main
Ray Set visibility: public f62083a
{
  "schema_version": 1,
  "type": "component",
  "slug": "stm1061n28wx6f",
  "title": "STM1061N28WX6F",
  "brief": "STMicroelectronics Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "stm1061n28wx6f",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STM1061N28WX6F",
    "manufacturer": "STMicroelectronics",
    "package": "SOT-23-3",
    "pin_count": 3,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.st.com/resource/en/datasheet/stm1061n28wx6f.pdf",
    "parts": {
      "symbol": "stm1061n28wx6f.kicad_sym",
      "footprint": "stm1061n28wx6f.kicad_mod",
      "model_3d": "stm1061n28wx6f-hero.glb",
      "model_3d_plain": "stm1061n28wx6f-etched.glb",
      "model_3d_step": "stm1061n28wx6f-etched.step",
      "model_3d_step_plain": "stm1061n28wx6f.step",
      "lbr": "stm1061n28wx6f.lbr"
    },
    "distributor_links": {
      "lcsc": "C2070567",
      "mouser": "511-STM1061N28WX6F"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T18:53:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 313 calls left today"
      },
      "mouser": {
        "pn": "511-STM1061N28WX6F",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Active-low open drain output that goes low when VCC drops below VTH- and stays low until VCC rises above VTH+ (VTH- + VHYST), so a pull-up resistor to any supply up to 6V is required."
      },
      {
        "number": "2",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground, the reference for the power supply, which must be connected to the system ground."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage and input for the voltage detector, specified for 0.7 V to 6.0 V operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOT23-3 pin mapping is taken from Table 2 (Pin Functions) on page 7, which lists SOT23-3 pin 1 ="
        ],
        "pages_sent": 23,
        "cost_usd": 0.0052,
        "at": "2026-11-10T18:53:31"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stm1061n28wx6f.pdf",
        "pages": 23,
        "sha256": "5b1838531083a3d9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "SOT",
        "height_mm": 1.005,
        "height_basis": "datasheet A, midpoint of min and max",
        "standoff_mm": 0.05,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.36,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 1.90 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.2,
        "lead_thickness_basis": "default for pitch 1.90 mm, height 1.005 mm (no datasheet c read)"
      },
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm1061n28wx6f.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.37,
          2.92,
          1.005
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "947bf8560e5ec61d00b9bf072b66039c2a38feb31ec5826b8c27ae7a74e9331e",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm1061n28wx6f-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.37,
          2.92,
          1.005
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a201fb527c9fcbdab85a9367e9bc8376e0a38319524a6d4931016cace7210b25",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOT23-3",
      "source_page": 18,
      "D": {
        "nom_mm": 2.92,
        "range_mm": [
          2.8,
          3.04
        ]
      },
      "E1": {
        "nom_mm": 1.3,
        "range_mm": [
          1.2,
          1.4
        ]
      },
      "E": {
        "nom_mm": 2.37,
        "range_mm": [
          2.1,
          2.64
        ]
      },
      "e": {
        "nom_mm": 0.96,
        "range_mm": [
          0.89,
          1.03
        ]
      },
      "A": {
        "nom_mm": 1.005,
        "range_mm": [
          0.89,
          1.12
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm1061n28wx6f.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "SOT-23-3",
      "Category": "Power Management (PMIC)",
      "Pins": "3"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "5b1838531083a3d98b712b9d7d1ebcacff04baa27c96f0a239d1506b6be36f4e",
      "rows": [
        {
          "name": "VCC Operating Voltage",
          "symbol": "VCC",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Voltage (Measurement Conditions)",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Ambient Operating Temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Detect Voltage VTH– (suffix 28)",
          "symbol": "VTH–",
          "kind": "electrical",
          "unit": "V",
          "min": 2.744,
          "typ": 2.8,
          "max": 2.856,
          "conditions": "TA = 25°C, suffix 28 (Table 9)",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.9,
          "max": 3,
          "conditions": "VCC = 3.0V, no load",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 1.1,
          "max": 3.6,
          "conditions": "VCC = 5.5V, no load",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Output Current, N-channel",
          "symbol": "IOUT",
          "kind": "electrical",
          "unit": "mA",
          "min": 1,
          "typ": null,
          "max": 1.7,
          "conditions": "VDS = 0.5V, reset asserted, VCC = 1.0V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Output Current, N-channel",
          "symbol": "IOUT",
          "kind": "electrical",
          "unit": "mA",
          "min": 3,
          "typ": null,
          "max": 14,
          "conditions": "VDS = 0.5V, reset asserted, VCC = 2.0V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Output Current, N-channel",
          "symbol": "IOUT",
          "kind": "electrical",
          "unit": "mA",
          "min": 5,
          "typ": null,
          "max": 22,
          "conditions": "VDS = 0.5V, reset asserted, VCC = 3.0V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Output Current, N-channel",
          "symbol": "IOUT",
          "kind": "electrical",
          "unit": "mA",
          "min": 6,
          "typ": null,
          "max": 26,
          "conditions": "VDS = 0.5V, reset asserted, VCC = 4.0V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Output Current, N-channel",
          "symbol": "IOUT",
          "kind": "electrical",
          "unit": "mA",
          "min": 7,
          "typ": null,
          "max": 30,
          "conditions": "VDS = 0.5V, reset asserted, VCC = 5.0V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "VCC to OUT Detect Delay",
          "symbol": "tPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VCC falling from VTH– + 100mV to VTH– – 100mV at 10mV/µs",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "VCC to OUT Release Delay",
          "symbol": "tPR",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 30,
          "max": 200,
          "conditions": "VCC rising from VTH+ – 100mV to VTH+ + 100mV at 10mV/µs",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Threshold Temperature Coefficient",
          "symbol": "",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": -100,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature (VCC Off, VBAT Off)",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "VCC off, VBAT off",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Lead Solder Temperature",
          "symbol": "TSLD",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "for 10 seconds",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Input or Output Voltage",
          "symbol": "VIO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "VCC + 0.3 upper limit printed as expression",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Output Current",
          "symbol": "IO",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Power Dissipation",
          "symbol": "PD",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 320,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stm1061n28wx6f"
  ],
  "discovery_pitch": "STM1061N28WX6F (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm1061n28wx6f.kicad_sym",
    "stm1061n28wx6f.kicad_mod",
    "stm1061n28wx6f.glb",
    "stm1061n28wx6f.step",
    "stm1061n28wx6f.lbr",
    "docs/hero.png",
    "docs/stm1061n28wx6f-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm1061n28wx6f-hero.glb",
    "stm1061n28wx6f-hero.overlay.json",
    "stm1061n28wx6f-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}