← Commit history

Initial commit: component/stm32f103c6t7a

Ray ·db796fcdf8 ·
2 files changed +467
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F103C6T7A++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F103C6T7A from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply for RTC and backup registers, 1.8 to 3.6 V |+| 2 | PC13-TAMPER-RTC | bidirectional | GPIO port C pin 13 with TAMPER-RTC function, output current limited to 3 mA maximum, speed not to exceed 2 MHz with 30 pF load |+| 3 | PC14-OSC32_IN | bidirectional | GPIO port C pin 14, external 32 kHz oscillator input pin |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO port C pin 15, external 32 kHz oscillator output pin |+| 5 | OSC_IN | input | High-speed external clock input pin for 4 to 16 MHz crystal/ceramic resonator oscillator |+| 6 | OSC_OUT | output | High-speed external clock output pin for 4 to 16 MHz crystal/ceramic resonator oscillator |+| 7 | NRST | bidirectional | Active low external reset pin with integrated pull-up resistor and Schmitt trigger input, filtered 100 ns minimum |+| 8 | VSSA | power_in | Analog ground reference for ADC and internal circuitry, must be connected to VSS |+| 9 | VDDA | power_in | Analog power supply for ADC and internal reference voltage, 2.4 to 3.6 V when ADC is used |+| 10 | PA0-WKUP | bidirectional | GPIO port A pin 0 with wakeup capability from Standby mode, alternate functions include USART2_CTS, ADC12_IN0, TIM2_CH1_ETR |+| 11 | PA1 | bidirectional | GPIO port A pin 1, alternate functions include USART2_RTS, ADC12_IN1, TIM2_CH2 |+| 12 | PA2 | bidirectional | GPIO port A pin 2, alternate functions include USART2_TX, ADC12_IN2, TIM2_CH3 |+| 13 | PA3 | bidirectional | GPIO port A pin 3, alternate functions include USART2_RX, ADC12_IN3, TIM2_CH4 |+| 14 | PA4 | bidirectional | GPIO port A pin 4, alternate functions include SPI1_NSS, USART2_CK, ADC12_IN4 |+| 15 | PA5 | bidirectional | GPIO port A pin 5, alternate functions include SPI1_SCK, ADC12_IN5 |+| 16 | PA6 | bidirectional | 5 V tolerant GPIO port A pin 6, alternate functions include SPI1_MISO (default), ADC12_IN6, TIM3_CH1, TIM1_BKIN (remap) |+| 17 | PA7 | bidirectional | 5 V tolerant GPIO port A pin 7, alternate functions include SPI1_MOSI (default), ADC12_IN7, TIM3_CH2, TIM1_CH1N (remap) |+| 18 | PB0 | bidirectional | GPIO port B pin 0, alternate functions include ADC12_IN8, TIM3_CH3 (default), TIM1_CH2N (remap) |+| 19 | PB1 | bidirectional | GPIO port B pin 1, alternate functions include ADC12_IN9, TIM3_CH4 (default), TIM1_CH3N (remap) |+| 20 | PB2 | bidirectional | 5 V tolerant GPIO port B pin 2 with BOOT1 functionality |+| 21 | PB10 | bidirectional | 5 V tolerant GPIO port B pin 10, alternate functions include TIM2_CH3 (remap) |+| 22 | PB11 | bidirectional | 5 V tolerant GPIO port B pin 11, alternate functions include TIM2_CH4 (remap) |+| 23 | VSS_1 | power_in | Ground reference for main power supply |+| 24 | VDD_1 | power_in | Main power supply for I/Os and core, 2.0 to 3.6 V |+| 25 | PB12 | bidirectional | 5 V tolerant GPIO port B pin 12, alternate functions include TIM1_BKIN |+| 26 | PB13 | bidirectional | 5 V tolerant GPIO port B pin 13, alternate functions include TIM1_CH1N |+| 27 | PB14 | bidirectional | 5 V tolerant GPIO port B pin 14, alternate functions include TIM1_CH2N |+| 28 | PB15 | bidirectional | 5 V tolerant GPIO port B pin 15, alternate functions include TIM1_CH3N |+| 29 | PA8 | bidirectional | 5 V tolerant GPIO port A pin 8, alternate functions include USART1_CK, TIM1_CH1, MCO (microcontroller clock output) |+| 30 | PA9 | bidirectional | 5 V tolerant GPIO port A pin 9, alternate functions include USART1_TX (default), TIM1_CH2 (default) |+| 31 | PA10 | bidirectional | 5 V tolerant GPIO port A pin 10, alternate functions include USART1_RX (default), TIM1_CH3 |+| 32 | PA11 | bidirectional | 5 V tolerant GPIO port A pin 11, alternate functions include USART1_CTS, CAN_RX (default), TIM1_CH4, USBDM |+| 33 | PA12 | bidirectional | 5 V tolerant GPIO port A pin 12, alternate functions include USART1_RTS, CAN_TX (default), TIM1_ETR, USBDP |+| 34 | PA13 | bidirectional | 5 V tolerant JTMS/SWDIO debug pin for JTAG and serial wire debug interface |+| 35 | VSS_2 | power_in | Ground reference for main power supply |+| 36 | VDD_2 | power_in | Main power supply for I/Os and core, 2.0 to 3.6 V |+| 37 | PA14 | bidirectional | 5 V tolerant JTCK/SWCLK debug pin for JTAG and serial wire debug interface |+| 38 | PA15 | bidirectional | 5 V tolerant JTDI debug pin, alternate functions include TIM2_CH1_ETR (remap), SPI1_NSS (remap) |+| 39 | PB3 | bidirectional | 5 V tolerant JTDO debug pin, alternate functions include TIM2_CH2 (remap), TRACESWO (remap) |+| 40 | PB4 | bidirectional | 5 V tolerant NJTRST debug pin, alternate functions include TIM3_CH1 (remap), SPI1_MISO (remap) |+| 41 | PB5 | bidirectional | GPIO port B pin 5, alternate functions include I2C1_SMBA, TIM3_CH2 (remap), SPI1_MOSI (remap) |+| 42 | PB6 | bidirectional | 5 V tolerant GPIO port B pin 6, alternate functions include I2C1_SCL (default), USART1_TX |+| 43 | PB7 | bidirectional | 5 V tolerant GPIO port B pin 7, alternate functions include I2C1_SDA (default), USART1_RX |+| 44 | BOOT0 | input | Boot mode selection pin sampled at power-up and external reset to select boot from User Flash, System Memory, or embedded SRAM |+| 45 | PB8 | bidirectional | 5 V tolerant GPIO port B pin 8, alternate functions include I2C1_SCL (remap), CAN_RX (remap) |+| 46 | PB9 | bidirectional | 5 V tolerant GPIO port B pin 9, alternate functions include I2C1_SDA (remap), CAN_TX (remap) |+| 47 | VSS_3 | power_in | Ground reference for main power supply |+| 48 | VDD_3 | power_in | Main power supply for I/Os and core, 2.0 to 3.6 V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F103C6T7A`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f103c6t7a-etched.step` / `stm32f103c6t7a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f103c6t7a.step` / `stm32f103c6t7a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183527029215232) (99 pp, sha256 `31ab1fe3de6e6cf3`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f103c6t7a-datasheet.pdf)
page.jsonadded+383
@@ -0,0 +1,383 @@+{+  "slug": "stm32f103c6t7a",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f103c6t7a",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f103c6t7a.kicad_sym",+    "stm32f103c6t7a.kicad_mod",+    "stm32f103c6t7a.glb",+    "stm32f103c6t7a.step",+    "stm32f103c6t7a.lbr",+    "docs/hero.png",+    "docs/stm32f103c6t7a-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F103C6T7A",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183527029215232",+    "parts": {+      "symbol": "stm32f103c6t7a.kicad_sym",+      "footprint": "stm32f103c6t7a.kicad_mod",+      "model_3d": "stm32f103c6t7a-etched.glb",+      "model_3d_plain": "stm32f103c6t7a.glb",+      "model_3d_step": "stm32f103c6t7a-etched.step",+      "model_3d_step_plain": "stm32f103c6t7a.step",+      "lbr": "stm32f103c6t7a.lbr"+    },+    "distributor_links": {+      "lcsc": "C222074"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply for RTC and backup registers, 1.8 to 3.6 V"+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "GPIO port C pin 13 with TAMPER-RTC function, output current limited to 3 mA maximum, speed not to exceed 2 MHz with 30 pF load"+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO port C pin 14, external 32 kHz oscillator input pin"+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO port C pin 15, external 32 kHz oscillator output pin"+      },+      {+        "number": "5",+        "name": "OSC_IN",+        "type": "input",+        "description": "High-speed external clock input pin for 4 to 16 MHz crystal/ceramic resonator oscillator"+      },+      {+        "number": "6",+        "name": "OSC_OUT",+        "type": "output",+        "description": "High-speed external clock output pin for 4 to 16 MHz crystal/ceramic resonator oscillator"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active low external reset pin with integrated pull-up resistor and Schmitt trigger input, filtered 100 ns minimum"+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference for ADC and internal circuitry, must be connected to VSS"+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply for ADC and internal reference voltage, 2.4 to 3.6 V when ADC is used"+      },+      {+        "number": "10",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO port A pin 0 with wakeup capability from Standby mode, alternate functions include USART2_CTS, ADC12_IN0, TIM2_CH1_ETR"+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1, alternate functions include USART2_RTS, ADC12_IN1, TIM2_CH2"+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2, alternate functions include USART2_TX, ADC12_IN2, TIM2_CH3"+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3, alternate functions include USART2_RX, ADC12_IN3, TIM2_CH4"+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4, alternate functions include SPI1_NSS, USART2_CK, ADC12_IN4"+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5, alternate functions include SPI1_SCK, ADC12_IN5"+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 6, alternate functions include SPI1_MISO (default), ADC12_IN6, TIM3_CH1, TIM1_BKIN (remap)"+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 7, alternate functions include SPI1_MOSI (default), ADC12_IN7, TIM3_CH2, TIM1_CH1N (remap)"+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B pin 0, alternate functions include ADC12_IN8, TIM3_CH3 (default), TIM1_CH2N (remap)"+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1, alternate functions include ADC12_IN9, TIM3_CH4 (default), TIM1_CH3N (remap)"+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 2 with BOOT1 functionality"+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 10, alternate functions include TIM2_CH3 (remap)"+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 11, alternate functions include TIM2_CH4 (remap)"+      },+      {+        "number": "23",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground reference for main power supply"+      },+      {+        "number": "24",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Main power supply for I/Os and core, 2.0 to 3.6 V"+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 12, alternate functions include TIM1_BKIN"+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 13, alternate functions include TIM1_CH1N"+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 14, alternate functions include TIM1_CH2N"+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 15, alternate functions include TIM1_CH3N"+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 8, alternate functions include USART1_CK, TIM1_CH1, MCO (microcontroller clock output)"+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 9, alternate functions include USART1_TX (default), TIM1_CH2 (default)"+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 10, alternate functions include USART1_RX (default), TIM1_CH3"+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 11, alternate functions include USART1_CTS, CAN_RX (default), TIM1_CH4, USBDM"+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port A pin 12, alternate functions include USART1_RTS, CAN_TX (default), TIM1_ETR, USBDP"+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V tolerant JTMS/SWDIO debug pin for JTAG and serial wire debug interface"+      },+      {+        "number": "35",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground reference for main power supply"+      },+      {+        "number": "36",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Main power supply for I/Os and core, 2.0 to 3.6 V"+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V tolerant JTCK/SWCLK debug pin for JTAG and serial wire debug interface"+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V tolerant JTDI debug pin, alternate functions include TIM2_CH1_ETR (remap), SPI1_NSS (remap)"+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V tolerant JTDO debug pin, alternate functions include TIM2_CH2 (remap), TRACESWO (remap)"+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V tolerant NJTRST debug pin, alternate functions include TIM3_CH1 (remap), SPI1_MISO (remap)"+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B pin 5, alternate functions include I2C1_SMBA, TIM3_CH2 (remap), SPI1_MOSI (remap)"+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 6, alternate functions include I2C1_SCL (default), USART1_TX"+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 7, alternate functions include I2C1_SDA (default), USART1_RX"+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot mode selection pin sampled at power-up and external reset to select boot from User Flash, System Memory, or embedded SRAM"+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 8, alternate functions include I2C1_SCL (remap), CAN_RX (remap)"+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO port B pin 9, alternate functions include I2C1_SDA (remap), CAN_TX (remap)"+      },+      {+        "number": "47",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground reference for main power supply"+      },+      {+        "number": "48",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Main power supply for I/Os and core, 2.0 to 3.6 V"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PC13, PC14, PC15 pins have limited output drive capability (3 mA maximum) and speed restrictions (ma; OSC_IN and OSC_OUT pins have specific frequency range (4-16 MHz) and crystal loading requirements pe; VDDA minimum voltage is 2.4 V only when ADC is used; 2.0 V minimum when ADC is not used per Table 9"+        ],+        "pages_sent": 99,+        "cost_usd": 0.9394,+        "at": "2026-09-24T07:23:30"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183527029215232",+        "pages": 99,+        "sha256": "31ab1fe3de6e6cf3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file