63 | V | Rising edge | 63 |
| Brownout level 3 threshold (falling edge) | VBOR3 | 2.75 | 2.83 | 2.88 | V | Falling edge | 63 |
| Brownout level 3 threshold (rising edge) | VBOR3 | 2.85 | 2.92 | 2.97 | V | Rising edge | 63 |
| POR reset timing | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | | 63 |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) | IRUSH | | 160 | 200 | mA | | 63 |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) | ERUSH | | | 5.4 | µC | VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 µs | 63 |
| PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | | 80 |
| PLL multiplier output clock | fPLL_OUT | 24 | | 84 | MHz | | 80 |
| PLL VCO output | fVCO_OUT | 192 | | 432 | MHz | | 80 |
| 48 MHz PLL multiplier output clock | fPLL48_OUT | | 48 | 75 | MHz | | 80 |
| Oscillator frequency (HSE) | fOSC_IN | 4 | | 26 | MHz | | 76 |
| External user clock source frequency (HSE) | fHSE_ext | 1 | | 50 | MHz | | 74 |
| Duty cycle (HSE external clock) | DuCy(HSE) | 45 | | 55 | % | | 74 |
| External user clock source frequency (LSE) | fLSE_ext | | 32.768 | 1000 | kHz | | 75 |
| Frequency (LSI) | fLSI | 17 | 32 | 47 | kHz | | 79 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `STM32F401CCU6`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: UFQFPN-48(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm32f401ccu6-etched.step` / `stm32f401ccu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f401ccu6.step` / `stm32f401ccu6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8576163259906785280) (134 pp, sha256 `7b6573ad963ab63b`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/stm32f401ccu6-datasheet.pdf)