main
Ray Initial commit: component/stm32f103c6t7a db796fc

STM32F103C6T7A

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32F103C6T7A from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply for RTC and backup registers, 1.8 to 3.6 V
2 PC13-TAMPER-RTC bidirectional GPIO port C pin 13 with TAMPER-RTC function, output current limited to 3 mA maximum, speed not to exceed 2 MHz with 30 pF load
3 PC14-OSC32_IN bidirectional GPIO port C pin 14, external 32 kHz oscillator input pin
4 PC15-OSC32_OUT bidirectional GPIO port C pin 15, external 32 kHz oscillator output pin
5 OSC_IN input High-speed external clock input pin for 4 to 16 MHz crystal/ceramic resonator oscillator
6 OSC_OUT output High-speed external clock output pin for 4 to 16 MHz crystal/ceramic resonator oscillator
7 NRST bidirectional Active low external reset pin with integrated pull-up resistor and Schmitt trigger input, filtered 100 ns minimum
8 VSSA power_in Analog ground reference for ADC and internal circuitry, must be connected to VSS
9 VDDA power_in Analog power supply for ADC and internal reference voltage, 2.4 to 3.6 V when ADC is used
10 PA0-WKUP bidirectional GPIO port A pin 0 with wakeup capability from Standby mode, alternate functions include USART2_CTS, ADC12_IN0, TIM2_CH1_ETR
11 PA1 bidirectional GPIO port A pin 1, alternate functions include USART2_RTS, ADC12_IN1, TIM2_CH2
12 PA2 bidirectional GPIO port A pin 2, alternate functions include USART2_TX, ADC12_IN2, TIM2_CH3
13 PA3 bidirectional GPIO port A pin 3, alternate functions include USART2_RX, ADC12_IN3, TIM2_CH4
14 PA4 bidirectional GPIO port A pin 4, alternate functions include SPI1_NSS, USART2_CK, ADC12_IN4
15 PA5 bidirectional GPIO port A pin 5, alternate functions include SPI1_SCK, ADC12_IN5
16 PA6 bidirectional 5 V tolerant GPIO port A pin 6, alternate functions include SPI1_MISO (default), ADC12_IN6, TIM3_CH1, TIM1_BKIN (remap)
17 PA7 bidirectional 5 V tolerant GPIO port A pin 7, alternate functions include SPI1_MOSI (default), ADC12_IN7, TIM3_CH2, TIM1_CH1N (remap)
18 PB0 bidirectional GPIO port B pin 0, alternate functions include ADC12_IN8, TIM3_CH3 (default), TIM1_CH2N (remap)
19 PB1 bidirectional GPIO port B pin 1, alternate functions include ADC12_IN9, TIM3_CH4 (default), TIM1_CH3N (remap)
20 PB2 bidirectional 5 V tolerant GPIO port B pin 2 with BOOT1 functionality
21 PB10 bidirectional 5 V tolerant GPIO port B pin 10, alternate functions include TIM2_CH3 (remap)
22 PB11 bidirectional 5 V tolerant GPIO port B pin 11, alternate functions include TIM2_CH4 (remap)
23 VSS_1 power_in Ground reference for main power supply
24 VDD_1 power_in Main power supply for I/Os and core, 2.0 to 3.6 V
25 PB12 bidirectional 5 V tolerant GPIO port B pin 12, alternate functions include TIM1_BKIN
26 PB13 bidirectional 5 V tolerant GPIO port B pin 13, alternate functions include TIM1_CH1N
27 PB14 bidirectional 5 V tolerant GPIO port B pin 14, alternate functions include TIM1_CH2N
28 PB15 bidirectional 5 V tolerant GPIO port B pin 15, alternate functions include TIM1_CH3N
29 PA8 bidirectional 5 V tolerant GPIO port A pin 8, alternate functions include USART1_CK, TIM1_CH1, MCO (microcontroller clock output)
30 PA9 bidirectional 5 V tolerant GPIO port A pin 9, alternate functions include USART1_TX (default), TIM1_CH2 (default)
31 PA10 bidirectional 5 V tolerant GPIO port A pin 10, alternate functions include USART1_RX (default), TIM1_CH3
32 PA11 bidirectional 5 V tolerant GPIO port A pin 11, alternate functions include USART1_CTS, CAN_RX (default), TIM1_CH4, USBDM
33 PA12 bidirectional 5 V tolerant GPIO port A pin 12, alternate functions include USART1_RTS, CAN_TX (default), TIM1_ETR, USBDP
34 PA13 bidirectional 5 V tolerant JTMS/SWDIO debug pin for JTAG and serial wire debug interface
35 VSS_2 power_in Ground reference for main power supply
36 VDD_2 power_in Main power supply for I/Os and core, 2.0 to 3.6 V
37 PA14 bidirectional 5 V tolerant JTCK/SWCLK debug pin for JTAG and serial wire debug interface
38 PA15 bidirectional 5 V tolerant JTDI debug pin, alternate functions include TIM2_CH1_ETR (remap), SPI1_NSS (remap)
39 PB3 bidirectional 5 V tolerant JTDO debug pin, alternate functions include TIM2_CH2 (remap), TRACESWO (remap)
40 PB4 bidirectional 5 V tolerant NJTRST debug pin, alternate functions include TIM3_CH1 (remap), SPI1_MISO (remap)
41 PB5 bidirectional GPIO port B pin 5, alternate functions include I2C1_SMBA, TIM3_CH2 (remap), SPI1_MOSI (remap)
42 PB6 bidirectional 5 V tolerant GPIO port B pin 6, alternate functions include I2C1_SCL (default), USART1_TX
43 PB7 bidirectional 5 V tolerant GPIO port B pin 7, alternate functions include I2C1_SDA (default), USART1_RX
44 BOOT0 input Boot mode selection pin sampled at power-up and external reset to select boot from User Flash, System Memory, or embedded SRAM
45 PB8 bidirectional 5 V tolerant GPIO port B pin 8, alternate functions include I2C1_SCL (remap), CAN_RX (remap)
46 PB9 bidirectional 5 V tolerant GPIO port B pin 9, alternate functions include I2C1_SDA (remap), CAN_TX (remap)
47 VSS_3 power_in Ground reference for main power supply
48 VDD_3 power_in Main power supply for I/Os and core, 2.0 to 3.6 V

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

CAD (KiCad official)

  • Symbol: STM32F103C6T7A
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f103c6t7a-etched.step / stm32f103c6t7a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f103c6t7a.step / stm32f103c6t7a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (99 pp, sha256 31ab1fe3de6e6cf3, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF